Download or read book Laser Forming and Welding Processes written by Bekir Sami Yilbas and published by Springer Science & Business Media. This book was released on 2013-07-01 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces model studies and experimental results associated with laser forming and welding such as laser induced bending, welding of sheet metals, and related practical applications. The book provides insight into the physical processes involved with laser forming and welding. The analytical study covers the formulation of laser induced bending while the model study demonstrates the simulation of bending and welding processes using the finite element method. Analytical and numerical solutions for laser forming and welding problems are provided.
Download or read book Laser Welding written by Christopher Dawes and published by McGraw-Hill Companies. This book was released on 1992 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, application-oriented approach to laser welding technology. Table of Contents: Light and Lasers; Principles of Laser Welding and Its Characteristics; Industrial Applications; Materials Which Can Be Laser Welded; Laser Welding Parameters and Their Effects; Welding Sheet Metal Parts; Welding Plate, Tube And Pre-Machined Parts; Single and Multi-Pass Welding with Filler Materials; Process Performance Control and Monitoring; Work Handling, Laser Beam Manipulation and Process Automation; Optical Equipment; Laser Safety; Installing and Operating a Laser; Glossary. 140 illustrations.
Download or read book Laser Arc Processes and Their Applications in Welding and Material Treatment written by Peter Seyffarth and published by CRC Press. This book was released on 2002-05-23 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-Arc Processes and Their Applications in Welding and Material Treatment presents a comprehensive and timely overview of laser-arc processes for material joining and treatment, which is a current and developing research area. The authors review existing methods for combined welding and associated processes and describe theoretical investigation
Download or read book Hybrid Laser Arc Welding written by F O Olsen and published by Elsevier. This book was released on 2009-06-26 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid laser-arc welding (HLAW) is a combination of laser welding with arc welding that overcomes many of the shortfalls of both processes. This important book gives a comprehensive account of hybrid laser-arc welding technology and applications. The first part of the book reviews the characteristics of the process, including the properties of joints produced by hybrid laser-arc welding and ways of assessing weld quality. Part two discusses applications of the process to such metals as magnesium alloys, aluminium and steel as well as the use of hybrid laser-arc welding in such sectors as ship building and the automotive industry. With its distinguished editor and international team of contributors, Hybrid laser-arc welding is a valuable source of reference for all those using this important welding technology. Reviews arc and laser welding including both advantages and disadvantages of the hybrid laser-arc approach Explores the characteristics of the process including the properties of joints produced by hybrid laser-arc welding and ways of assessing weld quality Examines applications of the process including magnesium alloys, aluminium and steel with specific focus on applications in the shipbuilding and automotive industries
Download or read book Welding Processes written by Radovan Kovacevic and published by BoD – Books on Demand. This book was released on 2012-11-21 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the wide availability of literature on welding processes, a need exists to regularly update the engineering community on advancements in joining techniques of similar and dissimilar materials, in their numerical modeling, as well as in their sensing and control. In response to InTech's request to provide undergraduate and graduate students, welding engineers, and researchers with updates on recent achievements in welding, a group of 34 authors and co-authors from 14 countries representing five continents have joined to co-author this book on welding processes, free of charge to the reader. This book is divided into four sections: Laser Welding; Numerical Modeling of Welding Processes; Sensing of Welding Processes; and General Topics in Welding.
Download or read book Lasers Based Manufacturing written by Shrikrishna N. Joshi and published by Springer. This book was released on 2015-04-08 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected research papers of the AIMTDR 2014 conference on application of laser technology for various manufacturing processes such as cutting, forming, welding, sintering, cladding and micro-machining. State-of-the-art of these technologies in terms of numerical modeling, experimental studies and industrial case studies are presented. This book will enrich the knowledge of budding technocrats, graduate students of mechanical and manufacturing engineering, and researchers working in this area.
Download or read book Laser Welding written by João Pedro Oliveira and published by MDPI. This book was released on 2020-05-13 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser welding is a high-energy process used in a wide range of advanced materials to obtain micro- to macro-sized joints in both similar and dissimilar combinations. Moreover, this technique is widely used in several industries, such as automotive, aerospace, and medical industries, as well as in electrical devices. Although laser welding has been used for several decades, significant and exciting innovations often arise from both the process and/or advanced materials side.
Download or read book Fundamentals and Details of Laser Welding written by Seiji Katayama and published by Springer Nature. This book was released on 2020-10-03 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly illustrated book presents the essential information and major constituents of laser welding, including laser brazing and laser-arc hybrid welding. Students, engineers, researchers, scientists, specialists, professors, consultants, designers, and executives worldwide will fully grasp the fundamentals, the present state, and the applications of laser welding. Welding phenomena, formation mechanisms and preventive procedures of welding defects, and process monitoring and adaptive control are especially emphasized, because understanding these aspects of laser welding greatly improves the performance of work and research and solves many problems in the field. Finally, the book shows how increasingly widespread use of a variety of materials is bringing major advances to laser welding.
Download or read book Welding Processes and Appications Future Trends written by S. Muthukrishnan and published by . This book was released on 1984 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.
Download or read book The Theory of Laser Materials Processing written by John Dowden and published by Springer. This book was released on 2017-06-16 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised edition of this important reference volume presents an expanded overview of the analytical and numerical approaches employed when exploring and developing modern laser materials processing techniques. The book shows how general principles can be used to obtain insight into laser processes, whether derived from fundamental physical theory or from direct observation of experimental results. The book gives readers an understanding of the strengths and limitations of simple numerical and analytical models that can then be used as the starting-point for more elaborate models of specific practical, theoretical or commercial value. Following an introduction to the mathematical formulation of some relevant classes of physical ideas, the core of the book consists of chapters addressing key applications in detail: cutting, keyhole welding, drilling, arc and hybrid laser-arc welding, hardening, cladding and forming. The second edition includes a new a chapter on glass cutting with lasers, as employed in the display industry. A further addition is a chapter on meta-modelling, whose purpose is to construct fast, simple and reliable models based on appropriate sources of information. It then makes it easy to explore data visually and is a convenient interactive tool for scientists to improve the quality of their models and for developers when designing their processes. As in the first edition, the book ends with an updated introduction to comprehensive numerical simulation. Although the book focuses on laser interactions with materials, many of the principles and methods explored can be applied to thermal modelling in a variety of different fields and at different power levels. It is aimed principally however at academic and industrial researchers and developers in the field of laser technology.
Download or read book Application of Lasers in Manufacturing written by Uday Shanker Dixit and published by Springer. This book was released on 2018-06-29 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book mainly addresses the applications of lasers in the manufacture of various industrial components. The technologies presented here have scopes of application ranging from the macro to meso and micro level of components and features. This book includes chapters on the basic and advanced applications of lasers in the manufacturing domain. They present theoretical and practical aspects of laser technology for various applications such as laser-based machining, micro-scribing, texturing, machining of micro-sized channels; laser welding; laser-based correction of sheet metal, i.e. straightening; laser forming; and laser technology for 3-D printing. Lasers have various applications such as the production of powerful lights for illumination or decoration; measurement of velocity (transportation) and length; interferometry; printing; recording; communication; bio-medical instrumentation and pollution detection. A significant body of literature is available on the physics of lasers and types of lasers. However it has been noted there are a few books published on the “applications of lasers in manufacturing domain,” a gap that this book remedies. Gathering contributions by leading engineers and academicians in this area, it offers a valuable source of information for young scientists and research students.
Download or read book Laser Fabrication and Machining of Materials written by Narendra B. Dahotre and published by Springer Science & Business Media. This book was released on 2008-01-25 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamental principles and physical phenomena behind laser-based fabrication and machining processes. It also gives an overview of their existing and potential applications. With laser machining an emerging area in various applications ranging from bulk machining in metal forming to micromachining and microstructuring, this book provides a link between advanced materials and advanced manufacturing techniques. The interdisciplinary approach of this text will help prepare students and researchers for the next generation of manufacturing.
Download or read book AMST 05 Advanced Manufacturing Systems and Technology written by Elso Kuljanic and published by Springer Science & Business Media. This book was released on 2007-03-23 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing a product is not difficult, the difficulty consists in manufacturing a product of high quality, at a low cost and rapidly. Drastic technological advances are changing global markets very rapidly. In such conditions the ability to compete successfully must be based on innovative ideas and new products which has to be of high quality yet low in price. One way to achieve these objecti ves would be through massive investments in research of computer based technology and by applying the approaches presented in this book. The First International Conference on Advanced Manufacturing Systems and Technology AMST87 was held in Opatija (Croatia) in October 1987. The Second International Conference on Advanced Manufacturing Systems and Technology AMSV90 was held in Trento (Italy) in lune 1990. The Third, Fourth, Fifth and Sixth Conferences on Advanced Manufacturing Systems and Technology were all held in Udine (Italy) as follows: AMST93 in April 1993, AMST96 in September 1996, AMST99 in June 1999 and AMST02 in June 2002.
Download or read book Advanced Joining Processes written by Lucas F. M. da Silva and published by Springer Nature. This book was released on 2020-03-31 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent material science-based and mechanical analysis-based advances in joining processes. It includes all related processes, e.g. friction stir welding, joining by plastic deformation, laser welding, clinch joining, and adhesive bonding, as well as hybrid joints. It gathers selected full-length papers from the 1st Conference on Advanced Joining Processes.
Download or read book Advanced Welding Methods and Equipment written by Ruifeng Li and published by Springer Nature. This book was released on with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basics of Laser Material Processing written by Grigoruants and published by CRC Press. This book was released on 1994-04-04 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chapters present the problems of stresses and strains induced in metals and nonmetals in the processes of laser heating, analyze the results, offer the ways of laser treatment that dispense with subsequent machining operations, and describe the basic approaches to increase the strength of materials during laser heating. Other topics include the practical methods of implementing the processes of laser welding, cutting, hardening, alloying, and cladding (hardfacing). Basics of Laser Material Processing is designed for scientific workers and for those students in senior- and graduate-level courses.
