Download or read book Laser Beam Shaping written by Fred M. Dickey and published by CRC Press. This book was released on 2018-09-03 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Beam Shaping: Theory and Techniques addresses the theory and practice of every important technique for lossless beam shaping. Complete with experimental results as well as guidance on when beam shaping is practical and when each technique is appropriate, the Second Edition is updated to reflect significant developments in the field. This authoritative text: Features new chapters on axicon light ring generation systems, laser-beam-splitting (fan-out) gratings, vortex beams, and microlens diffusers Describes the latest advances in beam profile measurement technology and laser beam shaping using diffractive diffusers Contains new material on wavelength dependence, channel integrators, geometrical optics, and optical software Laser Beam Shaping: Theory and Techniques, Second Edition not only provides a working understanding of the fundamentals, but also offers insight into the potential application of laser-beam-profile shaping in laser system design.

Download or read book Advancement of Selective Laser Melting by Laser Beam Shaping written by Tim Marten Wischeropp and published by Springer Nature. This book was released on 2021-11-30 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selective Laser Melting (SLM), also referred to as Laser Powder Bed Fusion (L-PBF), offers significant advantages for the manufacturing of complex, high-quality parts. However, its market share is still small compared to conventional manufacturing technologies. Major drawbacks hindering an industrial ramp-up are low productivity, high part costs and issues with quality and reproducibility. Comprehensive research has been done to overcome these challenges, but little attention has been paid to addressing them by optimizing the laser beam profile. Therefore, the author examines the effect of the laser beam profile on the productivity and process stability through both numerical and experimental investigations. The results show clear advantages an optimized laser beam profile offers.

Download or read book Laser Beam Shaping Applications written by Fred M. Dickey and published by CRC Press. This book was released on 2005-07-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The practice of shaping the irradiance profile of laser beams goes back more than three decades, and the applications of beam shaping are as diverse as they are numerous. However, until Dickey and Holswade's groundbreaking and highly popular Laser Beam Shaping: Theory and Techniques was published, there was no single, detailed treatment available on the underlying theory and basic techniques of beam shaping. Building on the foundations of this previous work, these esteemed editors have teamed with recognized expert David L. Shealy to produce the first in-depth account of beam shaping applications and design. Laser Beam Shaping Applications details the important features of beam shaping and exposes the subtleties of the theory and techniques that are best demonstrated through proven applications. In chapters contributed by prominent, active leaders in their respective specialties, the book discusses applications in lithography, laser printing, optical data storage, stable isotope separation, adaptive mirrors, and spatially dispersive lasers. The contributors share major insights, knowledge, and experience, reveal the advantages of the technologies, and include extensive references to the literature. The book concludes with a summary of beam shaping theory and techniques as well as the history of the field. Providing practical expertise, Laser Beam Shaping Applications is an extremely helpful guide to improving current laser processes, optimizing application-specific technologies, and advancing future development in the field.

Download or read book A Practical Guide to Handling Laser Diode Beams written by Haiyin Sun and published by Springer. This book was released on 2015-02-20 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the reader a practical guide to the control and characterization of laser diode beams. Laser diodes are the most widely used lasers, accounting for 50% of the global laser market. Correct handling of laser diode beams is the key to the successful use of laser diodes, and this requires an in-depth understanding of their unique properties. Following a short introduction to the working principles of laser diodes, the book describes the basics of laser diode beams and beam propagation, including Zemax modeling of a Gaussian beam propagating through a lens. The core of the book is concerned with laser diode beam manipulations: collimating and focusing, circularization and astigmatism correction, coupling into a single mode optical fiber, diffractive optics and beam shaping, and manipulation of multi transverse mode beams. The final chapter of the book covers beam characterization methods, describing the measurement of spatial and spectral properties, including wavelength and linewidth measurement techniques. The book is a significantly revised and expanded version of the title Laser Diode Beam Basics, Manipulations and Characterizations by the same author. New topics introduced in this volume include: laser diode types and working principles, non-paraxial Gaussian beam, Zemax modeling, numerical analysis of a laser diode beam, spectral property characterization methods, and power and energy characterization techniques. The book approaches the subject in a practical way with mathematical content kept to the minimum level required, making the book a convenient reference for laser diode users.

Download or read book Laser Diode Beam Basics Manipulations and Characterizations written by Haiyin Sun and published by Springer Science & Business Media. This book was released on 2012-06-16 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many optical design technical books are available for many years which mainly deal with image optics design based on geometric optics and using sequential raytracing technique. Some books slightly touched laser beam manipulation optics design. On the other hand many books on laser diodes have been published that extensively deal with laser diode physics with little touching on laser diode beam manipulations and characterizations. There are some internet resources dealing with laser diode beams. However, these internet resources have not covered enough materials with enough details on laser diode beam manipulations and characterizations. A technical book concentrated on laser diode beam manipulations and characterizations can fit in to the open and provide useful information to laser diode users. Laser Diode Beam Basics, Manipulations and Characterizations is concentrated on the very practical side of the subject, it only discusses the basic physics and mathematics that are necessary for the readers in order to understand the subject. This book is intended to provide a practical guidance and reference to those scientists and engineers who are still new to laser diode applications, and to those undergraduate and graduate students who are studying lasers and optics. Readers are expected to be able to fast and easily find the most practical and useful information about laser diodes in this book without the need of searching through a sea of information.

Download or read book Laser Beam Shaping written by Fred M. Dickey and published by CRC Press. This book was released on 2000-07-11 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation The discussion of beam shaping in this volume provides the theoretical basis and techniques for shaping the laser beam irradiance profile for various applications. The nine chapters discuss the mathematical and physical theory of lossless beam, Gaussian beam shaping, geometrical methods, optimization-based techniques for laser shaping optics, diffractive diffusers, multi-aperture beam integration systems, non-laser methods, and current technology of beam profile measurements. Annotation c. Book News, Inc., Portland, OR (booknews.com)

Download or read book Laser Beam Propagation written by Andrew Forbes and published by CRC Press. This book was released on 2014-02-14 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: How do laser beams propagate? Innovative discoveries involving laser beams and their propagation properties are at the heart of Laser Beam Propagation: Generation and Propagation of Customized Light. This book captures the essence of laser beam propagation. Divided into three parts, it explores the fundamentals of how laser beams propagate, and pro

Download or read book Handbook of Laser Micro and Nano Engineering written by KOJI SUGIOKA. and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.

Download or read book Laser Beam Shaping written by Fred M. Dickey and published by CRC Press. This book was released on 2018-09-03 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Beam Shaping: Theory and Techniques addresses the theory and practice of every important technique for lossless beam shaping. Complete with experimental results as well as guidance on when beam shaping is practical and when each technique is appropriate, the Second Edition is updated to reflect significant developments in the field. This authoritative text: Features new chapters on axicon light ring generation systems, laser-beam-splitting (fan-out) gratings, vortex beams, and microlens diffusers Describes the latest advances in beam profile measurement technology and laser beam shaping using diffractive diffusers Contains new material on wavelength dependence, channel integrators, geometrical optics, and optical software Laser Beam Shaping: Theory and Techniques, Second Edition not only provides a working understanding of the fundamentals, but also offers insight into the potential application of laser-beam-profile shaping in laser system design.

Download or read book Laser Resonators written by Alexis V. Kudryashov and published by SPIE Press. This book was released on 1999 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The resonator can be considered the real heart of any laser system, the key element that determines the properties of laser radiation, including mode structure or temporal and spatial characteristics. The theory of different laser types has been well-developed in the last few decades of the 20th century, starting with the pioneering papers of Fox, Li, Body and Gordon. But today, due to the development of new types of lasers (fibre, diode), new optical elements (adaptive mirrors, phase conjugation techniques, graded phase correctors), the development of optical technology, and new needs for industrial lasers, novel types of resonators are under investigation.

Download or read book Laser Beam Shaping Applications written by Fred M. Dickey and published by CRC Press. This book was released on 2017-02-24 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition details the important features of beam shaping and exposes the subtleties of the theory and techniques that are best demonstrated through proven applications. New chapters cover illumination light shaping in optical lithography; optical micro-manipulation of live mammalian cells through trapping, sorting, and transfection; and laser beam shaping through fiber optic beam delivery. The book discusses applications in lithography, laser printing, optical data storage, stable isotope separation, and spatially dispersive lasers. It also provides a history of the field and includes extensive references.

Download or read book Fundamentals of Laser Powder Bed Fusion of Metals written by Igor Yadroitsev and published by Elsevier. This book was released on 2021-05-23 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser powder bed fusion of metals is a technology that makes use of a laser beam to selectively melt metal powder layer-by-layer in order to fabricate complex geometries in high performance materials. The technology is currently transforming aerospace and biomedical manufacturing and its adoption is widening into other industries as well, including automotive, energy, and traditional manufacturing. With an increase in design freedom brought to bear by additive manufacturing, new opportunities are emerging for designs not possible previously and in material systems that now provide sufficient performance to be qualified in end-use mission-critical applications. After decades of research and development, laser powder bed fusion is now enabling a new era of digitally driven manufacturing. Fundamentals of Laser Powder Bed Fusion of Metals will provide the fundamental principles in a broad range of topics relating to metal laser powder bed fusion. The target audience includes new users, focusing on graduate and undergraduate students; however, this book can also serve as a reference for experienced users as well, including senior researchers and engineers in industry. The current best practices are discussed in detail, as well as the limitations, challenges, and potential research and commercial opportunities moving forward. - Presents laser powder bed fusion fundamentals, as well as their inherent challenges - Provides an up-to-date summary of this advancing technology and its potential - Provides a comprehensive textbook for universities, as well as a reference for industry - Acts as quick-reference guide

Download or read book Physical Processes in Laser Materials Interactions written by M. Bertolotti and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is a pleasure to write a few words as an introduction to the proceedings of the 1980 NATO ASI on "Physical Processes in Laser Naterial Interaction." This ASI is the ninth course of a series devoted to lasers and their applications, held under the responsibility of the Quantum Electronics Division of the European Physical Society, and for this reason known as the "Europhysics School of Quantum Electronics." Since 1971 the School has been operating with the joint direc tion of myself as representative of the academic research, and Dr. D. Roess (formerly with Siemens AEG, Munich, and now with Sick, Optik und Electronik, GmbH, Munich) for the industrial applications. Indeed the aim of the School is to alternate fundamental and applied frontier topics in the area of quantum electronics and modern optics, in order to introduce young research people from universities and industrial R&D laboratories to the new aspects of research opened by the laser.

Download or read book Coherent Laser Beam Combining written by Arnaud Brignon and published by John Wiley & Sons. This book was released on 2013-11-13 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser beam combining techniques allow increasing the power of lasers far beyond what it is possible to obtain from a single conventional laser.One step further, coherent beam combining (CBC) also helps to maintain the very unique properties of the laser emission with respect to its spectral and spatial properties. Such lasers are of major interest for many applications, including industrial, environmental, defense, and scientific applications. Recently, significant progress has beenmade in coherent beam combining lasers, with a total output power of 100 kW already achieved. Scaling analysis indicates that further increase of output power with excellent beam quality is feasible by using existing state-of-the-art lasers. Thus, the knowledge of coherent beam combining techniques will become crucial for the design of next-generation highpower lasers. The purpose of this book is to present the more recent concepts of coherent beam combining by world leader teams in the field.

Download or read book Micro Optics written by H. P. Herzig and published by CRC Press. This book was released on 1997-04-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the technology behind the plethora of modern industrial and domestic technologies which incorporate micro-optics eg. CDs, cameras, automated manufacturing systems, mobile communications etc. It includes a simple but comprehensive introduction to micro-optical developments design, and an overview of fabrication and replication tec

Download or read book Texture Analysis in Materials Science written by H.-J. Bunge and published by Elsevier. This book was released on 2013-09-03 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Texture Analysis in Materials Science Mathematical Methods focuses on the methodologies, processes, techniques, and mathematical aids in the orientation distribution of crystallites. The manuscript first offers information on the orientation of individual crystallites and orientation distributions. Topics include properties and representations of rotations, orientation distance, and ambiguity of rotation as a consequence of crystal and specimen symmetry. The book also takes a look at expansion of orientation distribution functions in series of generalized spherical harmonics, fiber textures, and methods not based on the series expansion. The publication reviews special distribution functions, texture transformation, and system of programs for the texture analysis of sheets of cubic materials. The text also ponders on the estimation of errors, texture analysis, and physical properties of polycrystalline materials. Topics include comparison of experimental and recalculated pole figures; indetermination error for incomplete pole figures; and determination of the texture coefficients from anisotropie polycrystal properties. The manuscript is a dependable reference for readers interested in the use of mathematical aids in the orientation distribution of crystallites.

Download or read book Optically Induced Nanostructures written by Karsten König and published by Walter de Gruyter GmbH & Co KG. This book was released on 2015-05-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructuring of materials is a task at the heart of many modern disciplines in mechanical engineering, as well as optics, electronics, and the life sciences. This book includes an introduction to the relevant nonlinear optical processes associated with very short laser pulses for the generation of structures far below the classical optical diffraction limit of about 200 nanometers as well as coverage of state-of-the-art technical and biomedical applications. These applications include silicon and glass wafer processing, production of nanowires, laser transfection and cell reprogramming, optical cleaning, surface treatments of implants, nanowires, 3D nanoprinting, STED lithography, friction modification, and integrated optics. The book highlights also the use of modern femtosecond laser microscopes and nanoscopes as novel nanoprocessing tools.