Download or read book Laser Assisted Microtechnology written by Simeon M. Metev and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-Assisted Microtechnology introduces the principles and techniques of laser-assisted microtechnology with emphasis on micromachining of thin films, microprocessing of materials, maskless laser micropatterning and laser-assisted synthesis of thin-film systems. The experimental and theoretical physico-chemical basis of every technological process is presented in detail. On the basis of some characteristic examples of applications, the capabilities of the technological methods as well as the optimum conditions for their realization are discussed. In this second edition, besides the actualization of the literature, a new chapter concerning the laser-assisted wet chemical micro etching, has been added. This is a new method for direct 3D-micro structuring of solids, with a number of potential applications.
Download or read book Laser Assisted Microtechnology 2000 written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Laser Assisted Micro and Nanotechnologies written by Vadim P. Veiko and published by Springer. This book was released on 2014-05-19 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the state of the art of laser micro- and nanotechnology. The physical fundamentals of different processes and the application are presented. The book deals with different materials like phase change and memory alloys, thin films, polymers etc. New phenomena and mechanisms of laser-matter interaction in nano-domains are explained. This book is helpful for students, postgraduates, engineers and researches working not only in the field of laser microtechnology but also in high-tech industry, like photonics, microelectronics, information technology.
Download or read book Laser Assisted Microtechnology written by Simeon M. Metev and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-Assisted Microtechnology deals with laser applications to a wide variety of problems in microelectronic design and fabrication. It covers micromachining of thin films, microprocessing of materials, maskless laser micropatterning and laser-assisted synthesis of thin-film systems. The monograph describes fundamental aspects and practical details of the technological processes as well as the optimum conditions for their realization.
Download or read book Fundamentals of Laser Assisted Micro and Nanotechnologies written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Laser assisted Micro and Nanotechnologies 2013 written by Sankt-Peterburgskij Gosudarstvennyj Universitet Informacionnych Technologij, Mechaniki i Optiki and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser assisted Micro and Nanotechnologies written by V. I. Konov and published by SPIE-International Society for Optical Engineering. This book was released on 2006 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of SPIE present the original research papers presented at SPIE conferences and other high-quality conferences in the broad-ranging fields of optics and photonics. These books provide prompt access to the latest innovations in research and technology in their respective fields. Proceedings of SPIE are among the most cited references in patent literature.
Download or read book Laser assisted Micro and Nanotechnologies 2003 written by Vadim Pavlovich Veĭko and published by SPIE-International Society for Optical Engineering. This book was released on 2004 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of SPIE present the original research papers presented at SPIE conferences and other high-quality conferences in the broad-ranging fields of optics and photonics. These books provide prompt access to the latest innovations in research and technology in their respective fields. Proceedings of SPIE are among the most cited references in patent literature.
Download or read book Proceedings of the 36th International MATADOR Conference written by Srichand Hinduja and published by Springer Science & Business Media. This book was released on 2010-08-05 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented here are 130 refereed papers given at the 36th MATADOR Conference held at The University of Manchester in July 2010. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The proceedings of this Conference contain original papers contributed by researchers from many countries on different continents. The papers cover the principles, techniques and applications in aerospace, automotive, biomedical, energy, consumable goods and process industries. The papers in this volume reflect: • the importance of manufacturing to international wealth creation; • the emerging fields of micro- and nano-manufacture; • the increasing trend towards the fabrication of parts using lasers; • the growing demand for precision engineering and part inspection techniques; and • the changing trends in manufacturing within a global environment.
Download or read book Handbook of Laser Technology and Applications written by Chunlei Guo and published by CRC Press. This book was released on 2021-05-10 with total page 1201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook gives a fully updated guide to lasers and laser technologies, including the complete range of their technical applications. The first volume outlines the fundamental components of lasers, their properties, and working principles. Key Features: • Offers a complete update of the original, bestselling work, including many brand-new chapters. • Deepens the introduction to fundamentals, from laser design and fabrication to host matrices for solid-state lasers, energy level diagrams, hosting materials, dopant energy levels, and lasers based on nonlinear effects. • Covers new laser types, including quantum cascade lasers, silicon-based lasers, titanium sapphire lasers, terahertz lasers, bismuth-doped fiber lasers, and diode-pumped alkali lasers. • Discusses the latest applications, e.g., lasers in microscopy, high-speed imaging, attosecond metrology, 3D printing, optical atomic clocks, time-resolved spectroscopy, polarization and profile measurements, pulse measurements, and laser-induced fluorescence detection. • Adds new sections on laser materials processing, laser spectroscopy, lasers in imaging, lasers in environmental sciences, and lasers in communications. This handbook is the ideal companion for scientists, engineers, and students working with lasers, including those in optics, electrical engineering, physics, chemistry, biomedicine, and other relevant areas.
