Download or read book Assessment of Inertial Confinement Fusion Targets written by National Research Council and published by National Academies Press. This book was released on 2013-07-17 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fall of 2010, the Office of the U.S. Department of Energy's (DOE's) Secretary for Science asked for a National Research Council (NRC) committee to investigate the prospects for generating power using inertial confinement fusion (ICF) concepts, acknowledging that a key test of viability for this concept-ignition -could be demonstrated at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) in the relatively near term. The committee was asked to provide an unclassified report. However, DOE indicated that to fully assess this topic, the committee's deliberations would have to be informed by the results of some classified experiments and information, particularly in the area of ICF targets and nonproliferation. Thus, the Panel on the Assessment of Inertial Confinement Fusion Targets ("the panel") was assembled, composed of experts able to access the needed information. The panel was charged with advising the Committee on the Prospects for Inertial Confinement Fusion Energy Systems on these issues, both by internal discussion and by this unclassified report. A Panel on Fusion Target Physics ("the panel") will serve as a technical resource to the Committee on Inertial Confinement Energy Systems ("the Committee") and will prepare a report that describes the R&D challenges to providing suitable targets, on the basis of parameters established and provided to the Panel by the Committee. The Panel on Fusion Target Physics will prepare a report that will assess the current performance of fusion targets associated with various ICF concepts in order to understand: 1. The spectrum output; 2. The illumination geometry; 3. The high-gain geometry; and 4. The robustness of the target design. The panel addressed the potential impacts of the use and development of current concepts for Inertial Fusion Energy on the proliferation of nuclear weapons information and technology, as appropriate. The Panel examined technology options, but does not provide recommendations specific to any currently operating or proposed ICF facility.

Download or read book An Introduction to Inertial Confinement Fusion written by Susanne Pfalzner and published by CRC Press. This book was released on 2006-03-02 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newcomers to the field of inertial confinement fusion (ICF) often have difficulty establishing a clear picture of the overall field. The reason for this is because, while there are many books devoted to special topics within the field, there is none that provides an overview of the field as a whole. An Introduction to Inertial Confinement Fusion fi

Download or read book The Physics of Inertial Fusion written by Stefano Atzeni and published by OUP Oxford. This book was released on 2004-06-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is on inertial confinement fusion, an alternative way to produce electrical power from hydrogen fuel by using powerful lasers or particle beams. It involves the compression of tiny amounts (micrograms) of fuel to thousand times solid density and pressures otherwise existing only in the centre of stars. Thanks to advances in laser technology, it is now possible to produce such extreme states of matter in the laboratory. Recent developments have boosted laser intensities again with new possibilities for laser particle accelerators, laser nuclear physics, and fast ignition of fusion targets. This is a reference book for those working on beam plasma physics, be it in the context of fundamental research or applications to fusion energy or novel ultra-bright laser sources. The book combines quite different areas of physics: beam target interaction, dense plasmas, hydrodynamic implosion and instabilities, radiative energy transfer as well as fusion reactions. Particular attention is given to simple and useful modelling, including dimensional analysis and similarity solutions. Both authors have worked in this field for more than 20 years. They want to address in particular those teaching this topic to students and all those interested in understanding the technical basis.

Download or read book The Release of Thermonuclear Energy by Inertial Confinement written by Friedwardt Winterberg and published by World Scientific. This book was released on 2010 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive book which describes the three essential parts of what is known as "Inertial Confinement Fusion": the way thermonuclear burn takes place in non-magnetized, magnetized and fusion-fission hybrid assemblies; the pulse power ignition technology (nuclear, electrical, optical and chemical); and the applications of inertial confinement fusion technology for peaceful nuclear energy on Earth and in space. An integrated single text of such extensive technical width is a rare find, and younger generations of nuclear engineers any physicists will appreciate this book as a companion to their traditional textbooks.

Download or read book Controlled Thermonuclear Fusion written by Jean Louis Bobin and published by World Scientific Publishing Company. This book was released on 2014-03-12 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a presentation of the basic principles and main achievements in the field of nuclear fusion. It encompasses both magnetic and inertial confinements plus a few exotic mechanisms for nuclear fusion. The state-of-the-art regarding thermonuclear reactions, hot plasmas, tokamaks, laser-driven compression and future reactors is given.

