Download or read book Lasers written by Hans Joachim Eichler and published by Springer. This book was released on 2018-11-19 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of laser sources and their applications in various fields of science, industry, and technology. After an introduction to the basics of laser physics, different laser types and materials for lasers are summarized in the context of a historical survey, outlining the evolution of the laser over the past five decades. This includes, amongst other aspects, gas lasers, excimer lasers, the wide range of solid-state and semiconductor lasers, and femtosecond and other pulsed lasers where particular attention is paid to high-power sources. Subsequent chapters address related topics such as laser modulation and nonlinear frequency conversion. In closing, the enormous importance of the laser is demonstrated by highlighting its current applications in everyday life and its potential for future developments. Typical applications in advanced material processing, medicine and biophotonics as well as plasma and X-ray generation for nanoscale lithography are discussed. The book provides broad and topical coverage of laser photonics and opto-electronics, focusing on significant findings and recent advances rather than in-depth theoretical studies. Thus, it is intended not only for university students and engineers, but also for scientists and professionals applying lasers in biomedicine, material processing and everyday consumer products. Further, it represents essential reading for engineers using or developing high-power lasers for scientific or industrial applications.

Download or read book Tunable Laser Applications written by F.J. Duarte and published by CRC Press. This book was released on 2016-02-22 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadly tunable lasers continue to have a tremendous impact in many and diverse fields of science and technology. From a renaissance in laser spectroscopy to Bose-Einstein condensation, the one nexus is the tunable laser. Tunable Laser Applications describes the physics and architectures of widely applied tunable laser sources. Fully updated and ex

Download or read book Basics in Dermatological Laser Applications written by Inja Bogdan Allemann and published by Karger Medical and Scientific Publishers. This book was released on 2011 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and practical overview In the last two decades, there has been a virtual explosion in the use of lasers in medicine, especially in the field of cosmetic dermatology. In fact, many of the clinical conditions presented today are solely treated by lasers. When discussing the term lasers', many different types of lasers and other similar energy-based devices have to be considered. Physicians who look upon this vast field often find themselves facing an extremely complex physics-based area of medicine with a veritable jungle of different devices on offer. This book provides a structured and comprehensive overview of the physical knowledge required to understand laser medicine and surgery. Moreover, the various clinical indications and treatments are clearly laid out and discussed. The authors, all experts in their field, have provided concise and topical chapters, which have purposely been kept generic when talking about the various lasers in order to increase the longevity of this volume.

Download or read book Optical Detection Theory for Laser Applications written by Gregory R. Osche and published by Wiley-Interscience. This book was released on 2002-08-08 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of the fundamentals of optical detection theory Laser system applications are becoming more numerous, particularly in the fields of communications and remote sensing. Filling a significant gap in the literature, Optical Detection Theory for Laser Applications addresses the theoretical aspects of optical detection and associated phenomenologies, describing the fundamental optical, statistical, and mathematical principles of the modern laser system. The book is especially valuable for its extensive treatment of direct detection statistics, which has no analog in radar detection theory and which has never before been compiled in a cohesive manner in a single book. Coverage includes: * A review of mathematical statistics and statistical decision theory * Performance of truncated and untruncated coherent and direct detection systems using Huygens-Fresnel and Gaussian beam theories * Rough surface scatter and atmospheric propagation effects * Single-pulse detection statistics for direct and coherent detection systems * Multi-pulse detection statistics for direct and coherent detection systems Supported by additional comments providing further insights into the physics or mathematics discussed and an extensive list of classic references, Optical Detection Theory for Laser Applications comprises a much-needed reference for the professional scientist or engineer, as well as a solid textbook for advanced students.

Download or read book Handbook of Laser Technology and Applications written by Chunlei Guo and published by CRC Press. This book was released on 2021-06-23 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook gives a fully updated guide to lasers and laser technologies, including the complete range of their technical applications. This third volume covers modern applications in engineering and technology, including all new and updated case studies spanning telecommunications and data storage to medicine, optical measurement, defense and security, nanomaterials processing and characterization. Key Features: • Offers a complete update of the original, bestselling work, including many brand-new chapters. • Deepens the introduction to fundamentals, from laser design and fabrication to host matrices for solid-state lasers, energy level diagrams, hosting materials, dopant energy levels, and lasers based on nonlinear effects. • Covers new laser types, including quantum cascade lasers, silicon-based lasers, titanium sapphire lasers, terahertz lasers, bismuth-doped fiber lasers, and diode-pumped alkali lasers. • Discusses the latest applications, e.g., lasers in microscopy, high-speed imaging, attosecond metrology, 3D printing, optical atomic clocks, time-resolved spectroscopy, polarization and profile measurements, pulse measurements, and laser-induced fluorescence detection. • Adds new sections on laser materials processing, laser spectroscopy, lasers in imaging, lasers in environmental sciences, and lasers in communications. This handbook is the ideal companion for scientists, engineers, and students working with lasers, including those in optics, electrical engineering, physics, chemistry, biomedicine, and other relevant areas.

Download or read book Laser Ablation and Its Applications written by Claude Phipps and published by Springer Science & Business Media. This book was released on 2007 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser ablation describes the interaction of intense optical fields with matter, in which atoms are selectively driven off by thermal or nonthermal mechanisms. The field of laser ablation physics is advancing so rapidly that its principal results are seen only in specialized journals and conferences. This is the first book that combines the most recent results in this rapidly advancing field with authoritative treatment of laser ablation and its applications, including the physics of high-power laser-matter interaction. Many practical applications exist, ranging from inertial confinement fusion to propulsion of aerostats for pollution monitoring to laser ignition of hypersonic engines to laser cleaning nanoscale contaminants in high-volume computer hard drive manufacture to direct observation of the electronic or dissociative states in atoms and molecules, to studying the properties of materials during 200kbar shocks developed in 200fs. Selecting topics which are representative of such a broad field is difficult. Laser Ablation and its Applications emphasizes the wide range of these topics rather than - as is so often the case in advanced science – focusing on one specialty or discipline. The book is divided into four sections: theory and modeling, ultrafast interactions, material processing and laser-matter interaction in novel regimes. The latter range from MALDI to ICF, SNOM’s and femtosecond nanosurgery to laser space propulsion. The book arose from the SPIE series of High Power Laser Ablation Symposia which began in 1998. It is intended for a graduate course in laser interactions with plasmas and materials, but it should be accessible to anyone with a graduate degree in physics or engineering. It is also intended as a major reference work to familiarize scientists just entering the field with laser ablation and its applications.

Download or read book Forestry Applications of Airborne Laser Scanning written by Matti Maltamo and published by Springer Science & Business Media. This book was released on 2014-04-08 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Airborne laser scanning (ALS) has emerged as one of the most promising remote sensing technologies to provide data for research and operational applications in a wide range of disciplines related to management of forest ecosystems. This book provides a comprehensive, state-of-the-art review of the research and application of ALS in a broad range of forest-related disciplines, especially forest inventory and forest ecology. However, this book is more than just a collection of individual contributions – it consists of a well-composed blend of chapters dealing with fundamental methodological issues and contributions reviewing and illustrating the use of ALS within various domains of application. The reviews provide a comprehensive and unique overview of recent research and applications that researchers, students and practitioners in forest remote sensing and forest ecosystem assessment should consider as a useful reference text.

Download or read book Industrial Applications of Lasers written by John F. Ready and published by Elsevier. This book was released on 1997-04-25 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical book with a variety of uses, this book can help applications engineers spark problem-solving techniques through the use of lasers. Industrial Application of Lasers, Second Edition takes the reader through laser fundamentals, unusual properties of laser light, types of practical lasers available, and commonly used accessory equipment. The book also applies this information to existing and developing applications. Current uses of lasers, including laser welding and cutting, electronic fabrication techniques, lightwave communications, laser-based applications in alignment, surveying, and metrology are all covered as well as discussing the potential for future applications such as all-optical computers,remote environmental monitoring, and laser-assisted thermonuclear fusion. Explains basic laser fundamentals as well as emphasizing how lasers are used for real applications in industry Describes the importance of laser safety Discusses potentially important future applications such as remote environmental monitoring Includes rare expert lore and opinion

