Download or read book Large Deformation Stress Relaxation and Bi axial Compression Recovery of Gluten Representing Different Wheat Classes written by Stephen Josef Chapman and published by . This book was released on 2011 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the great variety of physicochemical and rheological tests available for measuring wheat flour, dough and gluten quality, the US wheat classification system still relies primarily on wheat kernel hardness and growing season to differentiate between cultivars. To better understand and differentiate wheat cultivars of the same class, the tensile strength, and stress-relaxation behavior of gluten from 36 wheat cultivars was measured and compared to other available physicochemical parameters, including but not limited to protein content, glutenin macropolymer content (GMP) and bread loaf volume . In addition a novel compression-recovery (CORE) instrument was used to measure the degree of recovery of gluten from 15 common US wheat cultivars. Gluten tensile strength ranged from 0.04 to 0.43 N at 500% extension, while the degree of recovery ranged from 5 to 78 %. Measuring gluten strength clearly differentiates cultivars within a wheat class; nonetheless it is not a good predictor of baking quality on its own in terms of bread volume. Gluten strength is highly correlated with mixograph mixing times (r=0.879) and degree of recovery (r=0.855), suggesting that dough development time is influenced by gluten strength and that the CORE instrument is a suitable alternative to tensile testing, since it is less time intensive and laborious to use.
Download or read book Gluten Free Food Science and Technology written by Eimear Gallagher and published by John Wiley & Sons. This book was released on 2009-09-08 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coeliac disease (CD) and other allergic reactions/intolerances to gluten are on the rise, largely due to improved diagnostic procedures and changes in eating habits. The worldwide incidence of coeliac disease has been predicted to increase by a factor of ten over the next number of years, and this has resulted in a growing market for high quality gluten-free cereal products. However, the removal of gluten presents major problems for bakers. Currently, many gluten-free products on the market are of low quality and short shelf life, exhibiting poor mouthfeel and flavour. This challenge to the cereal technologist and baker alike has led to the search for alternatives to gluten in the manufacture of gluten-free bakery products. This volume provides an overview for the food industry of issues related to the increasing prevalence of coeliac disease and gluten intolerance. The properties of gluten are discussed in relation to its classification and important functional characteristics, and the nutritional value of gluten-free products is also addressed. The book examines the diversity of ingredients that can be used to replace gluten and how the ingredient combinations and subsequent rheological and manufacturing properties of a range of gluten-free products, e.g. doughs, breads, biscuits and beer may be manipulated. Recommendations are given regarding the most suitable ingredients for different gluten-free products. The book is directed at ingredient manufacturers, bakers, cereal scientists and coeliac associations and societies. It will also be of interest to academic food science departments for assisting with undergraduate studies and postgraduate research. The Author Dr Eimear Gallagher, Ashtown Food Research Centre, Teagasc - The Irish Agriculture and Food Development Authority, Dublin, Ireland Also available from Wiley-Blackwell Management of Food Allergens Edited by J. Coutts and R. Fielder ISBN 9781405167581 Bakery Manufacture and Quality - Water Control and Effects Second Edition S. Cauvain and L. Young ISBN 9781405176132 Whole Grains and Health Edited by L. Marquart et al ISBN 9780813807775
Download or read book Future of Flour written by Lutz Popper and published by . This book was released on 2006 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Chorleywood Bread Process written by Stanley P. Cauvain and published by Woodhead Publishing. This book was released on 2006-03-24 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of the Chorleywood Bread Process was a watershed in baking. It sparked changes in improver and ingredient technology, process and equipment design which have had a profound impact on baking processes and the structure of the industry. Written by two of the world's leading experts on the process, this important book explains its underlying principles and ways of maximising its potential in producing a wide range of baked products.After a brief review of the basic principles of bread making, the book outlines the development and fundamental characteristics of the Chorleywood Bread Process. The following group of chapters review the key steps in the process, beginning with ingredient quality and quantities. Other chapters consider dough mixing and processing. Building on this foundation, the authors then review common quality defects and how they can be prevented or resolved. The book then considers how knowledge-based software systems can help to manage the process. The concluding chapters review the range of bakery products that can be produced using the process, how it can best be applied in different kinds of bakery and likely future developments.The Chorleywood Bread Process is a standard work for all bakers around the world wishing to maximise the potential of the process, and for scientists, technologists and students wanting a better understanding of the process and its place in commercial bread making. - The first book to describe the Chorleywood Bread Process - Reviews ingredient quality and quantities - Considers how knowledge-based software systems can help manage the process
Download or read book Handbook of Food Engineering written by Dennis R. Heldman and published by CRC Press. This book was released on 2018-12-19 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the complexity of the food supply system increases, the focus on processes used to convert raw food materials and ingredients into consumer food products becomes more important. The Handbook of Food Engineering, Third Edition, continues to provide students and food engineering professionals with the latest information needed to improve the efficiency of the food supply system. As with the previous editions, this book contains the latest information on the thermophysical properties of foods and kinetic constants needed to estimate changes in key components of foods during manufacturing and distribution. Illustrations are used to demonstrate the applications of the information to process design. Researchers should be able to use the information to pursue new directions in process development and design, and to identify future directions for research on the physical properties of foods and kinetics of changes in the food throughout the supply system. Features Covers basic concepts of transport and storage of liquids and solids, heating and cooling of foods, and food ingredients New chapter covers nanoscale science in food systems Includes chapters on mass transfer in foods and membrane processes for liquid concentration and other applications Discusses specific unit operations on freezing, concentration, dehydration, thermal processing, and extrusion The first four chapters of the Third Edition focus primarily on the properties of foods and food ingredients with a new chapter on nanoscale applications in foods. Each of the eleven chapters that follow has a focus on one of the more traditional unit operations used throughout the food supply system. Major revisions and/or updates have been incorporated into chapters on heating and cooling processes, membrane processes, extrusion processes, and cleaning operations.
Download or read book Technology of Breadmaking written by Stanley P. Cauvain and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Not another book on breadmaking! A forgiveable reaction given the length of time over which bread has been made and the number of texts which have been written about the subject. To study breadmaking is to realize that, like many other food processes, it is constantly changing as processing methodologies become increasingly more sophisticated, yet at the same time we realize that we are dealing with a food stuff, the forms of which are very traditional. We can, for example, look at ancient illustrations of breads in manuscripts and paintings and recognize prod ucts which we still make today. This contrast of ancient and modern embodied in a single processed foodstuff is part of what makes bread such a unique subject for study. We cannot, for example, say the same for a can of baked beans! Another aspect of the uniqueness of breadmaking lies in the requirement for a thorough understanding of the link between raw materials and processing meth ods in order to make an edible product. This is mainly true because of the special properties of wheat proteins, aspects of which are explored in most of the chapters of this book. Wheat is a product of the natural environment, and while breeding and farming practices can modify aspects of wheat quality, we millers and bakers still have to respond to the strong influences of the environment.
Download or read book Engineering Properties of Foods written by M.A. Rao and published by CRC Press. This book was released on 2014-10-31 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten years have passed since this reference's last edition - making Engineering Properties of Foods, Third Edition the must-have resource for those interested in food properties and their variations. Defined are food properties and the necessary theoretical background for each. Also evaluated is the usefulness of each property i
Download or read book Natural Fibers Plastics and Composites written by Frederick T. Wallenberger and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dough Rheology and Baked Product Texture written by H. Faridi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cereal chemists are interested in rheology because the dough undergoes some type of deformation in every phase of the conversion of flour into baked products. During mixing, dough is subjected to extreme deformations, many that exceed the rupture limit; during fermentation, the deformations are much smaller and therefore exhibit a different set of rheological properties; during sheeting and molding, deformations are at an intermediate level; and, finally, during proofing and baking, the dough is subjected to a range of deformations at varying temperatures. Accordingly, the application of rheological concepts to explain the behavior of dough seems a natural requirement of research on the interrelationships among flour constituents, added ingredients, process parameters, and the required characteristics of the final baked product. At any moment in the baking process, the rheological behavior, that is, the nature of the deformation, exhibited by a specific dough derives from the applied stress and how long the stress is maintained. The resulting deformation may be simple, such as pure viscous flow or elastic deformation, and therefore easy to define precisely. Moreover, under some conditions of stress and time (i. e. , shear rate), doughs behave as ideal materials and their behavior follows theory derived from fundamental concepts. Under usual conditions encountered in baking, however, the rheological behavior is far from ideal; shear rates vary widely and sample size and dimensions are ill-defined.
Download or read book Food Processing written by J. Scott Smith and published by John Wiley & Sons. This book was released on 2008-02-28 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renowned international academicians and food industry professionals have collaborated to create Food Processing: Principles and Applications. This practical, fully illustrated resource examines the principles of food processing and demonstrates their application by describing the stages and operations for manufacturing different categories of basic food products. Ideal as an undergraduate text, Food Processing stands apart in three ways: The expertise of the contributing authors is unparalleled among food processing texts today. The text is written mostly by non-engineers for other non-engineers and is therefore user-friendly and easy to read. It is one of the rare texts to use commodity manufacturing to illustrate the principles of food processing. As a hands-on guide to the essential processing principles and their application, this book serves as a relevant primary or supplemental text for students of food science and as a valuable tool for food industry professionals.
Download or read book Nordic Nutrition Recommendations 2012 written by Nordic Council of Ministers and published by Nordic Council of Ministers. This book was released on 2014-03-06 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nordic countries have collaborated in setting guidelines for dietary composition and recommended intakes of nutrients for several decades through the joint publication of the Nordic Nutrition Recommendations (NNR). This 5th edition, the NNR 2012, gives Dietary Reference Values (DRVs) for nutrients, and compared with earlier editions more emphasis has been put on evaluating the scientific evidence for the role of food and food patterns contributing to the prevention of the major diet-related chronic diseases. Recommendations on physical activity are included and interaction with physical activity has been taken into account for the individual nutrient recommendations wherever appropriate. A chapter on sustainable food consumption has been added. A Nordic perspective has been accounted for in setting the reference values.The NNR 2012 has used an evidence-based and transparent approach in assessing associations between nutrients and foods and certain health outcomes. Systematic reviews form the basis for the recommendations of several nutrients and topics, while a less stringent update has been done for others. The systematic reviews and individual chapters have been peer reviewed and the systematic reviews are published in the Food & Nutrition Research journal. The draft chapters were subject to an open public consultation. Recommendations have been changed only when sufficient scientific evidence has evolved since the 4th edition. The primary aim of the NNR 2012 is to present the scientific background of the recommendations and their application. A secondary aim is for the NNR 2012 to function as a basis for the national recommendations that are adopted by the individual
Download or read book Handbook of Brewing written by Hans Michael Eßlinger and published by John Wiley & Sons. This book was released on 2009-04-22 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference combines the technological know-how from five centuries of industrial-scale brewing to meet the needs of a global economy. The editor and authors draw on the expertise gained in the world's most competitive beer market (Germany), where many of the current technologies were first introduced. Following a look at the history of beer brewing, the book goes on to discuss raw materials, fermentation, maturation and storage, filtration and stabilization, special production methods and beermix beverages. Further chapters investigate the properties and quality of beer, flavor stability, analysis and quality control, microbiology and certification, as well as physiology and toxicology. Such modern aspects as automation, energy and environmental protection are also considered. Regional processes and specialties are addressed throughout the entire book, making this a truly global resource on brewing.
Download or read book Coffee Pulp written by José Edgar Braham and published by . This book was released on 1979 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Food Processing Technology written by P.J. Fellows and published by Elsevier. This book was released on 2009-06-22 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Food processing technology was quickly adopted as the standard text by many food science and technology courses. This completely revised and updated third edition consolidates the position of this textbook as the best single-volume introduction to food manufacturing technologies available. This edition has been updated and extended to include the many developments that have taken place since the second edition was published. In particular, advances in microprocessor control of equipment, 'minimal' processing technologies, functional foods, developments in 'active' or 'intelligent' packaging, and storage and distribution logistics are described. Technologies that relate to cost savings, environmental improvement or enhanced product quality are highlighted. Additionally, sections in each chapter on the impact of processing on food-borne micro-organisms are included for the first time. - Introduces a range of processing techniques that are used in food manufacturing - Explains the key principles of each process, including the equipment used and the effects of processing on micro-organisms that contaminate foods - Describes post-processing operations, including packaging and distribution logistics
Download or read book Handbook on Sourdough Biotechnology written by Marco Gobbetti and published by Springer Nature. This book was released on 2023-04-24 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bread and leavened bakery products have been essential to human nourishment for millennia. Traditionally, bread production has relied on the use of sourdough as a leavening agent and to impart a characteristic quality to baked goods. In recent years, improved understanding of the biodiversity and microbial ecology of sourdough microbiota, the discovery of new species, the improved management and monitoring of its meta-community and the commercialization of innovative products have vastly expanded the potential of sourdough fermentation for making baked goods. For example, raw materials such as cereals, pseudo-cereals, ancient grains, and gluten-free substrates, as well as a large number of baked good varieties (e.g., typical and industrial breads, sweet baked goods, gluten-free products) may benefit from advances in sourdough fermentation. In addition, biotechnological tools and culture properties have been discovered to improve both the shelf life and the sensory and textural qualities of baked goods, as well as their nutritional and health-promoting properties. Now in its second edition, the Handbook on Sourdough Biotechnology remains the only book dedicated completely to sourdough biotechnology with the contribution of the most experienced researchers from the field. It reviews the history of sourdough and the potential of sourdough fermentation in the production of bread and baked goods. A thorough discussion of the various processing steps includes the chemical properties of the raw matter, the taxonomy, diversity, and metabolic properties of starter yeasts and lactic acid bacteria, and the effects of sourdough fermentation on the shelf life and the sensory, textural, nutritional, and health-promoting properties of baked goods.
Download or read book Pediatric Decision Making Strategies E Book written by Albert J. Pomeranz and published by Elsevier Health Sciences. This book was released on 2015-01-08 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to accompany Nelson Textbook of Pediatrics and Nelson Essentials of Pediatrics, Pediatric Decision-Making Strategies is a concise, user-friendly reference uses a unique algorithmic approach to facilitate diagnosis, testing, and basic treatment of common pediatric disorders. For any given symptom, an algorithm guides the reader through the appropriate investigative procedures and lab tests to reach definitive diagnoses. An updated format that enhances usability makes this medical reference book a must-have for medical students, residents, and practitioners treating pediatric patients. - Explore concise, focused, and updated algorithms that cover the most common pediatric problems. - Gain imperative knowledge from an expert author team that includes Dr. Robert M. Kliegman (of the Nelson line of textbooks), as well as references to related chapters in both Nelson Textbook of Pediatrics and Nelson Essentials of Pediatrics. - Quickly access important information with a new standard format and trim size for practicality and usability. - Expert Consult eBook version included with purchase. This enhanced eBook experience allows you to search all of the text, figures, algorithms, and references from the book on a variety of devices.
Download or read book Bovine Medicine written by Anthony H. Andrews and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bovine Medicine provides practical and comprehensive information oncattle disease and production and is a key reference for all largeanimal vets. Since the first edition was published in 1991 therehave been significant improvements in disease control andmanagement of cattle. Almost all parts of the book have beenupdated and completely rewritten. There are new chapters onsurgery, embryo transfer, artificial insemination, ethno-veterinarymedicine and biosecurity, and a new consolidating chapter on theinteraction between the animal, environment, management anddisease. The previous edition has sold all over the world, and as aresult of this a greater emphasis has been placed on conditions andtheir treatment in areas other than temperate regions. A newsection entitled "Global Variation in Cattle Practice" has beenincluded with contributors discussing bovine medicine practice intheir part of the world. All in all this is an outstanding resource for any practisingvet and an excellent reference for veterinary students.
