Download or read book Tuneable Film Bulk Acoustic Wave Resonators written by Spartak Gevorgian and published by Springer Science & Business Media. This book was released on 2013-02-01 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: To handle many standards and ever increasing bandwidth requirements, large number of filters and switches are used in transceivers of modern wireless communications systems. It makes the cost, performance, form factor, and power consumption of these systems, including cellular phones, critical issues. At present, the fixed frequency filter banks based on Film Bulk Acoustic Resonators (FBAR) are regarded as one of the most promising technologies to address performance -form factor-cost issues. Even though the FBARs improve the overall performances the complexity of these systems remains high.a Attempts are being made to exclude some of the filters by bringing the digital signal processing (including channel selection) as close to the antennas as possible. However handling the increased interference levels is unrealistic for low-cost battery operated radios. Replacing fixed frequency filter banks by one tuneable filter is the most desired and widely considered scenario. As an example, development of the software based cognitive radios is largely hindered by the lack of adequate agile components, first of all tuneable filters. In this sense the electrically switchable and tuneable FBARs are the most promising components to address the complex cost-performance issues in agile microwave transceivers, smart wireless sensor networks etc.Tuneable Film Bulk Acoustic Wave Resonators discusses FBAR need, physics, designs, modelling, fabrication and applications. Tuning of the resonant frequency of the FBARs is considered. Switchable and tuneable FBARs based on electric field induced piezoelectric effect in paraelectric phase ferroelectrics are covered. The resonance of these resonators may be electrically switched on and off and tuned without hysteresis.The book is aimed at microwave and sensor specialists in the industry and graduate students. Readers will learn about principles of operation and possibilities of the switchable and tuneable FBARs, and will be given general guidelines for designing, fabrication and applications of these devices."

Download or read book Micro Electro Mechanical Systems written by Qing-An Huang and published by Springer. This book was released on 2018-05-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook volume aims to provide a comprehensive, self-contained, and authoritative reference in MEMS. It covers the theoretical and practical aspects including but not limited to sensors, actuators, RF MEMS, micro fluids and bio MEMS systems. It is particularly recommended to undergraduates, postgraduates, researchers, scientists, and field experts. This comprehensive summary will provide a solid knowledge background and inspire innovations in this highly interdisciplinary field. The handbook series consists of 5 volumes: Micro/nano fabrication technology, MEMS, Nanomaterial, Nanomedicine and Applications of micro-/nanotechnologies in IT. Experienced researchers and experts are invited to contribute in each of these areas.The series is published under Springer Major Reference works, which allows continuous online update and publication. These features allow newcomers and other readers to keep in touch with the most up-to-date information in micro-/nanotechnologies.It presents an overview of the knowledge base, as well as selected topics and provides comprehensive and authoritative information on the field for researchers, engineers, scientists and graduate students who are involved in different aspects of micro-/nanotechnologies.This publication will provide inspiration for innovative research and application ideas for continued growth of the field.

Download or read book Surface Acoustic Wave Devices and Their Signal Processing Applications written by Colin Campbell and published by Elsevier. This book was released on 2012-12-02 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Acoustic Wave Devices and Their Signal Processing Applications is a textbook that combines experiment and theory in assessing the signal processing applications of surface acoustic wave (SAW) devices. The operating principles of SAW devices are described from a circuit design viewpoint. This book is comprised of 18 chapters and begins with a historical background on surface acoustic waves and a discussion on the merits of SAW devices as well as their applications. The next chapter introduces the reader to the basics of acoustic waves and piezoelectricity, together with the effect of acoustic bulk waves on the performance of SAW filters. The principles of linear phase SAW filter design and equivalent circuit models for a SAW filter are then described. The remaining chapters focus on trade-offs in linear phase SAW filter design; compensation for second-order effects; harmonic SAW delay lines for gigahertz frequencies; and coding techniques using linear SAW transducers. The final chapter highlights Some other significant alternative design techniques and applications for SAW devices. This monograph will be suitable for engineering or physics students as well as engineers, scientists, and technical staff in industry who seek further information on SAW-based circuits, systems, and applications.

Download or read book Surface Acoustic Wave Devices in Telecommunications written by Ken-Ya Hashimoto and published by Springer Science & Business Media. This book was released on 2000-06-21 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface acoustic wave (SAW) devices are widely used in mobile communications, a rapidly evolving market. This book gives an overview on the latest SAW technologies with an emphasis on the design and simulation of devices, such as resonator-based devices employing the SH-type leaky SAW.

Download or read book Modeling and Measurement Methods for Acoustic Waves and for Acoustic Microdevices written by Marco G. Beghi and published by BoD – Books on Demand. This book was released on 2013-08-28 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustics is a mature field which enjoys a never ending youth. New developments are induced by either the search for a better understanding, or by technological innovations. Micro-fabrication techniques introduced a whole new class of microdevices, which exploit acoustic waves for various tasks, and in particular for information processing and for sensing purposes. Performance improvements are achievable by better modelling tools, able to deal with more complex configurations, and by more refined techniques of fabrication and of integration in technological systems, like wireless communications. Several chapters of this book deal with modelling and fabrication techniques for microdevices, including unconventional phenomena and configurations. But this is far from exhausting the research lines in acoustics. Theoretical analyses and modelling techniques are presented, for phenomena ranging from the detection of cracks to the acoustics of the oceans. Measurement methods are also discussed, which probe by acoustic waves the properties of widely different systems.

Download or read book Masters Theses in the Pure and Applied Sciences Accepted by Colleges and Universities of the United States and Canada written by and published by . This book was released on 1996 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanics of Microsystems written by Alberto Corigliano and published by John Wiley & Sons. This book was released on 2018-04-02 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Microsystems Alberto Corigliano, Raffaele Ardito, Claudia Comi, Attilio Frangi, Aldo Ghisi and Stefano Mariani, Politecnico di Milano, Italy A mechanical approach to microsystems, covering fundamental concepts including MEMS design, modelling and reliability Mechanics of Microsystems takes a mechanical approach to microsystems and covers fundamental concepts including MEMS design, modelling and reliability. The book examines the mechanical behaviour of microsystems from a ‘design for reliability’ point of view and includes examples of applications in industry. Mechanics of Microsystems is divided into two main parts. The first part recalls basic knowledge related to the microsystems behaviour and offers an overview on microsystems and fundamental design and modelling tools from a mechanical point of view, together with many practical examples of real microsystems. The second part covers the mechanical characterization of materials at the micro-scale and considers the most important reliability issues (fracture, fatigue, stiction, damping phenomena, etc) which are fundamental to fabricate a real working device. Key features: Provides an overview of MEMS, with special focus on mechanical-based Microsystems and reliability issues. Includes examples of applications in industry. Accompanied by a website hosting supplementary material. The book provides essential reading for researchers and practitioners working with MEMS, as well as graduate students in mechanical, materials and electrical engineering.

Download or read book Chemical and Biochemical Applications written by Pierre Laszlo and published by Elsevier. This book was released on 2012-12-02 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: NMR of Newly Accessible Nuclei, Volume 1: Chemical and Biochemical Applications is a 10-chapter text that explores the properties, advantages, developments, and chemical and biochemical applications of NMR technique. This book describes first the operation of an NMR spectrometer under its two aspects, namely, the instrumental and the computational aspects. The next chapters are devoted to some of the most important pulse sequences. The discussion then shifts to the various factors determining the position of the observed absorption and those responsible for the various relaxation processes. The last chapters deal with the specific applications of NMR, including in cation salvation, calcium-binding proteins, polyelectrolyte systems, halogens, and antibiotic ionophores. This book is of value to inorganic and analytical chemists, and biophysicists.

Download or read book Piezoelectric MEMS Resonators written by Harmeet Bhugra and published by Springer. This book was released on 2017-01-09 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces piezoelectric microelectromechanical (pMEMS) resonators to a broad audience by reviewing design techniques including use of finite element modeling, testing and qualification of resonators, and fabrication and large scale manufacturing techniques to help inspire future research and entrepreneurial activities in pMEMS. The authors discuss the most exciting developments in the area of materials and devices for the making of piezoelectric MEMS resonators, and offer direct examples of the technical challenges that need to be overcome in order to commercialize these types of devices. Some of the topics covered include: Widely-used piezoelectric materials, as well as materials in which there is emerging interest Principle of operation and design approaches for the making of flexural, contour-mode, thickness-mode, and shear-mode piezoelectric resonators, and examples of practical implementation of these devices Large scale manufacturing approaches, with a focus on the practical aspects associated with testing and qualification Examples of commercialization paths for piezoelectric MEMS resonators in the timing and the filter markets ...and more! The authors present industry and academic perspectives, making this book ideal for engineers, graduate students, and researchers.