Download or read book The Physics of Laser Plasmas and Applications Volume 1 written by Hideaki Takabe and published by Springer Nature. This book was released on 2020-08-28 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series of books discusses the physics of laser and matter interaction, fluid dynamics of high-temperature and high-density compressible plasma, and kinetic phenomena and particle dynamics in laser-produced plasma. The book (Vol.1) gives the physics of intense-laser absorption in matter and/or plasma in non-relativistic and relativistic laser-intensity regime. In many cases, it is explained with clear images of physics so that an intuitive understanding of individual physics is possible for non-specialists. For intense-laser of 1013-16 W/cm2, the laser energy is mainly absorbed via collisional process, where the oscillation energy is converted to thermal energy by non-adiabatic Coulomb collision with the ions. Collisionless interactions with the collective modes in plasma are also described. The main topics are the interaction of ultra-intense laser and plasma for the intensity near and over 1018W/cm2. In such regime, relativistic dynamics become essential. A new physics appears due to the relativistic effects, such as mass correction, relativistic nonlinear force, chaos physics of particle motions, and so on. The book provides clearly the theoretical base for challenging the laser-plasma interaction physics in the wide range of power lasers. It is suitable as a textbook for upper-undergraduate and graduate students as well as for readers who want to understand the whole physics structure about what happen when an intense-laser irradiates any materials including solids, gas etc. Explaining the physics intuitively without complicated mathematics, it is also a valuable resource for engineering students and researchers as well as for self-study.

Download or read book Lasers for Medical Applications written by Helena Jelínková and published by Elsevier. This book was released on 2013-09-30 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers have a wide and growing range of applications in medicine. Lasers for Medical Applications summarises the wealth of recent research on the principles, technologies and application of lasers in diagnostics, therapy and surgery. Part one gives an overview of the use of lasers in medicine, key principles of lasers and radiation interactions with tissue. To understand the wide diversity and therefore the large possible choice of these devices for a specific diagnosis or treatment, the respective types of the laser (solid state, gas, dye, and semiconductor) are reviewed in part two. Part three describes diagnostic laser methods, for example optical coherence tomography, spectroscopy, optical biopsy, and time-resolved fluorescence polarization spectroscopy. Those methods help doctors to refine the scope of involvement of the particular body part or, for example, to specify the extent of a tumor. Part four concentrates on the therapeutic applications of laser radiation in particular branches of medicine, including ophthalmology, dermatology, cardiology, urology, gynecology, otorhinolaryngology (ORL), neurology, dentistry, orthopaedic surgery and cancer therapy, as well as laser coatings of implants. The final chapter includes the safety precautions with which the staff working with laser instruments must be familiar. With its distinguished editor and international team of contributors, this important book summarizes international achievements in the field of laser applications in medicine in the past 50 years. It provides a valuable contribution to laser medicine by outstanding experts in medicine and engineering. Describes the interaction of laser light with tissue Reviews every type of laser used in medicine: solid state, gas, dye and semiconductor Describes the use of lasers for diagnostics

Download or read book Laser Applications in Surface Science and Technology written by Horst-Günter Rubahn and published by John Wiley & Sons. This book was released on 1999-03-17 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ob zur Oberflachenanalytik oder zur Oberflachenbearbeitung - die Einsatzgebiete von Lasern in der Materialwissenschaft werden standig erweitert. Dabei ablaufende Prozesse beschranken sich gelegentlich auf einfaches Erwarmen und Schmelzen, haufig finden jedoch kompliziertere Vorgange wie die Bildung von Plasma oder kollektive Anregungen statt. Verschiedenste Techniken, die zugehorigen physikalischen Grundlagen und alle wichtigen Prozesse beschreibt dieses Buch, wobei auch neueste Themen wie ultrakurze Laserpulse oder die nichtlineare Oberflachenspektroskpoie zur Sprache kommen. (05/99)

Download or read book Ultrashort Pulse Laser Technology written by Stefan Nolte and published by Springer. This book was released on 2015-10-19 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrashort laser pulses with durations in the femtosecond range up to a few picoseconds provide a unique method for precise materials processing or medical applications. Paired with the recent developments in ultrashort pulse lasers, this technology is finding its way into various application fields. The book gives a comprehensive overview of the principles and applications of ultrashort pulse lasers, especially applied to medicine and production technology. Recent advances in laser technology are discussed in detail. This covers the development of reliable and cheap low power laser sources as well as high average power ultrashort pulse lasers for large scale manufacturing. The fundamentals of laser-matter-interaction as well as processing strategies and the required system technology are discussed for these laser sources with respect to precise materials processing. Finally, different applications within medicine, measurement technology or materials processing are highlighted.

Download or read book Laser Tissue Interactions written by Markolf H. Niemz and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic concepts such as the optical and thermal properties of tissue, the various types of tissue ablation, and optical breakdown and its related effects are treated in detail. Special attention is given to mathematical tools (Monte Carlo simulations, the Kubelka—Munk theory etc.) and approved techniques (photodynamic therapy, laser-induced interstitial thermotherapy etc.). The part on applications reviews clinically relevant methods in modern medicine using the latest references. The last chapter covers today’s standards of laser safety, with a careful selection of essential guidelines published by the Laser Institute of America. With numerous research photographs, illustrations, tables and comprehensive summaries.

Download or read book Applications of Laser Driven Particle Acceleration written by Paul Bolton and published by CRC Press. This book was released on 2018-06-04 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book of its kind to highlight the unique capabilities of laser-driven acceleration and its diverse potential, Applications of Laser-Driven Particle Acceleration presents the basic understanding of acceleration concepts and envisioned prospects for selected applications. As the main focus, this new book explores exciting and diverse application possibilities, with emphasis on those uniquely enabled by the laser driver that can also be meaningful and realistic for potential users. It also emphasises distinction, in the accelerator context, between laser-driven accelerated particle sources and the integrated laser-driven particle accelerator system (all-optical and hybrid versions). A key aim of the book is to inform multiple, interdisciplinary research communities of the new possibilities available and to inspire them to engage with laser-driven acceleration, further motivating and advancing this developing field. Material is presented in a thorough yet accessible manner, making it a valuable reference text for general scientific and engineering researchers who are not necessarily subject matter experts. Applications of Laser-Driven Particle Acceleration is edited by Professors Paul R. Bolton, Katia Parodi, and Jörg Schreiber from the Department of Medical Physics at the Ludwig-Maximilians-Universität München in München, Germany. Features: Reviews the current understanding and state-of-the-art capabilities of laser-driven particle acceleration and associated energetic photon and neutron generation Presents the intrinsically unique features of laser-driven acceleration and particle bunch yields Edited by internationally renowned researchers, with chapter contributions from global experts

Download or read book Laser Additive Manufacturing written by Milan Brandt and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing: Materials, Design, Technologies, and Applications provides the latest information on this highly efficient method of layer-based manufacturing using metals, plastics, or composite materials. The technology is particularly suitable for the production of complex components with high precision for a range of industries, including aerospace, automotive, and medical engineering. This book provides a comprehensive review of the technology and its range of applications. Part One looks at materials suitable for laser AM processes, with Part Two discussing design strategies for AM. Parts Three and Four review the most widely-used AM technique, powder bed fusion (PBF) and discuss other AM techniques, such as directed energy deposition, sheet lamination, jetting techniques, extrusion techniques, and vat photopolymerization. The final section explores the range of applications of laser AM. Provides a comprehensive one-volume overview of advances in laser additive manufacturing Presents detailed coverage of the latest techniques used for laser additive manufacturing Reviews both established and emerging areas of application

Download or read book Laser Processing of Materials written by Peter Schaaf and published by Springer Science & Business Media. This book was released on 2010-07-28 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser materials processing has made tremendous progress and is now at the forefront of industrial and medical applications. The book describes recent advances in smart and nanoscaled materials going well beyond the traditional cutting and welding applications. As no analytical methods are described the examples are really going into the details of what nowadways is possible by employing lasers for sophisticated materials processing giving rise to achievements not possible by conventional materials processing.

Download or read book Laser Measurement Technology written by Axel Donges and published by Springer. This book was released on 2014-10-14 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser measurement technology has evolved in the last years in a versatile and reflationary way. Today, its methods are indispensable for research and development activities as well as for production technology. Every physicist and engineer should therefore gain a working knowledge of laser measurement technology. This book closes the gap of existing textbooks. It introduces in a comprehensible presentation laser measurement technology in all its aspects. Numerous figures, graphs and tables allow for a fast access into the matter. In the first part of the book the important physical and optical basics are described being necessary to understand laser measurement technology. In the second part technically significant measuring methods are explained and application examples are presented. Target groups of this textbook are students of natural and engineering sciences as well as working physicists and engineers, who are interested to make themselves familiar with laser measurement technology and its fascinating potentials.