Download or read book Statistical Rock Physics written by Gabor Korvin and published by Springer Nature. This book was released on with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lattice Boltzmann Modeling written by Michael C. Sukop and published by Springer Science & Business Media. This book was released on 2007-04-05 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a basic introduction to Lattice Boltzmann models that emphasizes intuition and simplistic conceptualization of processes, while avoiding the complex mathematics that underlies LB models. The model is viewed from a particle perspective where collisions, streaming, and particle-particle/particle-surface interactions constitute the entire conceptual framework. Beginners and those whose interest is in model application over detailed mathematics will find this a powerful 'quick start' guide. Example simulations, exercises, and computer codes are included.

Download or read book Reactive Transport in Porous Media written by Peter C. Lichtner and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-12-17 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 34 of Reviews in Mineralogy focuses on methods to describe the extent and consequences of reactive flow and transport in natural subsurface systems. Since the field of reactive transport within the Earth Sciences is a highly multidisciplinary area of research, including geochemistry, geology, physics, chemistry, hydrology, and engineering, this book is an attempt to some extent bridge the gap between these different disciplines. This volume contains the contributions presented at a short course held in Golden, Colorado, October 25-27, 1996 in conjunction with the Mineralogical Society of America's (MSA) Annual Meeting with the Geological Society of America in Denver, Colorado.

Download or read book Flowing Matter written by Federico Toschi and published by Springer Nature. This book was released on 2019-09-25 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book, published in the Soft and Biological Matter series, presents an introduction to selected research topics in the broad field of flowing matter, including the dynamics of fluids with a complex internal structure -from nematic fluids to soft glasses- as well as active matter and turbulent phenomena. Flowing matter is a subject at the crossroads between physics, mathematics, chemistry, engineering, biology and earth sciences, and relies on a multidisciplinary approach to describe the emergence of the macroscopic behaviours in a system from the coordinated dynamics of its microscopic constituents. Depending on the microscopic interactions, an assembly of molecules or of mesoscopic particles can flow like a simple Newtonian fluid, deform elastically like a solid or behave in a complex manner. When the internal constituents are active, as for biological entities, one generally observes complex large-scale collective motions. Phenomenology is further complicated by the invariable tendency of fluids to display chaos at the large scales or when stirred strongly enough. This volume presents several research topics that address these phenomena encompassing the traditional micro-, meso-, and macro-scales descriptions, and contributes to our understanding of the fundamentals of flowing matter. This book is the legacy of the COST Action MP1305 “Flowing Matter”.

Download or read book Characterization Modeling Monitoring and Remediation of Fractured Rock written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2021-01-29 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractured rock is the host or foundation for innumerable engineered structures related to energy, water, waste, and transportation. Characterizing, modeling, and monitoring fractured rock sites is critical to the functioning of those infrastructure, as well as to optimizing resource recovery and contaminant management. Characterization, Modeling, Monitoring, and Remediation of Fractured Rock examines the state of practice and state of art in the characterization of fractured rock and the chemical and biological processes related to subsurface contaminant fate and transport. This report examines new developments, knowledge, and approaches to engineering at fractured rock sites since the publication of the 1996 National Research Council report Rock Fractures and Fluid Flow: Contemporary Understanding and Fluid Flow. Fundamental understanding of the physical nature of fractured rock has changed little since 1996, but many new characterization tools have been developed, and there is now greater appreciation for the importance of chemical and biological processes that can occur in the fractured rock environment. The findings of Characterization, Modeling, Monitoring, and Remediation of Fractured Rock can be applied to all types of engineered infrastructure, but especially to engineered repositories for buried or stored waste and to fractured rock sites that have been contaminated as a result of past disposal or other practices. The recommendations of this report are intended to help the practitioner, researcher, and decision maker take a more interdisciplinary approach to engineering in the fractured rock environment. This report describes how existing tools-some only recently developed-can be used to increase the accuracy and reliability of engineering design and management given the interacting forces of nature. With an interdisciplinary approach, it is possible to conceptualize and model the fractured rock environment with acceptable levels of uncertainty and reliability, and to design systems that maximize remediation and long-term performance. Better scientific understanding could inform regulations, policies, and implementation guidelines related to infrastructure development and operations. The recommendations for research and applications to enhance practice of this book make it a valuable resource for students and practitioners in this field.

Download or read book Adsorption of Metals by Geomedia written by Everett Jenne and published by Elsevier. This book was released on 1998-04-28 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption of Metals by Geomedia, serves as a needed resource for this topic which has received much attention during the past 15 years. The book provides an in-depth review of the field, followed by numerouschapters that document the current status of adsorption research for a variety of metals by geomedia ranging from individual minerals to sediments and soils. Adsorption mechanisms are detailed and precipitation is presented as a distinct sorption process.Virtually all factors affecting the extent of metal adsorption are examined, including the effects of selected anions, competition among metals, pH, metal concentration, loading, variable metal adsorption capacity, ionic strength, hydrogen exchange and stoichiometry, and solids concentration. A variety of adsorption models are briefly presented and some are used to extend laboratory studies to field sites. The book is comprised of a collection of papers contributed by leading investigators from Canada, France, the Netherlands, the United Kingdom and the US. - Includes a wide-ranging review of the status of adsorption research and a prospectus on future research - Details all known factors affecting the extent of adsorption - Covers basic adsorption equations and interrelationships - Clearly documents experimental procedures - Presents adsorption data for eleven metals and three other elements - Uses normalization to greatly reduce apparent variability among absorbents - Provides extensive literature citations and a comprehensive index

Download or read book Kinetics of Materials written by Robert W. Balluffi and published by John Wiley & Sons. This book was released on 2005-12-16 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classroom-tested textbook providing a fundamental understandingof basic kinetic processes in materials This textbook, reflecting the hands-on teaching experience of itsthree authors, evolved from Massachusetts Institute of Technology'sfirst-year graduate curriculum in the Department of MaterialsScience and Engineering. It discusses key topics collectivelyrepresenting the basic kinetic processes that cause changes in thesize, shape, composition, and atomistic structure of materials.Readers gain a deeper understanding of these kinetic processes andof the properties and applications of materials. Topics are introduced in a logical order, enabling students todevelop a solid foundation before advancing to more sophisticatedtopics. Kinetics of Materials begins with diffusion, offering adescription of the elementary manner in which atoms and moleculesmove around in solids and liquids. Next, the more complex motion ofdislocations and interfaces is addressed. Finally, still morecomplex kinetic phenomena, such as morphological evolution andphase transformations, are treated. Throughout the textbook, readers are instilled with an appreciationof the subject's analytic foundations and, in many cases, theapproximations commonly used in the field. The authors offer manyextensive derivations of important results to help illuminate theirorigins. While the principal focus is on kinetic phenomena incrystalline materials, select phenomena in noncrystalline materialsare also discussed. In many cases, the principles involved apply toall materials. Exercises with accompanying solutions are provided throughoutKinetics of Materials, enabling readers to put their newfoundknowledge into practice. In addition, bibliographies are offeredwith each chapter, helping readers to investigate specializedtopics in greater detail. Several appendices presenting importantbackground material are also included. With its unique range of topics, progressive structure, andextensive exercises, this classroom-tested textbook provides anenriching learning experience for first-year graduate students.

Download or read book Fundamentals of Preparative and Nonlinear Chromatography written by Georges Guiochon and published by Academic Press. This book was released on 2006-03-21 with total page 991 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Fundamentals of Preparative and Nonlinear Chromatography is devoted to the fundamentals of a new process of purification or extraction of chemicals or proteins widely used in the pharmaceutical industry and in preparative chromatography. This process permits the preparation of extremely pure compounds satisfying the requests of the US Food and Drug Administration. The book describes the fundamentals of thermodynamics, mass transfer kinetics, and flow through porous media that are relevant to chromatography. It presents the models used in chromatography and their solutions, discusses the applications made, describes the different processes used, their numerous applications, and the methods of optimization of the experimental conditions of this process.

Download or read book Biofilms in Wastewater Treatment written by Stefan Wuertz and published by IWA Publishing. This book was released on 2003-04-30 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The central theme of the book is the flow of information from experimental approaches in biofilm research to simulation and modeling of complex wastewater systems. Probably the greatest challenge in wastewater research lies in using the methods and the results obtained in one scientific discipline to design intelligent experiments in other disciplines, and eventually to improve the knowledge base the practitioner needs to run wastewater treatment plants. The purpose of Biofilms in Wastewater Treatment is to provide engineers with the knowledge needed to apply the new insights gained by researchers. The authors provide an authoritative insight into the function of biofilms on a technical and on a lab-scale, cover some of the exciting new basic microbiological and wastewater engineering research involving molecular biology techniques and microscopy, and discuss recent attempts to predict the development of biofilms. This book is divided into 3 sections: Modeling and Simulation; Architecture, Population Structure and Function; and From Fundamentals to Practical Application, which all start with a scientific question. Individual chapters attempt to answer the question and present different angles of looking at problems. In addition there is an extensive glossary to familiarize the non-expert with unfamiliar terminology used by microbiologists and computational scientists. The colour plate section of this book can be downloaded by clicking here. (PDF Format 1 MB)

Download or read book Homogenization and Porous Media written by Ulrich Hornung and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a systematic, rigorous treatment of upscaling procedures related to physical modeling for porous media on micro-, meso- and macro-scales, including detailed studies of micro-structure systems and computational results for dual-porosity models.