Download or read book Japanese Journal of Applied Physics written by and published by . This book was released on 2007 with total page 1502 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book RFID Handbook written by Klaus Finkenzeller and published by John Wiley & Sons. This book was released on 2010-11-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third revised edition of the established and trusted RFID Handbook; the most comprehensive introduction to radio frequency identification (RFID) available. This essential new edition contains information on electronic product code (EPC) and the EPC global network, and explains near-field communication (NFC) in depth. It includes revisions on chapters devoted to the physical principles of RFID systems and microprocessors, and supplies up-to-date details on relevant standards and regulations. Taking into account critical modern concerns, this handbook provides the latest information on: the use of RFID in ticketing and electronic passports; the security of RFID systems, explaining attacks on RFID systems and other security matters, such as transponder emulation and cloning, defence using cryptographic methods, and electronic article surveillance; frequency ranges and radio licensing regulations. The text explores schematic circuits of simple transponders and readers, and includes new material on active and passive transponders, ISO/IEC 18000 family, ISO/IEC 15691 and 15692. It also describes the technical limits of RFID systems. A unique resource offering a complete overview of the large and varied world of RFID, Klaus Finkenzeller’s volume is useful for end-users of the technology as well as practitioners in auto ID and IT designers of RFID products. Computer and electronics engineers in security system development, microchip designers, and materials handling specialists benefit from this book, as do automation, industrial and transport engineers. Clear and thorough explanations also make this an excellent introduction to the topic for graduate level students in electronics and industrial engineering design. Klaus Finkenzeller was awarded the Fraunhofer-Smart Card Prize 2008 for the second edition of this publication, which was celebrated for being an outstanding contribution to the smart card field.

Download or read book Materials Integration and Packaging Issues for High frequency Devices written by and published by . This book was released on 2003 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microscale Acoustofluidics written by Thomas Laurell and published by Royal Society of Chemistry. This book was released on 2014-12-08 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manipulation of cells and microparticles within microfluidic systems using external forces is valuable for many microscale analytical and bioanalytical applications. Acoustofluidics is the ultrasound-based external forcing of microparticles with microfluidic systems. It has gained much interest because it allows for the simple label-free separation of microparticles based on their mechanical properties without affecting the microparticles themselves. Microscale Acoustofluidics provides an introduction to the field providing the background to the fundamental physics including chapters on governing equations in microfluidics and perturbation theory and ultrasound resonances, acoustic radiation force on small particles, continuum mechanics for ultrasonic particle manipulation, and piezoelectricity and application to the excitation of acoustic fields for ultrasonic particle manipulation. The book also provides information on the design and characterization of ultrasonic particle manipulation devices as well as applications in acoustic trapping and immunoassays. Written by leading experts in the field, the book will appeal to postgraduate students and researchers interested in microfluidics and lab-on-a-chip applications.

Download or read book Understanding Acoustics written by Steven L. Garrett and published by Springer. This book was released on 2017-02-24 with total page 913 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a unified approach to acoustics and vibration suitable for use in advanced undergraduate and first-year graduate courses on vibration and fluids. The book includes thorough treatment of vibration of harmonic oscillators, coupled oscillators, isotropic elasticity, and waves in solids including the use of resonance techniques for determination of elastic moduli. Drawing on 35 years of experience teaching introductory graduate acoustics at the Naval Postgraduate School and Penn State, the author presents a hydrodynamic approach to the acoustics of sound in fluids that provides a uniform methodology for analysis of lumped-element systems and wave propagation that can incorporate attenuation mechanisms and complex media. This view provides a consistent and reliable approach that can be extended with confidence to more complex fluids and future applications. Understanding Acoustics opens with a mathematical introduction that includes graphing and statistical uncertainty, followed by five chapters on vibration and elastic waves that provide important results and highlight modern applications while introducing analytical techniques that are revisited in the study of waves in fluids covered in Part II. A unified approach to waves in fluids (i.e., liquids and gases) is based on a mastery of the hydrodynamic equations. Part III demonstrates extensions of this view to nonlinear acoustics. Engaging and practical, this book is a must-read for graduate students in acoustics and vibration as well as active researchers interested in a novel approach to the material.

Download or read book Handbook of Cell Biosensors written by Gérald Thouand and published by Springer. This book was released on 2021-10-01 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an interdisciplinary and comprehensive reference covering all aspects of cell biosensors. It is divided into four main sections which are led and organized by numerous international experts. The scope of coverage includes: Fundamentals and genetics for biosensor applications Transducers, Materials and Systems Markets, innovation and education Application of biosensors in business Biosensor research is an exciting hybrid world where biologists, chemists, physicists, engineers and computer engineers come together. This handbook will serve as an invaluable living resource for all researchers in academia and industry working with cell biosensors.

Download or read book Phononic Crystals written by Abdelkrim Khelif and published by Springer. This book was released on 2015-07-28 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth analysis as well as an overview of phononic crystals. This book discusses numerous techniques for the analysis of phononic crystals and covers, among other material, sonic and ultrasonic structures, hypersonic planar structures and their characterization, and novel applications of phononic crystals. This is an ideal book for those working with micro and nanotechnology, MEMS (microelectromechanical systems), and acoustic devices. This book also: Presents an introduction to the fundamentals and properties of phononic crystals Covers simulation techniques for the analysis of phononic crystals Discusses sonic and ultrasonic, hypersonic and planar, and three-dimensional phononic crystal structures Illustrates how phononic crystal structures are being deployed in communication systems and sensing systems

Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.