Download or read book Laser Micro nano Scale Processing of Glass and Silicon written by Senthil Prakash Theppakuttai Kom and published by . This book was released on 2006 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revolutionary progress in semiconductor, communication, and information industries based on electronic and photonic technologies demands for the development and enhancement of new laser processes to support micro and nanotechnologies. This dissertation is aimed at exploring the use of lasers for micro and nano scale processing of glass and silicon, the most commonly used materials in the IC industry. The objective of the dissertation is two fold: (a) use lasers for locally micro bonding glass and silicon wafers, and (b) use lasers for nanopatterning glass and silicon substrates by circumventing the diffraction limit of light.

Download or read book Micro and Nanoscale Laser Processing of Hard Brittle Materials written by Jiwang Yan and published by Elsevier. This book was released on 2019-11-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro and Nanoscale Laser Processing of Hard Brittle Materials examines general laser-material interactions within this type of material, focusing on the nanoprocessing technologies that these phenomena have given rise to. Sections cover laser machining, healing, recovery, sintering, surface modification, texturing and microstructuring. These technologies all benefit from the characteristics of laser processing, its highly localized heating ability, and its well-defined optical properties. The book also describes frontier applications of the developed technologies, thus further emphasizing the possibility of processing hard brittle materials into complex structures with functional surfaces at both the micro and nanoscale. Provides readers with a solid understanding of laser-material interactions Helps readers choose suitable laser parameters for processing hard brittle materials Demonstrates how micro and nanoscale laser processing can be used to machine brittle materials without fracture

Download or read book Ultrafast Laser Processing written by Koji Sugioka and published by CRC Press. This book was released on 2013-06-24 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades, the rapid development of ultrafast lasers, such as femtosecond lasers and picosecond lasers, has opened up new avenues for material processing due to their unique features such as ultrashort pulse width and extremely high peak intensity. These techniques have become a common tool for micro- and nanoprocessing of a variety

Download or read book Laser Micro Nano Manufacturing and 3D Microprinting written by Anming Hu and published by Springer Nature. This book was released on 2020-11-28 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest advances in laser techniques for micro-nano-manufacturing and an in-depth analysis of applications, such as 3D printing and nanojoining. Lasers have gained increasing significance as a precise tool for advanced manufacturing. Written by world leading scientists, the first part of the book presents the fundamentals of laser interaction with materials at the micro- and nanoscale, including multiphoton excitation and nonthermal melting, and allows readers to better understand advanced processing. In the second part, the authors focus on various advanced fabrications, such as laser peening, surface nanoengineering, and plasmonic heating. Finally, case studies are devoted to special applications, such as 3D printing, microfluidics devices, energy devices, and plasmonic and photonic waveguides. This book integrates both theoretical and experimental analysis. The combination of tutorial chapters and concentrated case studies will be critically attractive to undergraduate and graduate students, researchers, and engineers in the relevant fields. Readers will grasp the full picture of the application of laser for micro-nanomanufacturing and 3D printing.

Download or read book Laser Micro and Nano scale Processing written by Ahmed Issa (professor of mechatronics engineering) and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of chapters written by experienced researchers in the fields of laser micro- and nano-scale processing for both surface and bulk processing covering surface modification processes, laser material interaction regimes, laser system construction for micro- and nanomachining applications, and the thermal mathematical modelling of laser processes. As an important reference for researchers in the field of micro- and nano-scale processing, this book aims to assist researchers and postgraduates in becoming familiar with the principles, capabilities and potential of the laser processing of materials quickly. Offering a one-stop reference, this book provides an understanding of the physical phenomena, process principles, latest achievements, and applications from the key researchers and research groups that focus on precision micro- and nano-scale laser processing. Part of IOP Series in Coherent Sources, Quantum Fundamentals, and Applications.

Download or read book Pulsed Laser Processing of Electronic Materials in Micro nanoscale written by David Jen Hwang and published by . This book was released on 2005 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Laser and Plasma in Micro and Nano scale Materials Processing and Diagnostics written by European Material Research Society and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Laser Micromachining written by Ahmed Issa and published by Coherent Sources and Applicati. This book was released on 2021-08-02 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of chapters written by experienced researchers in the fields of laser micro- and nano-scale processing for both surface and bulk processing covering surface modification processes, laser material interaction regimes, laser system construction for micro- and nanomachining applications, and the thermal mathematical modelling of laser processes. As an important reference for researchers in the field of micro- and nano-scale processing, this book aims to assist researchers and postgraduates in becoming familiar with the principles, capabilities and potential of the laser processing of materials quickly. Offering a one-stop reference, this book provides an understanding of the physical phenomena, process principles, latest achievements, and applications from the key researchers and research groups that focus on precision micro- and nano-scale laser processing. Key Features Provides the fundamental processes and applications of laser micromachining. Includes simplified descriptions of the physical principles underlying micromachining. Details the physical phenomena, process principles, and latest achievements. Descriptions, illustrations, and citations will be provided throughout to enhance the reader experience. Mathematical modeling, simulation packages, and experimental procedures will be explained.