Download or read book Diffusion in Materials written by A.L. Laskar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the proceedings of the NATO Advanced Study Institute, "Diffusion in Materials", held at "Centre Paul Langevin", Aussois, during March 12-25, 1989. There were 105 participants of whom 24 were lecturers and members of the international advisory committee. In addition to the participants from NATO countries, a small number of participants came from Australia, Hungary, Poland and Tunisia. The principal aim of the organizing committee was to bring together scientists of wide interest and expertise in the field of diffusion and to familiarize the young workers in material science with the wide range of theoretical models and methods and of experimental techniques . The Institute was concerned with the study of diffusion and related phenomena in solids which are at the cutting edge of novel technologies. The discussion of basic theories of defects in solids and their transport, with their applications in the understanding of diffusion processes in "simple solids" was followed by the wide range of current theoretical models and methods, experimental techniques and their potential. The lectures on the diffusion in specific materials included : metals, dilute and concentrated alloys, simple and compound semiconductors, stoichiometric and non-stoichiometric oxides, high-Tc compounds, carbides, nitrides, silicates, conducting polymers and thin films, ionic, superionic, amorphous and irradiated materials.

Download or read book Multiscale Modeling and Simulation in Science written by Björn Engquist and published by Springer Science & Business Media. This book was released on 2009-02-11 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most problems in science involve many scales in time and space. An example is turbulent ?ow where the important large scale quantities of lift and drag of a wing depend on the behavior of the small vortices in the boundarylayer. Another example is chemical reactions with concentrations of the species varying over seconds and hours while the time scale of the oscillations of the chemical bonds is of the order of femtoseconds. A third example from structural mechanics is the stress and strain in a solid beam which is well described by macroscopic equations but at the tip of a crack modeling details on a microscale are needed. A common dif?culty with the simulation of these problems and many others in physics, chemistry and biology is that an attempt to represent all scales will lead to an enormous computational problem with unacceptably long computation times and large memory requirements. On the other hand, if the discretization at a coarse level ignoresthe?nescale informationthenthesolutionwillnotbephysicallymeaningful. The in?uence of the ?ne scales must be incorporated into the model. This volume is the result of a Summer School on Multiscale Modeling and S- ulation in Science held at Boso ¤n, Lidingo ¤ outside Stockholm, Sweden, in June 2007. Sixty PhD students from applied mathematics, the sciences and engineering parti- pated in the summer school.

Download or read book Dimensionless Physical Quantities in Science and Engineering written by Josef Kunes and published by Elsevier. This book was released on 2012-02-13 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dimensionless quantities, such as p, e, and f are used in mathematics, engineering, physics, and chemistry. In recent years the dimensionless groups, as demonstrated in detail here, have grown in significance and importance in contemporary mathematical and computer modeling as well as the traditional fields of physical modeling. This book offers the most comprehensive and up to date resource for dimensionless quantities, providing not only a summary of the quantities, but also a clarification of their physical principles, areas of use, and other specific properties across multiple relevant fields. Presenting the most complete and clearly explained single resource for dimensionless groups, this book will be essential for students and researchers working across the sciences. - Includes approximately 1,200 dimensionless quantities - Features both classic and newly developing fields - Easy to use with clear organization and citations to relevant works

Download or read book Mathematical Methods for Physical and Analytical Chemistry written by David Z. Goodson and published by John Wiley & Sons. This book was released on 2011-11-14 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Methods for Physical and Analytical Chemistry presents mathematical and statistical methods to students of chemistry at the intermediate, post-calculus level. The content includes a review of general calculus; a review of numerical techniques often omitted from calculus courses, such as cubic splines and Newton’s method; a detailed treatment of statistical methods for experimental data analysis; complex numbers; extrapolation; linear algebra; and differential equations. With numerous example problems and helpful anecdotes, this text gives chemistry students the mathematical knowledge they need to understand the analytical and physical chemistry professional literature.

Download or read book Crystallization Process Systems written by Alan G. Jones and published by Butterworth-Heinemann. This book was released on 2002-04-24 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particulate Crystal Characteristics; Fluid-particle Transport Processes; Crystallization Principles and Techniques; Crystal Formation Processes; Crystallizer Design and Operation; Solid-Liquid Separation Processes; Design of Crystallization Process Systems.

Download or read book Elementary Mechanics Using Matlab written by Anders Malthe-Sørenssen and published by Springer. This book was released on 2015-06-01 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book – specifically developed as a novel textbook on elementary classical mechanics – shows how analytical and numerical methods can be seamlessly integrated to solve physics problems. This approach allows students to solve more advanced and applied problems at an earlier stage and equips them to deal with real-world examples well beyond the typical special cases treated in standard textbooks. Another advantage of this approach is that students are brought closer to the way physics is actually discovered and applied, as they are introduced right from the start to a more exploratory way of understanding phenomena and of developing their physical concepts. While not a requirement, it is advantageous for the reader to have some prior knowledge of scientific programming with a scripting-type language. This edition of the book uses Matlab, and a chapter devoted to the basics of scientific programming with Matlab is included. A parallel edition using Python instead of Matlab is also available. Last but not least, each chapter is accompanied by an extensive set of course-tested exercises and solutions.

Download or read book Stochastic Subsurface Hydrology written by L. W. Gelhar and published by Prentice Hall. This book was released on 1993 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes new stochastic subsurface hydrology techniques and results and examines the basic stochastic methods used to treat flow and contaminant transport in naturally heterogeneous permeable earth materials.