Download or read book Laser Thermonuclear Fusion Research Review 1984 2008 on Generation of Suprathermal Particles Laser Radiation Harmonics and Quasistationary Magnetic Fields The Stefan University Graduate Courses ISSN 1543 558X written by V.Alexander STEFAN and published by Stefan University Press. This book was released on with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Renewable Energies and CO2 written by Ricardo Guerrero-Lemus and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing up-to-date numerical data across a range of topics related to renewable energy technologies, Renewable Energies and CO2 offers a one-stop source of key information to engineers, economists and all other professionals working in the energy and climate change sectors. The most relevant up-to-date numerical data are exposed in 201 tables and graphs, integrated in terms of units and methodology, and covering topics such as energy system capacities and lifetimes, production costs, energy payback ratios, carbon emissions, external costs, patents and literature statistics. The data are first presented and then analyzed to project potential future grid, heat and fuel parity scenarios, as well as future technology tendencies in different energy technological areas. Innovative highlights and descriptions of preproduction energy systems and components from the past four years have been gathered from selected journals and international energy departments from G20 countries. As the field develops, readers are invited and encouraged to contact the authors for feedback and comments. The ongoing data collection and analysis will be used – after proper acknowledgment of contributors - to develop new editions. In this way, it is ensured that Renewable Energies and CO2 will remain an up-to-date resource for all those working with or involved in renewable energy, climate change, energy storage, carbon capture and smart grids.

Download or read book Review of the Department of Energy s Inertial Confinement Fusion Program written by National Research Council and published by National Academies Press. This book was released on 1997-04-24 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Assessment of the Prospects for Inertial Fusion Energy written by National Research Council and published by National Academies Press. This book was released on 2013-07-05 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential for using fusion energy to produce commercial electric power was first explored in the 1950s. Harnessing fusion energy offers the prospect of a nearly carbon-free energy source with a virtually unlimited supply of fuel. Unlike nuclear fission plants, appropriately designed fusion power plants would not produce the large amounts of high-level nuclear waste that requires long-term disposal. Due to these prospects, many nations have initiated research and development (R&D) programs aimed at developing fusion as an energy source. Two R&D approaches are being explored: magnetic fusion energy (MFE) and inertial fusion energy (IFE). An Assessment of the Prospects for Inertial Fusion Energy describes and assesses the current status of IFE research in the United States; compares the various technical approaches to IFE; and identifies the scientific and engineering challenges associated with developing inertial confinement fusion (ICF) in particular as an energy source. It also provides guidance on an R&D roadmap at the conceptual level for a national program focusing on the design and construction of an inertial fusion energy demonstration plant.

Download or read book Laser Matter Interaction for Radiation and Energy written by Hitendra K. Malik and published by CRC Press. This book was released on 2021-03-14 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interaction of high-power lasers with matter can generate Terahertz radiations that efficiently contribute to THz Time-Domain Spectroscopy and also would replace X-rays in medical and security applications. When a short intense laser pulse ionizes a gas, it may produce new frequencies even in VUV to XUV domain. The duration of XUV pulses can be confined down to the isolated attosecond pulse levels, required to study the electronic re-arrangement and ultrafast processes. Another important aspect of laser-matter interaction is the laser thermonuclear fusion control where accelerated particles also find an efficient use. This book provides comprehensive coverage of the most essential topics, including Electromagnetic waves and lasers THz radiation using semiconducting materials / nanostructures / gases / plasmas Surface plasmon resonance THz radiation detection Particle acceleration technologies X-ray lasers High harmonics and attosecond lasers Laser based techniques of thermonuclear fusion Controlled fusion devices including NIF and ITER The book comprises of 11 chapters and every chapter starts with a lucid introduction to the main topic. Then sub-topics are sedulously discussed keeping in mind their basics, methodology, state-of-the-art and future perspective that will prove to be salutary for readers. High quality solved examples are appended to the chapters for their deep understanding and relevant applications. In view of the nature of the topics and their level of discussion, this book is expected to have pre-eminent potential for researchers along with postgraduate and undergraduate students all over the world.

Download or read book The Physics Of Laser Plasma Interactions written by William Kruer and published by CRC Press. This book was released on 2019-08-20 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the physics of laser plasma interactions and presents a complementary and very useful numerical model of plasmas. It describes the linear theory of light wave propagation in plasmas, including linear mode conversion into plasma waves and collisional damping.

