Download or read book Beam Instrumentation and Diagnostics written by Peter Strehl and published by Springer Science & Business Media. This book was released on 2006-06-18 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the experience of many years of teamwork with my group, the beam diagnostics group of GSI. For a long time the group was also responsible for operating the machines and application programming. In my opinion, this connection was very e?cient: ?rst, because a beam diagnostic system has to place powerful tools at the operators’ disposal; second, because data evaluation and presentation of results for machine operation demand application programs which can be handled not only by skilled experts. On the other hand, accelerator developments and improvements as well as commissioning of new machines by specialists require more complex measu- ments than those for routine machine operation. A modern beam diagnostic system, including the software tools, has to cover these demands, too. Therefore, this book should motivate physicists, constructors, electronic engineers, and computer experts to work together during the design and daily use of a beam diagnostic system. This book aims to give them ideas and tools for their work. I would not have been able to write this book without a good education in physics and many discussions with competent leaders, mentors, and c- leagues. After working about 40 years in teams on accelerators, there are so many people I have to thank that it is impossible to mention them all by name here.
Download or read book Laser Beam Diagnostics written by Robert N. Hindy and published by . This book was released on 1991 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Processing and Diagnostics written by D. Bäuerle and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser processing is now a rapidly increasing field with many real and potential applications in different areas of technology such as micromecha nics, metallurgy, integrated optics, and semiconductor device fabrication. The neces s ity for such soph i st i cated 1 i ght sources as 1 asers is based on the spatial coherence and the monochromaticity of laser light. The spatial coherence permits extreme focussing of the laser light resulting in the availability of high energy densities which can be used for strongly loca lized heat- and chemical-treatment of materials, with a resolution down to 1 ess than 1 lJIll. When us i ng pul sed or scanned cw-l asers, 1 oca 1 i zat i on in time is also possible. Additionally, the monochromaticity of laser light allows for control of the depth of heat treatment and/or selective, nonthermal bond breaking - within the surface of the material or within the molecules of the surrounding reactive atmosphere - simply by tuning the laser wavelength. These inherent advantages of laser light permit micromachining of materials (drilling, cutting, welding etc.) and also allow single-step controlled area processing of thin films and surfaces. Processes include structural transformation (removal of residual damage, grain growth in polycrystalline material, amorphization, surface hardening etc.), etching, doping, alloying, or deposition. In addition, laser processing is not 1 imited to planar substrates.
Download or read book Laser Beam Shaping written by Fred M. Dickey and published by CRC Press. This book was released on 2018-09-03 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Beam Shaping: Theory and Techniques addresses the theory and practice of every important technique for lossless beam shaping. Complete with experimental results as well as guidance on when beam shaping is practical and when each technique is appropriate, the Second Edition is updated to reflect significant developments in the field. This authoritative text: Features new chapters on axicon light ring generation systems, laser-beam-splitting (fan-out) gratings, vortex beams, and microlens diffusers Describes the latest advances in beam profile measurement technology and laser beam shaping using diffractive diffusers Contains new material on wavelength dependence, channel integrators, geometrical optics, and optical software Laser Beam Shaping: Theory and Techniques, Second Edition not only provides a working understanding of the fundamentals, but also offers insight into the potential application of laser-beam-profile shaping in laser system design.
Download or read book Beam Diagnostics and Beam Handling Systems written by Alberto Sona and published by . This book was released on 1989 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synchrotron Light Sources and Free Electron Lasers written by Eberhard J. Jaeschke and published by Springer. This book was released on 2016-05-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardly any other discovery of the nineteenth century did have such an impact on science and technology as Wilhelm Conrad Röntgen’s seminal find of the X-rays. X-ray tubes soon made their way as excellent instruments for numerous applications in medicine, biology, materials science and testing, chemistry and public security. Developing new radiation sources with higher brilliance and much extended spectral range resulted in stunning developments like the electron synchrotron and electron storage ring and the freeelectron laser. This handbook highlights these developments in fifty chapters. The reader is given not only an inside view of exciting science areas but also of design concepts for the most advanced light sources. The theory of synchrotron radiation and of the freeelectron laser, design examples and the technology basis are presented. The handbook presents advanced concepts like seeding and harmonic generation, the booming field of Terahertz radiation sources and upcoming brilliant light sources driven by laser-plasma accelerators. The applications of the most advanced light sources and the advent of nanobeams and fully coherent x-rays allow experiments from which scientists in the past could not even dream. Examples are the diffraction with nanometer resolution, imaging with a full 3D reconstruction of the object from a diffraction pattern, measuring the disorder in liquids with high spatial and temporal resolution. The 20th century was dedicated to the development and improvement of synchrotron light sources with an ever ongoing increase of brilliance. With ultrahigh brilliance sources, the 21st century will be the century of x-ray lasers and their applications. Thus, we are already close to the dream of condensed matter and biophysics: imaging single (macro)molecules and measuring their dynamics on the femtosecond timescale to produce movies with atomic resolution.
Download or read book Laser Diagnostics for Combustion Temperature and Species written by Alan C. Eckbreth and published by CRC Press. This book was released on 1996-10-10 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on spectroscopically-based, spatially-precise, laser techniques for temperature and chemical composition measurements in reacting and non-reacting flows, this book makes these powerful and important new tools in combustion research
Download or read book Unsteady Combustion written by F. Culick and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers prepared for the NATO Advanced Study Institute on "Unsteady Combustion", which was held in Praia da Granja, Portugal, 6-17 September 1993. Approximately 100 delegates from 14 countries attended. The Institute was the most recent in a series beginning with "Instrumentation for Combustion and Flow in Engines", held in Vimeiro, Portugal 1987 and followed by "Combusting Flow Diagnostics" conducted in Montechoro, Portugal in 1990. Together, these three Institutes have covered a wide range of experimental and theoretical topics arising in the research and development of combustion systems with particular emphasis on gas-turbine combustors and internal combustion engines. The emphasis has evolved roughly from instrumentation and experimental techniques to the mixture of experiment, theory and computational work covered in the present volume. As the title of this book implies, the chief aim of this Institute was to provide a broad sampling of problems arising with time-dependent behaviour in combustors. In fact, of course, that intention encompasses practically all possibilities, for "steady" combustion hardly exists if one looks sufficiently closely at the processes in a combustion chamber. The point really is that, apart from the excellent paper by Bahr (Chapter 10) discussing the technology of combustors for aircraft gas turbines, little attention is directed to matters of steady performance. The volume is divided into three parts devoted to the subjects of combustion-induced oscillations; combustion in internal combustion engines; and experimental techniques and modelling.
Download or read book Focus Like a Laser Beam written by Lisa L. Haneberg and published by John Wiley & Sons. This book was released on 2010-12-03 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Focus Like a Laser Beam, acclaimed management consultant and business blogger Lisa Haneberg offers business leaders a new way to direct their focus that, like a laser beam, is direct, fast, and on track. The book offers leaders ways to improve energy and engagement in the workplace and redirect how people communicate at work. Focus Like a Laser Beam is filled with useful suggestions for dealing with distractions and diversions and outlines the ten practices that will help leaders focus on what’s most important. Know and feel the power of laser focus Get connected with your employees Have fun and be fun Relax to energize Turn meetings into focus sessions Invite a challenge Huddle Stop multitasking and put your focus where it belongs Do one great thing Let go of outdated goals, projects, and tasks
Download or read book Excimer Laser Technology written by Dirk Basting and published by Springer Science & Business Media. This book was released on 2005-04-21 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive survey on Excimer Lasers investigates the current range of the technology, applications and devices of this commonly used laser source, as well as the future of new technologies, such as F2 laser technology. Additional chapters on optics, devices and laser systems complete this compact handbook. A must read for laser technology students, process application researchers, engineers or anyone interested in excimer laser technology. An effective and understandable introduction to the current and future status of excimer laser technology.
Download or read book Laser Induced Damage in Optical Materials written by and published by . This book was released on 1994 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Industrial Laser Handbook written by David Belforte and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing with lasers is becoming increasingly important in modern industry. This is a unique, most comprehensive handbook of laser applications to all modern branches of industry. It includes, along with the theoretical background, updates of the most recent research results, practical issues and even the most complete company and product directory and supplier's list of industrial laser and system manufacturers. Such important applications of lasers in manufacturing as welding, cutting, drilling, heat treating, surface treatment, marking, engraving, etc. are addressed in detail, from the practical point of view. A list of specific companies dealing with manufacturing aspects with lasers is given.
Download or read book Lasers in Materials Processing written by Alan Gomersall and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non ionizing Radiation Protection written by Andrew W. Wood and published by John Wiley & Sons. This book was released on 2017-04-10 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of non-ionizing radiation and its public health and environmental risks, for researchers, policy makers, and laymen This book explains the characteristics of all forms of electromagnetic non-ionizing radiation (NIR) and analyzes the relationship between exposure and its biological effects, as well as the known dose-response relationships associated with each. Taking a uniquely holistic approach to the concept of health that builds upon the WHO definition to include not only absence of disease, but the physical, mental and social well-being of individuals and the population, it reviews established and potential risks and protections, along with regulatory issues associated with each. The risks to public health of NIR, whether in the form of UV light, radio waves from wireless devices, or electric and magnetic fields associated with electrical power systems, is currently a cause of great concern among members of the public and lawmakers. But in order to separate established science from speculation and make informed decisions about how to mitigate the risks of NIR and allocate precious resources, policymakers, manufacturers, and individuals need a comprehensive source of up-to-date information based on the current scientific evidence. Written by a team of experts in their fields, this book is that source. Among other things, it: Summarizes scientific findings on the safety of different forms of NIR and the rationale behind current standards Describes devices for monitoring NIR along with the established and potential hazards of each form Explores proper protections against UV light and lasers, RF radiation, ELF fields and other forms of NIR Discusses how to avoid injuries through occupational training or public awareness programs, and how to perform medical assessments in cases of suspected NIR injuries Considers how to decide whether or not to spend money on certain mitigation measures, based on cost-benefit analyses Offering expert reviews and analyses of the latest scientific findings and public policy issues concerning the risks to public health and the environment of NIR, Non-ionizing Radiation Protection is an indispensable source of information for manufacturers, government regulators, and regulatory agencies, as well as researchers, concerned laypersons, and students.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser and Ion Beam Modification of Materials written by I. Yamada and published by Elsevier. This book was released on 2013-10-22 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser and Ion Beam Modification of Materials is a compilation of materials from the proceedings of the symposium U: Material Synthesis and Modification by Ion beams and Laser Beams. This collection discusses the founding of the KANSAI Science City in Japan, and the structures, equipment, and research projects of two institutions are discussed pertaining to eV-MeV ion beams. A description of ion beams as used in materials research and in manufacturing processes, along with trends in ion implantation technology in semiconductors, is discussed. Research into ion beams by China and its industrial uses in non-semiconductor area is noted. For industrial applications, developing technology in terms of high speed, large surface modifications and use of high doses is important. Thus, the development of different ion beam approaches is examined. Industrial applications of ion and laser processing are discussed as cluster beams are used in solid state physics and chemistry. Mention is made on a high power discharge pumped solid state physics (ArF) excimer laser as a potential light source for better material processing. Under ion beam material processing is nanofabrication using focused ion beams, important for research work in mesoscopic systems. Progress in the use of ion-beam mixing using kinetic energy of ion-beams to mingle with pre-deposited surface layers of substrate materials has shown promise. Advanced materials researchers and scientists, as well as academicians in the field of nuclear physics, will find this collection helpful.
Download or read book Laser Induced Damage in Optical Materials 1988 written by and published by . This book was released on 1989 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