Download or read book Laser Applications in Surface Science and Technology written by Horst-Günter Rubahn and published by John Wiley & Sons. This book was released on 1999-03-17 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ob zur Oberflachenanalytik oder zur Oberflachenbearbeitung - die Einsatzgebiete von Lasern in der Materialwissenschaft werden standig erweitert. Dabei ablaufende Prozesse beschranken sich gelegentlich auf einfaches Erwarmen und Schmelzen, haufig finden jedoch kompliziertere Vorgange wie die Bildung von Plasma oder kollektive Anregungen statt. Verschiedenste Techniken, die zugehorigen physikalischen Grundlagen und alle wichtigen Prozesse beschreibt dieses Buch, wobei auch neueste Themen wie ultrakurze Laserpulse oder die nichtlineare Oberflachenspektroskpoie zur Sprache kommen. (05/99)
Download or read book Process Technology for Semiconductor Lasers written by Kenichi Iga and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: A description of the design principles, seen mainly from the fabrication point of view. Following a review of the historical development and of the materials used in lasing at short to long wavelengths, the book goes on to discuss the basic design principles for semiconductor-laser devices and the epitaxy for laser production. One entire chapter is devoted to the technology of liquid-phase epitaxy, while another treats vapor-phase and beam epitaxies. The whole is rounded off with mode-control techniques and an introduction to surface-emitting lasers.
Download or read book Handbook of Laser Technology and Applications written by Colin Webb and published by CRC Press. This book was released on 2020-09-29 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The invention of the laser was one of the towering achievements of the twentieth century. At the opening of the twenty-first century we are witnessing the burgeoning of the myriad technical innovations to which that invention has led. The Handbook of Laser Technology and Applications is a practical and long-lasting reference source for scientists and engineers who work with lasers. The Handbook provides, a comprehensive guide to the current status of lasers and laser systems; it is accessible to science or engineering graduates needing no more than standard undergraduate knowledge of optics. Whilst being a self-contained reference work, the Handbook provides extensive references to contemporary work, and is a basis for studying the professional journal literature on the subject. It covers applications through detailed case studies, and is therefore well suited to readers who wish to use it to solve specific problems of their own. The first of the three volumes comprises an introduction to the basic scientific principles of lasers, laser beams and non-linear optics. The second volume describes the mechanisms and operating characteristics of specific types of laser including crystalline solid - state lasers, semiconductor diode lasers, fibre lasers, gas lasers, chemical lasers, dye lasers and many others as well as detailing the optical and electronic components which tailor the laser's performance and beam delivery systems. The third volume is devoted to case studies of applications in a wide range of subjects including materials processing, optical measurement techniques, medicine, telecommunications, data storage, spectroscopy, earth sciences and astronomy, and plasma fusion research. This vast compendium of knowledge on laser science and technology is the work of over 130 international experts, many of whom are recognised as the world leaders in their respective fields. Whether the reader is engaged in the science, technology, industrial or medical applications of lasers or is researching the subject as a manager or investor in technical enterprises they cannot fail to be informed and enlightened by the wide range of information the Handbook supplies.
Download or read book Handbook of Laser Micro and Nano Engineering written by Koji Sugioka and published by Springer. This book was released on 2021-11-13 with total page 2071 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.
Download or read book Lasers written by Charles Blain and published by Nova Publishers. This book was released on 2002 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in lasers continue to enable progress in many areas such as eye surgery, the recording industry and dozens of others. This book presents citations from the book literature for the last 25 years and groups them for ease of access which is also provided by subject, author and titles indexes.
Download or read book Handbook of Laser Technology and Applications Three Volume Set written by Colin Webb and published by CRC Press. This book was released on 2003-12-01 with total page 2779 pages. Available in PDF, EPUB and Kindle. Book excerpt: The invention of the laser was one of the towering achievements of the twentieth century. At the opening of the twenty-first century we are witnessing the burgeoning of the myriad technical innovations to which that invention has led. The Handbook of Laser Technology and Applications is a practical and long-lasting reference source for scientists a
Download or read book Micro and Nanophotonic Technologies written by Patrick Meyrueis and published by John Wiley & Sons. This book was released on 2017-03-20 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited and authored by leading experts from top institutions in Europe, the US and Asia, this comprehensive overview of micro- and nanophotonics covers the physical and chemical fundamentals, while clearly focusing on the technologies and applications in industrial R&D. As such, the book reports on the four main areas of telecommunications and display technologies; light conversion and energy generation; light-based fabrication of materials; and micro- and nanophotonic devices in metrology and control.