Download or read book Handbook of Laser Micro and Nano Engineering written by KOJI SUGIOKA. and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.

Download or read book Laser Growth and Processing of Photonic Devices written by Nikolaos A Vainos and published by Elsevier. This book was released on 2012-07-10 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lasers in the processing of electronic and photonic material is becoming increasingly widespread, with technological advances reducing costs and increasing both the quality and range of novel devices which can be produced. Laser growth and processing of photonic devices is the first book to review this increasingly important field. Part one investigates laser-induced growth of materials and surface structures, with pulsed laser deposition techniques, the formation of nanocones and the fabrication of periodic photonic microstructures explored in detail. Laser-induced three-dimensional micro- and nano-structuring are the focus of part two. Exploration of multiphoton lithography, processing and fabrication is followed by consideration of laser-based micro- and nano-fabrication, laser-induced soft matter organization and microstructuring, and laser-assisted polymer joining methods. The book concludes in part three with an investigation into laser fabrication and manipulation of photonic structures and devices. Laser seeding and thermal processing of glass with nanoscale resolution, laser-induced refractive index manipulation, and the thermal writing of photonic devices in glass and polymers are all considered. With its distinguished editor and international team of expert contributors, Laser growth and processing of photonic devices is an essential tool for all materials scientists, engineers and researchers in the microelectronics industry. The first book to review the increasingly important field of laser growth and processing of photonic devices Investigates laser-induced growth of materials and surface structures, pulsed laser deposition techniques, the formation of nanocones and the fabrication of periodic photonic microstructures Examines laser-induced three-dimensional micro- and nano-structuring and concludes with an investigation into laser fabrication and manipulation of photonic structures and devices

Download or read book Laser Micro nano Machining Based on Spatial Temporal and Spectral Control of Light matter Interaction written by Xiaoming Yu and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers have been widely used as a manufacturing tool for material processing, such as drilling, cutting, welding and surface texturing. Compared to traditional manufacturing methods, laser-based material processing is high precision, can treat a wide range of materials, and has no tool wear. However, demanding manufacturing processes emerging from the needs of nano and 3D fabrication require the development of laser processing strategies that can address critical issues such as machining resolution, processing speed and product quality. This dissertation concerns the development of novel laser processing strategies based on spatial, temporal and spectral control of light-matter interaction. In the spatial domain, beam shaping is employed in ultrafast laser micro-processing. Zero-order Bessel beam, generated by an axicon, is used for selective removal of the back contact layer of thin film solar cells. Bessel beam's propagation-invariance property gives rise to an extension of focal range by orders of magnitude compared to Gaussian beam, greatly increasing process tolerance to surface unevenness and positioning error. Together with the axicon, a spatial light modulator is subsequently used to modify the phase of laser beam and generate superpositions of high-order Bessel beam with high energy efficiency. With the superposed beam, processing speed can be increased significantly, and collateral damage resulting from the ring structures in the zero-order Bessel beam can be greatly suppressed. In the temporal domain, it is demonstrated that ionization in dielectric materials can be controlled with a pair of ultraviolet and infrared pulses. With the assistance of the long-wavelength infrared pulse, nano-scale features are achieved using only a small fraction of threshold energy for the short-wavelength pulse. Computer simulation based on the rate equation model is conducted and found to be in good agreement with experimental results. This study paves the way for future adoption of short-wavelength laser sources, for example in the extreme ultraviolet range, for direct laser nano-fabrication with below-threshold pulse energy. In the spectral domain, a short-wavelength infrared laser is used to generate modification in the bulk of silicon wafers, in an attempt to develop 3D fabrication capabilities in semiconductors. Issues such as spherical aberration correction and examination procedure are addressed. Permanent modification is generated inside silicon by tightly focusing and continuously scanning the laser beam inside the samples, without introducing surface damage. The effect of laser pulse energy and polarization is also investigated. These results demonstrate the potential of controlling laser processing in multiple dimensions for manufacturing purposes, and point to a future when laser can be used as naturally and efficiently as mechanical tools used today, but is targeted at more challenging problems.

Download or read book Femtosecond Laser Micromachining written by Roberto Osellame and published by Springer Science & Business Media. This book was released on 2012-03-05 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Femtosecond laser micromachining of transparent material is a powerful and versatile technology. In fact, it can be applied to several materials. It is a maskless technology that allows rapid device prototyping, has intrinsic three-dimensional capabilities and can produce both photonic and microfluidic devices. For these reasons it is ideally suited for the fabrication of complex microsystems with unprecedented functionalities. The book is mainly focused on micromachining of transparent materials which, due to the nonlinear absorption mechanism of ultrashort pulses, allows unique three-dimensional capabilities and can be exploited for the fabrication of complex microsystems with unprecedented functionalities.This book presents an overview of the state of the art of this rapidly emerging topic with contributions from leading experts in the field, ranging from principles of nonlinear material modification to fabrication techniques and applications to photonics and optofluidics.

Download or read book Microfabrication and Nanomanufacturing written by Mark J. Jackson and published by CRC Press. This book was released on 2005-11-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology, seen as the next leap forward in the industrial revolution, requires that manufacturers develop processes that revolutionize the way small products are made. Microfabrication and Nanomanufacturing focuses on the technology of fabrication and manufacturing of engineering materials at these levels. The book provides an overview of techniques used in the semiconductor industry. It also discusses scaling and manufacturing processes operating at the nanoscale for non-semiconductor applications; the construction of nanoscale components using established lithographic techniques; bulk and surface micromachining techniques used for etching, machining, and molding procedures; and manufacturing techniques such as injection molding and hot embossing. This authoritative compilation describes non-traditional micro and nanoscale processing that uses a newly developed technique called pulsed water jet machining as well as the efficient removal of materials using optical energy. Additional chapters focus on the development of nanoscale processes for producing products other than semiconductors; the use of abrasive particles embedded in porous tools; and the deposition and application of nanocrystalline diamond. Economic factors are also presented and concern the promotion and commercialization of micro and nanoscale products and how demand will eventually drive the market.

Download or read book Transport in Laser Microfabrication written by Costas P. Grigoropoulos and published by Cambridge University Press. This book was released on 2009-07-30 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides researchers and practitioners with the technical background to understand transport phenomena in laser microfabrication applications.

Download or read book Hybrid Micromachining and Microfabrication Technologies written by Sandip Kunar and published by John Wiley & Sons. This book was released on 2023-05-04 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: HYBRID MICROMACHINING and MICROFABRICATION TECHNOLOGIES The book aims to provide a thorough understanding of numerous advanced hybrid micromachining and microfabrication techniques as well as future directions, providing researchers and engineers who work in hybrid micromachining with a much-appreciated orientation. The book is dedicated to advanced hybrid micromachining and microfabrication technologies by detailing principals, techniques, processes, conditions, research advances, research challenges, and opportunities for various types of advanced hybrid micromachining and microfabrication. It discusses the mechanisms of material removal supported by experimental validation. Constructional features of hybrid micromachining setup suitable for industrial micromachining applications are explained. Separate chapters are devoted to different advanced hybrid micromachining and microfabrication to design and development of micro-tools, which is one of the most vital components in advanced hybrid micromachining, and which can also be used for various micro and nano applications. Power supply, and other major factors which influence advanced hybrid micromachining processes, are covered and research findings concerning the improvement of machining accuracy and efficiency are reported.

Download or read book Laser Processing and Chemistry written by Dieter Bäuerle and published by Springer Science & Business Media. This book was released on 2011-09-02 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Processing and Chemistry gives an overview of the fundamentals and applications of laser-matter interactions, in particular with regard to laser material processing. Special attention is given to laser-induced physical and chemical processes at gas-solid, liquid-solid, and solid-solid interfaces. Starting with the background physics, the book proceeds to examine applications of laser techniques in micro-machining, and the patterning, coating, and modification of material surfaces. This fourth edition has been revised and enlarged to cover new topics such as 3D microfabrication, advances in nanotechnology, ultrafast laser technology and laser chemical processing (LCP). Graduate students, physicists, chemists, engineers, and manufacturers alike will find this book an invaluable reference work on laser processing.

Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources