Download or read book The Design and Construction of Large Optical Telescopes written by Pierre Bely and published by Springer Science & Business Media. This book was released on 2006-05-26 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is no dearth of books on telescope optics and, indeed, optics is clearly a keyelementinthedesignandconstructionoftelescopes.Butitisbynomeans the only important element. As telescopes become larger and more costly, other aspects such as structures, pointing, wavefront control, enclosures, and project management become just as critical. Although most of the technical knowledge required for all these ?elds is available in various specialized books, journal articles, and technical reports, they are not necessarily written with application to telescopes in mind. This bookisa?rstattemptatassemblinginasingletextthebasicastronomicaland engineering principles used in the design and construction of large telescopes. Itsaimistobroadlycoverallmajoraspectsofthe?eld,fromthefundamentals ofastronomicalobservationto optics, controlsystems,structural,mechanical, andthermalengineering,aswellasspecializedtopicssuchassiteselectionand program management. This subject is so vast that an in-depth treatment is obviously imprac- cal. Our intent is therefore only to provide a comprehensive introduction to the essential aspects of telescope design and construction. This book will not replace specialized scienti?c and technical texts. But we hope that it will be useful for astronomers, managers, and systems engineers who seek a basic understanding of the underlying principles of telescope making, and for s- cialists who wish to acquaint themselves with the fundamental requirements and approaches of their colleagues in other disciplines.
Download or read book Reflecting Telescope Optics II written by Raymond N. Wilson and published by Springer Science & Business Media. This book was released on 2001-07-17 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, written by the designer of the worlds largest telescope, the VLT in Chile, covers the essential modern developments in telescope optics. In the last twenty years, modern technology has revolutionized not only manufacturing and test procedures but also the entire area of quality specification. In addition to these topics, the book also covers the alignment of telescope optics, atmospheric optics, adaptive optics, reflective coatings, and ancillary equipment. Richly illustrated, this work covers important modern techniques, which makes it one of the most complete references on telescope optics.
Download or read book Instrumentation for Astronomy with Large Optical Telescopes written by C.M. Humphries and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest world-wide in the provision of new observational astro nomical facilities in the form of ground-based optical telescopes of large aperture has never been higher than exists at present. The benefits to be gained from increased aperture size, however, are only utilised effectively if efficient instrumentation is also available. There have been significant improvements recently in this area, part icularly in detector technology and data handling as well as in optical design, so that systems which are currently being developed have the capability of being vastly more powerful in terms of the efficient use of photons than those which existed only 5 years ago. The rationale for the decision by Commission 9 of the International Astronomical Union to hold IAU Colloquium 67, therefore, was to obtain reports on these developments with the emphasis placed upon overall efficiency of the complete observational system - from telescope aperture right through to detector output. A fitting venue for the meeting was the site of the 6 metre BTA (Bolshoi Azimuth Telescope) at Zelenchukskaya in the Caucasus mount ains, USSR. The BTA is operated by the Special Astrophysical Observatory located at Nizhnij Arkhyz, a few kilometres from the telescope itself.
Download or read book Optical Design Methods Applications and Large Optics written by André Masson and published by . This book was released on 1989 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Optomechanical Engineering written by Anees Ahmad and published by CRC Press. This book was released on 2017-07-11 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook covers all major aspects of optomechanical engineering - from conceptual design to fabrication and integration of complex optical systems. The practical information within is ideal for optical and optomechanical engineers and scientists involved in the design, development and integration of modern optical systems for commercial, space, and military applications. Charts, tables, figures, and photos augment this already impressive text. Fully revised, the new edition includes 4 new chapters: Plastic optics, Optomechanical tolerancing and error budgets, Analysis and design of flexures, and Optomechanical constraint equations.
Download or read book Handbook of Visual Optics Two Volume Set written by Pablo Artal and published by CRC Press. This book was released on 2017-06-27 with total page 1967 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Visual Optics offers an authoritative overview of encyclopedic knowledge in the field of physiological optics. It builds from fundamental concepts to the science and technology of instruments and practical procedures of vision correction, integrating expert knowledge from physics, medicine, biology, psychology, and engineering. The chapters comprehensively cover all aspects of modern study and practice, from optical principles and optics of the eye and retina to novel ophthalmic tools for imaging and visual testing, devices and techniques for visual correction, and the relationship between ocular optics and visual perception.
Download or read book Instabilities and Chaos in Quantum Optics II written by N.B. Abraham and published by Springer Science & Business Media. This book was released on 1988-09-01 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains tutorial papers from the lectures and seminars presented at the NATO Advanced Study Institute on "Instabilities and Chaos in Quantum Optics", held at the "Il Ciocco" Conference Center, Castelvecchio Pascoli, Lucca, Italy, June 28-July 7, 1987. The title of the volume is designated Instabilities and Chaos in Quantum Optics II, because of the nearly coincident publication of a collection of articles on research in this field edited by F.T. Arecchi and R.G. Harrison [Instabilities and Chaos in Quantum Optics, (Springer, Berlin, 1987) 1. That volume provides more detailed information about some of these topics. Together they will serve as a comprehensive and tutorial pair of companion volumes. This school was directed by Prof. Massimo Inguscio, of the Department of Physics, University of Naples, Naples, Italy to whom we express our gratitude on behalf of all lecturers and students. The Scientific Advisory Committee consisted of N.B. Abraham of Bryn Mawr College; F.T. Arecchi of the National Institute of Optics in Florence and the University of Florence, and L.A. Lugiato of the Politechnic Institute of Torino. The school continues the long tradition of Europhysics Summer Schools in Quantum Electronics which have provided instruction and training for young researchers and advanced students working in this field for almost twenty years.
Download or read book Infrared Tools For Solar Antrophysics What s Next Proceedings Of The Fifteenth National Solar Observatory sacramento Peak Summer Workshop written by Jeffrey R Kuhn and published by World Scientific. This book was released on 1995-06-29 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings sample new results derived from extended-objected IR observations and explore the capabilities of large-aperture, low-scattered-light instrumentation. The latest results from IR solar observations are described and a broad range of night-time problems from gravitational lens detection to planetary detection are explored in the context of what capabilities a large reflecting coronagraphic telescope could offer.
Download or read book Handbook of Optical Engineering written by Daniel Malacara and published by CRC Press. This book was released on 2001-05-31 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook explains principles, processes, methods, and procedures of optical engineering in a concise and practical way. It emphasizes fundamental approaches and provides useful formulas and step-by-step worked-out examples to demonstrate applications and clarify calculation methods. The book covers refractive, reflective, and diffractive optical components; lens optical devices; modern fringe pattern analysis; optical metrology; Fourier optics and optical image processing; electro-optical and acousto-optical devices; spatial and spectral filters; optical fibers and accessories; optical fabrication; and more. It includes over 2,000 tables, flow charts, graphs, schematics, drawings, photographs, and mathematical expressions.
Download or read book Optical Instruments Pt II written by Rudolf Kingslake and published by Elsevier. This book was released on 2012-12-02 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Optics and Optical Engineering, Volume V: Optical Instruments, Part II covers the principles and mode of operation of various optical instruments. This book contains 11 chapters that complete the series of 50 chapters, which provide information on many aspects of applied optics. The opening chapters of this book deal with the principles and properties of dispersing prisms and diffraction gratings. The subsequent chapters describe the principles and polarizing properties of spectrographs, monochromators, and spectrophotometers. Other chapters are devoted to the mode of operation and properties of other optical instruments, such as colorimeters, astronomical telescopes, and military, surveying, tracking, and medical optical instruments. The final chapters examine the fundamentals and applications of ophthalmic instruments and motion picture equipment. This text will be of value to optical scientists, engineers, and researchers.
Download or read book Opto Mechanical Systems Design Volume 2 written by Paul Yoder and published by CRC Press. This book was released on 2017-12-19 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Opto-Mechanical Systems Design, Fourth Edition is different in many ways from its three earlier editions: coauthor Daniel Vukobratovich has brought his broad expertise in materials, opto-mechanical design, analysis of optical instruments, large mirrors, and structures to bear throughout the book; Jan Nijenhuis has contributed a comprehensive new chapter on kinematics and applications of flexures; and several other experts in special aspects of opto-mechanics have contributed portions of other chapters. An expanded feature—a total of 110 worked-out design examples—has been added to several chapters to show how the theory, equations, and analytical methods can be applied by the reader. Finally, the extended text, new illustrations, new tables of data, and new references have warranted publication of this work in the form of two separate but closely entwined volumes. This second volume, Design and Analysis of Large Mirrors and Structures, concentrates on the design and mounting of significantly larger optics and their structures, including a new and important topic: detailed consideration of factors affecting large mirror performance. The book details how to design and fabricate very large single-substrate, segmented, and lightweight mirrors; describes mountings for large mirrors with their optical axes in vertical, horizontal, and variable orientations; indicates how metal and composite mirrors differ from ones made of glass; explains key design aspects of optical instrument structural design; and takes a look at an emerging technology—the evolution and applications of silicon and silicon carbide in mirrors and other types of components for optical applications.
Download or read book Sol Gel Processing and Applications written by Y.A. Attia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: During my professional career, I developed a strong interest in sol-gel technology, and worked on both xerogel and aerogel systems. My fascination with aerogels has driven me to explore their commercial potential, which is currently an important component of my company's business plan. Together with my co-workers, I have also worked on the preparation of controlled PZT and silica xerogels as well as thin film coatings of metals by the sol-gel technology, These experiences convinced me of the tremendous potentials of this technology. A conviction that is shared by many scientists, engineers, and business leaders around the globe. Many sol-gel derived products are already articles of commerce. However, to expand the commercial potential of sol-gel technology, two challenges must be met: (1) the quality of sol-gel derived products must continue to meet or exceed the quality of competing products, (2) the production cost of sol-gel products (specially aerogels) must continued to decline. A key to lowering the costs of sol-gel products is finding inexpensive precursors.
Download or read book Advanced Optical Instruments and Techniques written by Daniel Malacara Hernández and published by CRC Press. This book was released on 2017-11-22 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Optical Instruments and Techniques includes twenty-three chapters providing processes, methods, and procedures of cutting-edge optics engineering design and instrumentation. Topics include biomedical instrumentation and basic and advanced interferometry. Optical metrology is discussed, including point and full-field methods. Active and adaptive optics, holography, radiometry, the human eye, and visible light are covered as well as materials, including photonics, nanophotonics, anisotropic materials, and metamaterials.
Download or read book Contemporary Nonlinear Optics written by Robert Boyd and published by Academic Press. This book was released on 2012-12-02 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contemporary Nonlinear Optics discusses the different activities in the field of nonlinear optics. The book is comprised of 10 chapters. Chapter 1 presents a description of the field of nonlinear guided-wave optics. Chapter 2 surveys a new branch of nonlinear optics under the heading optical solitons. Chapter 3 reviews recent progress in the field of optical phase conjugation. Chapter 4 discusses ultrafast nonlinear optics, a field that is growing rapidly with the ability of generating and controlling femtosecond optical pulses. Chapter 5 examines a branch of nonlinear optics that may be termed nonlinear quantum optics. Chapter 6 reviews the new field of photorefractive adaptive neural networks. Chapter 7 presents a discussion of recent successes in the development of nonlinear optical media based on organic materials. Chapter 8 reviews the field of nonlinear optics in quantum confined structures. Chapter 9 reviews the field of nonlinear laser spectroscopy, with emphasis on advances made during the 1980s. Finally, Chapter 10 reviews the field of nonlinear optical dynamics by considering nonlinear optical systems that exhibit temporal, spatial, or spatio-temporal instabilities. This book is a valuable source for physicists and other scientists interested in optical systems and neural networks.
Download or read book Dynamics Of Non linear Optical Systems Proceedings Of The International Workshop written by L Pesquera and published by World Scientific. This book was released on 1989-04-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The meeting will provide an up-to-date, state-of-the-art exposition of results and techniques concerning theoretical and experimental studies of optical devices showing strong non-linear behaviour. Special attention will be paid towards the production of intense squeezed and sub-Poissionian light, formation of spatial patterns in laser systems, atomic dynamics in intense laser fields and the characterization of instabilities and chaotic dynamics in optical media.
Download or read book Opto Mechanical Systems Design written by Paul R. Yoder Jr. and published by CRC Press. This book was released on 2005-12-09 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: After nearly two decades, Paul Yoder's Opto-Mechanical Systems Design continues to be the reference of choice for professionals fusing optical and mechanical components into advanced, high-performance instruments. Yoder's authoritative systems-oriented coverage and down-to-earth approach fosters the deep-seated knowledge needed to continually push
Download or read book Opto Mechanical Systems Design Volume 1 written by Paul Yoder and published by CRC Press. This book was released on 2017-12-19 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Opto-Mechanical Systems Design, Fourth Edition is different in many ways from its three earlier editions: coauthor Daniel Vukobratovich has brought his broad expertise in materials, opto-mechanical design, analysis of optical instruments, large mirrors, and structures to bear throughout the book; Jan Nijenhuis has contributed a comprehensive new chapter on kinematics and applications of flexures; and several other experts in special aspects of opto-mechanics have contributed portions of other chapters. An expanded feature—a total of 110 worked-out design examples—has been added to several chapters to show how the theory, equations, and analytical methods can be applied by the reader. Finally, the extended text, new illustrations, new tables of data, and new references have warranted publication of this work in the form of two separate but closely entwined volumes. This first volume, Design and Analysis of Opto-Mechanical Assemblies, addresses topics pertaining primarily to optics smaller than 50 cm aperture. It summarizes the opto-mechanical design process, considers pertinent environmental influences, lists and updates key parameters for materials, illustrates numerous ways for mounting individual and multiple lenses, shows typical ways to design and mount windows and similar components, details designs for many types of prisms and techniques for mounting them, suggests designs and mounting techniques for small mirrors, explains the benefits of kinematic design and uses of flexures, describes how to analyze various types of opto-mechanical interfaces, demonstrates how the strength of glass can be determined and how to estimate stress generated in optics, and explains how changing temperature affects opto-mechanical assemblies.