Download or read book Plasma Scattering of Electromagnetic Radiation written by John Sheffield and published by Academic Press. This book was released on 2010-11-25 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents one of the most powerful methods of plasma diagnosis in exquisite detail, to guide researchers in the theory and measurement techniques of light scattering in plasmas. Light scattering in plasmas is essential in the research and development of fusion energy, environmental solutions, and electronics.Referred to as the "Bible" by researchers, the work encompasses fusion and industrial applications essential in plasma research. It is the only comprehensive resource specific to the plasma scattering technique. It provides a wide-range of experimental examples and discussion of their principles with worked examples to assist researchers in applying the theory. - Computing techniques for solving basic equations helps researchers compare data to the actual experiment - New material on advances on the experimental side, such as the application of high density plasmas of inertial fusion - Worked out examples of the scattering technique for easier comprehension of theory

Download or read book High Power Laser Plasma Interaction written by C. S. Liu and published by Cambridge University Press. This book was released on 2019-05-23 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of high-power laser-plasma interaction has grown in the last few decades, with applications ranging from laser-driven fusion and laser acceleration of charged particles to laser ablation of materials. This comprehensive text covers fundamental concepts including electromagnetics and electrostatic waves, parameter instabilities, laser driven fusion,charged particle acceleration and gamma rays. Two important techniques of laser proton interactions including target normal sheath acceleration (TNSA) and radiation pressure acceleration (RPA) are discussed in detail, along with their applications in the field of medicine. An analytical framework is developed for laser beat-wave and wakefield excitation of plasma waves and subsequent acceleration of electrons. The book covers parametric oscillator model and studies the coupling of laser light with collective modes.

Download or read book The American Lab written by C. Bruce Tarter and published by JHU Press. This book was released on 2018-08-01 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Behind the scenes of the Lawrence Livermore National Laboratory, the quintessential American lab. Nobel laureate Ernest O. Lawrence and renowned physicist Edward Teller founded the Lawrence Livermore National Laboratory in 1952. A new ideas incubator, the Lab was at the heart of nuclear testing and the development of supercomputers, lasers, and other major technological innovations of the second half of the twentieth century. Many of its leaders became prominent figures in the technical and defense establishments, and by the end of the 1960s, Livermore was the peer of Los Alamos National Lab, a relationship that continues today. In The American Lab, former Livermore director C. Bruce Tarter offers unparalleled access to the inner workings of the Lab. Touching on Cold War nuclear science and the technological shift that occurred after the fall of the Berlin Wall, he traces the Lab’s evolution from its founding under University of California management through its transfer to private oversight. Along the way, he highlights important episodes in that journey, from the invention of Polaris, the first submarine-launched ballistic missile, to the Lab’s controversial role in the Star Wars program. He also describes Livermore’s significant responsibilities in stockpile stewardship, the program that ensures the safety and reliability of the US nuclear arsenal. The book portrays the lab’s extensive work on thermonuclear fusion, a potential source of unlimited energy; describes the development of the world’s largest laser fusion installation, the National Ignition Facility; and examines a number of smaller projects, such as the Lab’s participation in founding the Human Genome Project. Finally, it traces the relationship of the Lab to its federal sponsor, the Department of Energy, as it evolved from partnership to compliance with orders, a shift that affected all of the national laboratories. Drawing on oral histories, internal laboratory documents, and the author’s personal experiences from more than fifty years as a Lab employee, The American Lab is an illuminating history of the Lab and its revolutionary work.

Download or read book Plasmas and Laser Light written by Thomas Peter Hughes and published by John Wiley & Sons. This book was released on 1975 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Magnetic Fusion Technology written by Thomas J. Dolan and published by Springer Science & Business Media. This book was released on 2014-02-10 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: • magnet systems, • plasma heating systems, • control systems, • energy conversion systems, • advanced materials development, • vacuum systems, • cryogenic systems, • plasma diagnostics, • safety systems, and • power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.

Download or read book Nuclear Fusion by Inertial Confinement written by Guillermo Velarde and published by CRC Press. This book was released on 1992-12-15 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Fusion by Inertial Confinement provides a comprehensive analysis of directly driven inertial confinement fusion. All important aspects of the process are covered, including scientific considerations that support the concept, lasers and particle beams as drivers, target fabrication, analytical and numerical calculations, and materials and engineering considerations. Authors from Australia, Germany, Italy, Japan, Russia, Spain, and the U.S. have contributed to the volume, making it an internationally significant work for all scientists working in the Inertial Confinement Fusion (ICF) field, as well as for graduate students in engineering and physics with interest in ICF.