Download or read book Large Plastic Deformation and Initiation of Fracture at the Tip of a Crack in Plane Strain written by and published by . This book was released on 1976 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics covered include: finite deformation analysis of crack tip opening in elastic-plastic materials and implications for fracture initiation; path dependence of the J-integral and the role of J as a parameter characterizing the near tip field; separation energy rate for a finite crack growth step from a blunted monotonically loaded crack tip in an elastic-plastic material; finite element calculations of separation energy rate; blunting of a plane strain crack tip into a shape with vertices; and localization of plastic flow at a crack tip as a mechanism for the initiation of plane strain ductile fracture. (GHT).
Download or read book Large Plastic Deformation and Initiation of Fracture at the Tip of a Crack in Plane Strain written by Robert Maxwell McMeeking and published by . This book was released on 1976 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Large Plastic Deformation and Initiation of Fracture at the Tip of a Crack in Plane Strain written by R. M. MacMeeking and published by . This book was released on 1979 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture Mechanics written by Dominique P. Miannay and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended for engineers from a variety of disciplines dealing with structural materials, this text describes the current state of knowledge. It begins by describing the fracture process at the two extremes of scale: first in the context of atomic structures, then in terms of a continuous elastic medium. Treating the fracture process in increasingly sophisticated ways, the book then considers plastic corrections and the procedures for measuring the toughness of materials. Practical considerations are then discussed, including crack propagation, geometry dependence, flaw density, mechanisms of failure by cleavage, the ductile-brittle transition, and continuum damage mechanics. The whole is rounded off with discussions of generalised plasticity and the link between the microscopic and macroscopic aspects, and problems are provided at the end of each chapter.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1978 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elastic Plastic Fracture written by C. F. Shih and published by ASTM International. This book was released on 1983 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1987-04 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Deformation Analysis of Crack Tip Opening in Elastic plastic Materials and Implications for Fracture Initiation written by and published by . This book was released on 1976 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyses of the stress and strain fields around smoothly blunting crack tips in both non-hardening and hardening elastic-plastic materials, under contained plane strain yielding and subject to mode I opening loads, have been carried out by a finite element method suitably formulated to admit large geometry changes. The results include the crack tip shape and near-tip deformation field, and the crack tip opening displacement has been related to a parameter of the applied load, the J-integral. The hydrostatic stresses near the crack tip are limited due to the lack of constraint on the blunted tip, limiting achievable stress levels except in a very small region around the crack tip in power law hardening materials. The J-integral is found to be path independent except very close to the crack tip in the region affected by the blunted tip. Models for fracture are discussed in the light of these results including one based on the growth of voids. The rate of void growth near the tip in hardening materials seems to be little different from the rate in non-hardening materials when measured in terms of crack tip opening displacement, which leads to a prediction of higher toughness in hardening materials. It is suggested that improvement of this model would follow from better understanding of void-void and void-crack coalescence and void nucleation, and some criteria and models for these are discussed. The implications of the finite element results for fracture criteria based on critical stress, strain or both are discussed with respect to transition of fracture mode and the angle of initial crack growth. Localization of flow is discussed as a possible fracture model and as a model for void-crack coalescence.
Download or read book Advances in Fracture Research written by K. Salama and published by Elsevier. This book was released on 2013-10-22 with total page 3063 pages. Available in PDF, EPUB and Kindle. Book excerpt: Held every four years, the International Congress on Fracture is the premier international forum for the exchange of ideas between scientists and engineers involved in producing and using materials resistant to fracture and fatigue. This major six-volume work which forms the proceedings of the Seventh International Congress on Fracture therefore provides the most comprehensive account available of the current status of research into fracture and fatigue, and the application of this knowledge to the design, fabrication and operation of materials and structures. As such, it will be an essential reference for materials scientists and mechanical, structural, aeronautical and design engineers with an interest in fracture and its prevention.
