Download or read book Laser induced Incandescence and Elastic scattering Measurements of Particulate matter Volume Fraction Changes During Passage Through a Dilution Tunnel written by and published by . This book was released on 2000 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern diesel engines produce far less mass of particulate matter than their predecessors, but this advance has been achieved at the expense of a significant increase in the number of sub-micron sized particles. This change in soot morphology has created the need for new instrumentation capable of measuring small volumes and sizes of particulate matter in a reasonable period of time, and preferably in real-time. Laser-induced incandescence and laser elastic scattering are complementary techniques suitable for this task. Optical measurements are presented for a diesel engine exhaust and compared with measurements performed using a scanning mobility particle sizer. This study investigates the effects of exhaust dilution and temperature control of the sampling system. It is also shown that laser-induced vaporization of low temperature volatile material is a potentially valuable technique for measuring the volatile component of exhaust particulate matter.
Download or read book Progress Report for Combustion and Emission Control for Advanced CIDI Engines written by and published by DIANE Publishing. This book was released on with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Induced Incandescence Detection Issues written by and published by . This book was released on 1996 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization and Demonstrations of Laser Induced Incandescence in Both Normal and Low Gravity written by and published by . This book was released on 1997 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of Laser induced Incandescence and Soot Vaporization Using Time Resolved Light Scattering in a Propane Diffusion Flame written by Gregory David Yoder and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: ABSTRACT: Laser-induced incandescence is a technique that uses a pulsed laser beam to heat soot particles up to levels far above the background, causing them to emit radiation as essentially blackbodies, which can then be related to the total soot volume using suitable calibration schemes. However, the temperature reached by the laser-heated particles may cause the particles to begin to vaporize, thereby changing the parameter of interest, namely the total soot volume. The primary goal of this thesis is to investigate the particle vaporization due to LII using time-resolved laser light scattering. Based on the experimental measurements in a sooting propane diffusion flame, significant particle vaporization was found to occur on the time scale of the LII laser pulse. A model was developed to describe the particle temperature and volume as the particles are heated up and vaporized by the LII laser and as the particles subsequently cooled. This heat transfer model uses a fundamental energy balance along with the Planck distribution to model the LII signal as a function of time, and was then used to estimate the influence of particle vaporization on the time-resolved LII signal.
Download or read book Development of a Laser Induced Incandescence System written by Trevor H. Kempthorne and published by . This book was released on 2010 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to accurately measure solid particulate levels in various applications ranging from engines to laboratory flames has become very important in the past few decades. A new approach to measuring soot levels called laser-induced incandescence was investigated. An apparatus was designed and built in order to measure soot levels in an atmospheric laminar diffusion flame with the intent of conducting proof-of-concept measurements. The apparatus utilized highly focussed optics while collecting time-resolved data using fast PMTs which allowed measurement of both time and spatial domains. Although noise and other technical problems proved to be a concern, measurements with reasonable agreement with published results for temperature (2800 K) and the primary particle soot size (6.3 +/- 2.5 nm) were achieved within the flame. Noise issues with the apparatus prevented accurate soot volume fraction measurements from being obtained. Numerous suggestions have been made as to how to improve the experiment for future use, potentially in a high pressure environment.
Download or read book Different Particle Size Information Obtained from Static and Dynamic Laser Light Scattering written by Yong Sun and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Static light scattering (SLS) and dynamic light scattering (DLS) techniques are used to measure characteristics of particles in dispersion. SLS measures the dependence of the average scattered intensity I, on the scattering angle and is sensitive to spatial variations in the dielectric constant E. DLS measures the time dependence of the scattered light. One fundamental application of light scattering techniques is the accurate measurement of the size distribution of particles in dispersion. Detailed experimental investigation of SLS and DLS has been attempted in this work, with experimental work based on dilute water dispersions of two different spherical particles, polystyrene latexes and poly(N-isopropylacrylamide) (PNIPAM) microgels. Size information is obtained from SLS measurements in the form of a particle size distribution G (R,) where R, is the static radius. Size information is obtained from DLS measurements in the form of a decay rate distribution G (I?) which depends on the decay rate I?. Although both SLS and DLS can be used to obtain size information from the scattered light, the information obtained using SLS and DLS is different. For the three polystyrene latex sphere samples studied in this thesis, the mean static radii obtained are consistent with that of the mean radii provided by the supplier. For all three samples, the apparent hydrodynamic radius is larger than the mean static radius by about 12%. For PNIPAM microgel spheres, the apparent hydrodynamic radius is also larger than the mean static radius. The size of the PNIPAM microgel particles is extremely temperature sensitive; the radius decreases by a factor of three as the temperature is raised from 15OC to 50?? Both the hydrodynamic and static radii show this behavior. The effect of the chemical crosslinker (N, N'-methylenebisacrylamide) content on the temperature sensitivity of the PNIPAM microgels and the temperature dependence of the ratio of the apparent hydrodynamic radius to the mean static radius are also discussed.
Download or read book Measurement of Suspended Particles by Quasi elastic Light Scattering written by Barton E. Dahneke and published by John Wiley & Sons. This book was released on 1983 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerosol Science written by Ian Colbeck and published by John Wiley & Sons. This book was released on 2014-02-03 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: AEROSOL SCIENCE TECHNOLOGY AND APPLICATIONS Aerosols influence many areas of our daily life. They are at the core of environmental problems such as global warming, photochemical smog and poor air quality. They can also have diverse effects on human health, where exposure occurs in both outdoor and indoor environments. However, aerosols can have beneficial effects too; the delivery of drugs to the lungs, the delivery of fuels for combustion and the production of nanomaterials all rely on aerosols. Advances in particle measurement technologies have made it possible to take advantage of rapid changes in both particle size and concentration. Likewise, aerosols can now be produced in a controlled fashion. Reviewing many technological applications together with the current scientific status of aerosol modelling and measurements, this book includes: Satellite aerosol remote sensing The effects of aerosols on climate change Air pollution and health Pharmaceutical aerosols and pulmonary drug delivery Bioaerosols and hospital infections Particle emissions from vehicles The safety of emerging nanomaterials Radioactive aerosols: tracers of atmospheric processes With the importance of this topic brought to the public's attention after the eruption of the Icelandic volcano Eyjafjallajökull, this book provides a timely, concise and accessible overview of the many facets of aerosol science.
Download or read book Soot Formation in Combustion written by Henning Bockhorn and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soot Formation in Combustion represents an up-to-date overview. The contributions trace back to the 1991 Heidelberg symposium entitled "Mechanism and Models of Soot Formation" and have all been reedited by Prof. Bockhorn in close contact with the original authors. The book gives an easy introduction to the field for newcomers, and provides detailed treatments for the specialists. The following list of contents illustrates the topics under review:
Download or read book Diesel Emissions and Their Control 2nd Edition written by W. Addy Majewski and published by SAE International. This book was released on 2023-12-20 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers, applied scientists, students, and individuals working to reduceemissions and advance diesel engine technology will find the secondedition of Diesel Emissions and Their Control to be an indispensablereference. Whether readers are at the outset of their learning journey orseeking to deepen their expertise, this comprehensive reference bookcaters to a wide audience.In this substantial update to the 2006 classic, the authors have expandedthe coverage of the latest emission technologies. With the industryevolving rapidly, the book ensures that readers are well-informed aboutthe most recent advances in commercial diesel engines, providing acompetitive edge in their respective fields. The second edition has alsostreamlined the content to focus on the most promising technologies.This book is rooted in the wealth of information available on DieselNet.com, where the “Technology Guide” papers offer in-depth insights. Eachchapter includes links to relevant online materials, granting readers accessto even more expertise and knowledge.The second edition is organized into six parts, providing a structuredjourney through every aspect of diesel engines and emissions control: Part I: A foundational exploration of the diesel engine, combustion, andessential subsystems. Part II: An in-depth look at emission characterization, health andenvironmental impacts, testing methods, and global regulations. Part III: A comprehensive overview of diesel fuels, covering petroleumdiesel, alternative fuels, and engine lubricants. Part IV: An exploration of engine efficiency and emission controltechnologies, from exhaust gas recirculation to engine control. Part V: The latest developments in diesel exhaust aftertreatment,encompassing catalyst technologies and particulate filters. Part VI: A historical journey through the evolution of dieselengine technology, with a focus on heavy-duty engines in the NorthAmerican market. (ISBN 9781468605693, ISBN 9781468605709, ISBN 9781468605716, DOI: 10.4271/9781468605709)
Download or read book Remote Compositional Analysis written by Janice L. Bishop and published by Cambridge University Press. This book was released on 2019-11-28 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive overview of the spectroscopic, mineralogical, and geochemical techniques used in planetary remote sensing.
Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.
Download or read book Surface and Thin Film Analysis written by Gernot Friedbacher and published by Wiley-VCH. This book was released on 2011-06-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surveying and comparing all techniques relevant for practical applications in surface and thin film analysis, this second edition of a bestseller is a vital guide to this hot topic in nano- and surface technology. This new book has been revised and updated and is divided into four parts - electron, ion, and photon detection, as well as scanning probe microscopy. New chapters have been added to cover such techniques as SNOM, FIM, atom probe (AP),and sum frequency generation (SFG). Appendices with a summary and comparison of techniques and a list of equipment suppliers make this book a rapid reference for materials scientists, analytical chemists, and those working in the biotechnological industry. From a Review of the First Edition (edited by Bubert and Jenett) "... a useful resource..." (Journal of the American Chemical Society)
Download or read book Aerosol Science and Technology written by David S. Ensor and published by RTI Press. This book was released on 2011-10-06 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerosol Science and Technology: History and Reviews captures an exciting slice of history in the evolution of aerosol science. It presents in-depth biographies of four leading international aerosol researchers and highlights pivotal research institutions in New York, Minnesota, and Austria. One collection of chapters reflects on the legacy of the Pasadena smog experiment, while another presents a fascinating overview of military applications and nuclear aerosols. Finally, prominent researchers offer detailed reviews of aerosol measurement, processes, experiments, and technology that changed the face of aerosol science. This volume is the third in a series and is supported by the American Association for Aerosol Research (AAAR) History Working Group, whose goal is to produce archival books from its symposiums on the history of aerosol science to ensure a lasting record. It is based on papers presented at the Third Aerosol History Symposium on September 8 and 9, 2006, in St. Paul, Minnesota, USA.
Download or read book Volcanoes written by John P. Lockwood and published by John Wiley & Sons. This book was released on 2013-04-26 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volcanoes are essential elements in the delicate global balance of elemental forces that govern both the dynamic evolution of the Earth and the nature of Life itself. Without volcanic activity, life as we know it would not exist on our planet. Although beautiful to behold, volcanoes are also potentially destructive, and understanding their nature is critical to prevent major loss of life in the future. Richly illustrated with over 300 original color photographs and diagrams the book is written in an informal manner, with minimum use of jargon, and relies heavily on first-person, eye-witness accounts of eruptive activity at both "red" (effusive) and "grey" (explosive) volcanoes to illustrate the full spectrum of volcanic processes and their products. Decades of teaching in university classrooms and fieldwork on active volcanoes throughout the world have provided the authors with unique experiences that they have distilled into a highly readable textbook of lasting value. Questions for Thought, Study, and Discussion, Suggestions for Further Reading, and a comprehensive list of source references make this work a major resource for further study of volcanology. Volcanoes maintains three core foci: Global perspectives explain volcanoes in terms of their tectonic positions on Earth and their roles in earth history Environmental perspectives describe the essential role of volcanism in the moderation of terrestrial climate and atmosphere Humanitarian perspectives discuss the major influences of volcanoes on human societies. This latter is especially important as resource scarcities and environmental issues loom over our world, and as increasing numbers of people are threatened by volcanic hazards Readership Volcanologists, advanced undergraduate, and graduate students in earth science and related degree courses, and volcano enthusiasts worldwide. A companion website is also available for this title at www.wiley.com/go/lockwood/volcanoes
Download or read book Automotive Exhaust Emissions and Energy Recovery written by Apostolos Pesiridis and published by Nova Science Pub Incorporated. This book was released on 2014-01-01 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concerns for fuel economy and reduced emissions have turned the attention of automotive internal combustion engine manufacturers to the exhaust system and towards technological system development to account for the significant levels of potential energy that can be recovered. The present volume on Automotive Exhaust Emissions and Energy Recovery for both gasoline and diesel engines is therefore both timely and appropriate. Whereas diesel engines have been predominantly turbocharged, only a relatively small percentage of gasoline engines are similarly equipped, which has led to significant efforts by engine manufacturers in recent years to downsize and down-speed these engines. On the other hand, the relative focus in diesel engine development in terms of emissions and exhaust energy recovery has shifted toward devices other than the turbocharger for enhanced energy recovery and emissions control technologies in order to allow the diesel engines of the future to keep up with the dual-demand for very low emissions and increasing levels of fuel economy. The book focuses on the exhaust system and the technologies and methods used to reduce emissions and increase fuel economy by capitalising on the exhaust gas energy availability (either in the form of gas kinetic energy or as waste heat extracted from the exhaust gas). It is projected that in the short to medium term, advances in exhaust emissions and energy recovery technologies will lead the way in internal combustion engine development and pave the way towards increasing levels of engine hybridisation until fully electric vehicle technology can claim a level of maturity and corresponding market shares to turn the bulk of this focus away from the internal combustion engine. This book is aimed at engine research professionals in the industry and academia, but also towards students of powertrain engineering. The collection of articles in this book reviews the fundamentals of relevance, recent exhaust system technologies, details recent or on-going projects and uncovers future research directions and potentials.
