Download or read book Laser Doppler and Phase Doppler Measurement Techniques written by H.-E. Albrecht and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing the first comprehensive treatment, this book covers all aspects of the laser Doppler and phase Doppler measurement techniques, including light scattering from small particles, fundamental optics, system design, signal and data processing, tracer particle generation, and applications in single and two-phase flows. The book is intended as both a reference book for more experienced users as well as an instructional book for students. It provides ample material as a basis for a lecture course on the subject and represents one of the most comprehensive treatments of the phase Doppler technique to date. The book will serve as a valuable reference book in any fluid mechanics laboratory where the laser Doppler or phase Doppler techniques are used. This work reflects the authors' long practical experience in the development of the techniques and equipment, as the many examples confirm.
Download or read book The Laser Doppler Technique written by L. E. Drain and published by John Wiley & Sons. This book was released on 1980 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Measurements written by Franz Mayinger and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing possibilities of computer-aided data processing have caused a new revival of optical techniques in many areas of mechanical and chemical en gineering. Optical methods have a long tradition in heat and mass transfer and in fluid dynamics. Global experimental information is not sufficient for developing constitution equations to describe complicated phenomena in fluid dynamics or in transfer processes by a computer program . Furthermore, a detailed insight with high local and temporal resolution into the thermo-and fluiddynamic situations is necessary. Sets of equations for computer program in thermo dynamics and fluid dynamics usually consist of two types of formulations: a first one derived from the conservation laws for mass, energy and momentum, and a second one mathematically modelling transport processes like laminar or turbulent diffusion. For reliably predicting the heat transfer, for example, the velocity and temperature field in the boundary layer must be known, or a physically realistic and widely valid correlation describing the turbulence must be avail able. For a better understanding of combustion processes it is necessary to know the local concentration and temperature just ahead of the flame and in the ignition zone.
Download or read book Laser Doppler Technique written by L. E. Drain and published by . This book was released on 1975 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Delta Doppler Technique for LDV Measurements at Long Distances written by William C. Cliff and published by . This book was released on 1976 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Resolution Imaging in Microscopy and Ophthalmology written by Josef F. Bille and published by Springer. This book was released on 2019-08-13 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides a comprehensive overview of the application of the newest laser and microscope/ophthalmoscope technology in the field of high resolution imaging in microscopy and ophthalmology. Starting by describing High-Resolution 3D Light Microscopy with STED and RESOLFT, the book goes on to cover retinal and anterior segment imaging and image-guided treatment and also discusses the development of adaptive optics in vision science and ophthalmology. Using an interdisciplinary approach, the reader will learn about the latest developments and most up to date technology in the field and how these translate to a medical setting. High Resolution Imaging in Microscopy and Ophthalmology – New Frontiers in Biomedical Optics has been written by leading experts in the field and offers insights on engineering, biology, and medicine, thus being a valuable addition for scientists, engineers, and clinicians with technical and medical interest who would like to understand the equipment, the applications and the medical/biological background. Lastly, this book is dedicated to the memory of Dr. Gerhard Zinser, co-founder of Heidelberg Engineering GmbH, a scientist, a husband, a brother, a colleague, and a friend.
Download or read book An Introduction To Optoelectronic Sensors written by Antonello Cutolo and published by World Scientific. This book was released on 2009-01-08 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable book offers a comprehensive overview of the technologies and applications of optoelectronic sensors. Based on the R&D experience of more than 70 engineers and scientists, highly representative of the Italian academic and industrial community in this area, this book provides a broad and accurate description of the state-of-the-art optoelectronic technologies for sensing. The most innovative approaches, such as the use of photonic crystals, squeezed states of light and microresonators for sensing, are considered. Application areas range from environment to medicine and healthcare, from aeronautics, space, and defence to food and agriculture.Written in a self-contained manner, this volume presents both the sensing methodologies and the fundamentals of the various technologies, as well as their applications in the real world.
Download or read book Lasers in Endodontics written by Giovanni Olivi and published by Springer. This book was released on 2016-03-15 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers up-to-date information on all aspects of the use of lasers in endodontics, focusing especially on the various laser applications, including primary and permanent root canal therapies, retreatments, apical surgery and pulp therapy. Every laser technique used in endodontics is carefully described and illustrated, with detailed coverage of both conventional methods and more recent developments such as laser-activated irrigation and photon-induced photoacoustic streaming. In addition, a separate section addresses the basic science of laser dentistry, explaining the physics, describing laser–tissue interactions, and discussing different types of laser. Extensive reference is made to the international literature in order to provide the reader with a clear, evidence-based understanding of the merits of various approaches. In offering a balanced mix of descriptions of clinical applications, clinical data, scientific research and logical criticism, the book will serve as an excellent reference for a wide audience comprising general dentists as well as specialists.
Download or read book Flow Development Using the Laser Doppler Technique written by James Price Burke and published by . This book was released on 1969 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Measurement Techniques written by Kai-Erik Peiponen and published by Springer Science & Business Media. This book was released on 2009-02-12 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Devoted to new optical measurement techniques in industry as well as the life sciences, this book has a fresh perspective on the development of modern optical sensors, which are essential for the control of parameters in industrial and biomedical applications.
Download or read book The Use of a Laser Doppler Velocimeter in Supersonic Flow written by William Joseph Yanta and published by . This book was released on 1971 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Results are presented for an experimental program which investigated the application of an LDV technique in supersonic flows. This paper presents an analysis of the behavior of light-scattering particles in rapidly accelerating or shock decelerated flows, an evaluation of particle production techniques and the results of several velocity measurements. Measurements included the velocity distribution along the nozzle centerline and flow over a diamond airfoil in a Mach 3 tunnel and velocity profiles for a turbulent boundary layer in a Mach 4.8 facility. It is demonstrated that LDV measurements can be made consistently with errors of less than five percent if the particle lag is considered. (Author).
Download or read book Laser Doppler and Phase Doppler Measurement Techniques written by H.-E. Albrecht and published by Springer. This book was released on 2014-03-12 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing the first comprehensive treatment, this book covers all aspects of the laser Doppler and phase Doppler measurement techniques, including light scattering from small particles, fundamental optics, system design, signal and data processing, tracer particle generation, and applications in single and two-phase flows. The book is intended as both a reference book for more experienced users as well as an instructional book for students. It provides ample material as a basis for a lecture course on the subject and represents one of the most comprehensive treatments of the phase Doppler technique to date. The book will serve as a valuable reference book in any fluid mechanics laboratory where the laser Doppler or phase Doppler techniques are used. This work reflects the authors' long practical experience in the development of the techniques and equipment, as the many examples confirm.
Download or read book Optical Inspection of Microsystems written by Wolfgang Osten and published by CRC Press. This book was released on 2018-10-03 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Where conventional testing and inspection techniques fail at the micro-scale, optical techniques provide a fast, robust, and relatively inexpensive alternative for investigating the properties and quality of microsystems. Speed, reliability, and cost are critical factors in the continued scale-up of microsystems technology across many industries, and optical techniques are in a unique position to satisfy modern commercial and industrial demands. Optical Inspection of Microsystems is the first comprehensive, up-to-date survey of the most important and widely used full-field optical metrology and inspection technologies. Under the guidance of accomplished researcher Wolfgang Osten, expert contributors from industrial and academic institutions around the world share their expertise and experience with techniques such as image correlation, light scattering, scanning probe microscopy, confocal microscopy, fringe projection, grid and moiré techniques, interference microscopy, laser Doppler vibrometry, holography, speckle metrology, and spectroscopy. They also examine modern approaches to data acquisition and processing. The book emphasizes the evaluation of various properties to increase reliability and promote a consistent approach to optical testing. Numerous practical examples and illustrations reinforce the concepts. Supplying advanced tools for microsystem manufacturing and characterization, Optical Inspection of Microsystems enables you to reach toward a higher level of quality and reliability in modern micro-scale applications.
Download or read book Laser Velocimetry in Fluid Mechanics written by Alain Boutier and published by John Wiley & Sons. This book was released on 2013-01-09 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: In fluid mechanics, velocity measurement is fundamental in order to improve the behavior knowledge of the flow. Velocity maps help us to understand the mean flow structure and its fluctuations, in order to further validate codes. Laser velocimetry is an optical technique for velocity measurements; it is based on light scattering by tiny particles assumed to follow the flow, which allows the local fluid flow velocity and its fluctuations to be determined. It is a widely used non-intrusive technique to measure velocities in fluid flows, either locally or in a map. This book presents the various techniques of laser velocimetry, as well as their specific qualities: local measurements or in plane maps, mean or instantaneous values, 3D measurements. Flow seeding with particles is described with currently used products, as well as the appropriate aerosol generators. Post-processing of data allows us to extract synthetic information from measurements and to perform comparisons with results issued from CFD codes. The principles and characteristics of the different available techniques, all based on the scattering of light by tiny particles embedded in the flow, are described in detail; showing how they deliver different information, either locally or in a map, mean values and turbulence characteristics.
Download or read book A New Doppler Effect written by Florian Ion Petrescu and published by BoD – Books on Demand. This book was released on 2012 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Doppler effect (or Doppler shift), named after Austrian physicist Christian Doppler who proposed it in 1842 in Prague, is the change in frequency of a wave for an observer moving relative to the source of the wave. It is commonly heard when a vehicle sounding a siren or horn approaches, passes, and recedes from an observer. The received frequency is higher (compared to the emitted frequency) during the approach, it is identical at the instant of passing by, and it is lower during the recession. The relative changes in frequency can be explained as follows. When the source of the waves is moving toward the observer, each successive wave crest is emitted from a position closer to the observer than the previous wave. Therefore each wave takes slightly less time to reach the observer than the previous wave. Therefore the time between the arrival of successive wave crests at the observer is reduced, causing an increase in the frequency. While they are travelling, the distance between successive wave fronts is reduced; so the waves \\\\\\\"bunch together\\\\\\\". Conversely, if the source of waves is moving away from the observer, each wave is emitted from a position farther from the observer than the previous wave, so the arrival time between successive waves is increased, reducing the frequency. The distance between successive wave fronts is increased, so the waves "spread out". For waves that propagate in a medium, such as sound waves, the velocity of the observer and of the source is relative to the medium in which the waves are transmitted. The total Doppler Effect may therefore result from motion of the source, motion of the observer, or motion of the medium. Each of these effects is analyzed separately. For waves which do not require a medium, such as light or gravity in general relativity, only the relative difference in velocity between the observer and the source needs to be considered.
Download or read book Application of a Laser doppler Technique to the Measurement of Particle Velocity in Gas particle Two phase Flow written by Stanford University. Department of Aeronautics and Astronautics and published by . This book was released on 1966 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: In chemical propulsion, the use of metallic fuel constituents burning to particulate refractory oxides in rocket engines has forced attention to the understanding of two-phase nozzle expansion processes. In this study light from a helium-neon laser was reflected both from a fixed target and from moving particles. A lens concentrated the laser light and the light back-scattered from the particles was picked up by the same lens and directed into a Fabry-Perot scanning plate interferometer. The interferometer limited observation at any moment to those particles whose Doppler shifted frequency coincided with the interferometer transmission frequency. The light from the fixed target provided a frequency reference system, and calibrated movement of the interferometer mirror spacing provided continuous examination of velocity. Data in the form of lightscattering and number count vs velocity has been obtained for water droplets in subsonic flow, for aluminum spheres and alumina abrasive in cold supersonic flow and for aluminum and magnesium oxide in hot supersonic flow. Number count-velocity data was found to be a complicated function of particle size distribution and vector velocity distribution as well as instrument characteristics.
Download or read book Handbook of Experimental Structural Dynamics written by Randall Allemang and published by Springer. This book was released on 2022-08-06 with total page 1403 pages. Available in PDF, EPUB and Kindle. Book excerpt: The SEM Handbook of Experimental Structural Dynamics stands as a comprehensive overview and reference for its subject, applicable to workers in research, product design and manufacture, and practice. The Handbook is devoted primarily to the areas of structural mechanics served by the Society for Experimental Mechanics IMAC community, such as modal analysis, rotating machinery, structural health monitoring, shock and vibration, sensors and instrumentation, aeroelasticity, ground testing, finite element techniques, model updating, sensitivity analysis, verification and validation, experimental dynamics sub-structuring, quantification of margin and uncertainty, and testing of civil infrastructure. Chapters offer comprehensive, detailed coverage of decades of scientific and technologic advance and all demonstrate an experimental perspective. Several sections specifically discuss the various types of experimental testing and common practices utilized in the automotive, aerospace, and civil structures industries. · History of Experimental Structural Mechanics · DIC Methods - Dynamic Photogrammetry · LDV Methods · Applied Digital Signal Processing · Introduction to Spectral - Basic Measurements · Structural Measurements - FRF · Random and Shock Testing · Rotating System Analysis Methods * · Sensors Signal Conditioning Instrumentation · Design of Modal Tests · Experimental Modal Methods · Experimental Modal Parameter Evaluation · Operating Modal Analysis Methods * · Analytical Numerical Substructuring · Finite Element Model Correlation · Model Updating · Damping of Materials and Structures · Model Calibration and Validation in Structures* · Uncertainty Quantification: UQ, QMU and Statistics * · Nonlinear System Analysis Methods (Experimental) · Structural Health Monitoring and Damage Detection · Experimental Substructure Modeling · Modal Modeling · Response (Impedance) Modeling · Nonlinear Normal Mode Analysis Techniques (Analytical) * · Modal Modeling with Nonlinear Connection Elements (Analytical) · Acoustics of Structural Systems (VibroAcoustics) * · Automotive Structural Testing * · Civil Structural Testing · Aerospace Perspective for Modeling and Validation · Sports Equipment Testing * · Applied Math for Experimental Structural Mechanics * Chapter Forthcoming Contributions present important theory behind relevant experimental methods as well as application and technology. Topical authors emphasize and dissect proven methods and offer detail beyond a simple review of the literature. Additionally, chapters cover practical needs of scientists and engineers who are new to the field. In most cases, neither the pertinent theory nor, in particular, the practical issues have been presented formally in current academic textbooks. Each chapter in the Handbook represents a ’must read’ for someone new to the subject or for someone returning to the field after an absence. Reference lists in each chapter consist of the seminal papers in the literature. This Handbook stands in parallel to the SEM Handbook of Experimental Solid Mechanics, where this Handbook focuses on experimental dynamics of structures at a macro-scale often involving multiple components and materials where the SEM Handbook of Experimental Solid Mechanics focuses on experimental mechanics of materials at a nano-scale and/or micro-scale.