Download or read book Physical Aspects of Fracture written by Elisabeth Bouchaud and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main scope of this Cargese NATO Advanced Study Institute (June 5-17 2000) was to bring together a number of international experts, covering a large spectrum of the various Physical Aspects of Fracture. As a matter of fact, lecturers as well as participants were coming from various scientific communities: mechanics, physics, materials science, with the common objective of progressing towards a multi-scale description of fracture. This volume includes papers on most materials of practical interest: from concrete to ceramics through metallic alloys, glasses, polymers and composite materials. The classical fields of damage and fracture mechanisms are addressed (critical and sub-critical quasi-static crack propagation, stress corrosion, fatigue, fatigue-corrosion . . . . as well as dynamic fracture). Brittle and ductile fractures are considered and a balance has been carefully kept between experiments, simulations and theoretical models, and between the contributions of the various communities. New topics in damage and fracture mechanics - the effect of disorder and statistical aspects, dynamic fracture, friction and fracture of interfaces - were also explored. This large overview on the Physical Aspects of Fracture shows that the old barriers built between the different scales will soon "fracture". It is no more unrealistic to imagine that a crack initiated through a molecular dynamics description could be propagated at the grain level thanks to dislocation dynamics included in a crystal plasticity model, itself implemented in a finite element code. Linking what happens at the atomic scale to fracture of structures as large as a dam is the new emerging challenge.
Download or read book NASA Technical Note written by and published by . This book was released on 1976 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cracks and Fracture written by K. Bertram Broberg and published by Elsevier. This book was released on 1999-02-24 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cracks and Fracture consists of nine chapters in logical sequence. In two introductory chapters, physical processes in the vicinity of the crack edge are discussed and the fracture process is described. Chapter 3 develops general basic concepts and relations in crack mechanics, such as path independent integrals, stress intensity factors and energy flux into the crack edge region. Chapters 4-7 deal with elastostatic cracks, stationary or slowly moving elastic-plastic cracks, elastodynamic crack mechanics and elastoplastic aspects of fracture, including dynamic fracture mechanics. Appendices include general formulae, the basic theory of analytic functions, introduction to Laplace and Hankel transforms and description of certain basic relations, for instance for stress waves in solids. There is an extensive bibliography, containing references to both classical and recent work, and a comprehensive index. Presents an extensive bibliography containing references to both classical and recent works and a comprehensive index Appendices include general formulas, the basic theory of analytic functions, introduction to Laplace and Hankel transforms, and descriptions of certain basic relations, for instance for stress waves in solids
Download or read book Plastic Deformation and Fracture of Materials written by Robert W. Cahn and published by Wiley-VCH. This book was released on 1991 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Science and Technology A Comprehensive Treatment Edited by R.W. Cahn, P. Haasen, E.J. Kramer The 18-volume series ‘Materials Science and Technology' is the first in-depth, topic-oriented reference work devoted to this growing interdisciplinary field. A compendium of current, state-of-the-art information, it covers the most important classes of materials: metals, ceramics, glasses, polymers, semiconductors, and composites, from the fundamentals of perfect semiconductors via the physics of defects to "artificial" and amorphous semiconductors. Edited by internationally renowned figures in materials science, this series is sure to establish itself as a seminal work. Volume 6: This volume focuses on the mechanisms of plastic deformation and fatigue affecting the properties and performance of a wide variety of materials. Topics included are: flow stress and work hardening • dislocation patterning • solid solution strengthening • particle strengthening • superplasticity • inelastic deformation • cyclic deformation • fracture mechanisms • friction and wear • high-temperature deformation and creep • deformation and textures of metals at large strains
Download or read book Multiscale Deformation and Fracture in Materials and Structures written by T-J. Chuang and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Solid Mechanics considers phenomena at many levels, ranging from nano size at atomic scale through the continuum level at millimeter size to large structures at the tens of meter scale. The deformation and fracture behavior at these various scales are inextricably related to interdisciplinary methods derived from applied mathematics, physics, chemistry, and engineering mechanics. This book, in honor of James R. Rice, contains articles from his colleagues and former students that bring these sophisticated methods to bear on a wide range of problems. Articles discussing problems of deformation include topics of dislocation mechanics, second particle effects, plastic yield criterion on porous materials, hydrogen embrittlement, solid state sintering, nanophases at surfaces, adhesion and contact mechanics, diffuse instability in geomaterials, and percolation in metal deformation. In the fracture area, the topics include: elastic-plastic crack growth, dynamic fracture, stress intensity and J-integral analysis, stress-corrosion cracking, and fracture in single crystal, piezoelectric, composite and cementitious materials. The book will be a valuable resource for researchers in modern solid mechanics and can be used as reference or supplementary text in mechanical and civil engineering, applied mechanics, materials science, and engineering graduate courses on fracture mechanics, elasticity, plasticity, mechanics of materials or the application of solid mechanics to processing, and reliability of life predictions.
Download or read book Research in Progress written by and published by . This book was released on 1973 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1969 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: