Download or read book Thermal Analysis of Polymeric Materials written by Bernhard Wunderlich and published by Springer Science & Business Media. This book was released on 2005-12-06 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal analysis is an old technique. It has been neglected to some degree because developments of convenient methods of measurement have been slow and teaching of the understanding of the basics of thermal analysis is often wanting. Flexible, linear macromolecules, also not as accurately simply called polymers, make up the final, third, class of molecules which only was identified in 1920. Polymers have neverbeenfullyintegratedintothedisciplinesofscienceandengineering. Thisbook is designed to teach thermal analysis and the understanding of all materials, flexible macromolecules, as well as those of the small molecules and rigid macromolecules. The macroscopic tool of inquiry is thermal analysis, and the results are linked to microscopic molecular structure and motion. Measurements of heat and mass are the two roots of quantitative science. The macroscopic heat is connected to the microscopic atomic motion, while the macroscopic mass is linked to the microscopic atomic structure. The macroscopic unitsofmeasurementofheatandmassarethejouleandthegram,chosentobeeasily discernable by the human senses. The microscopic units of motion and structure are 12 10 the picosecond (10 seconds) and the ångstrom (10 meters), chosen to fit the atomic scales. One notes a factor of 10,000 between the two atomic units when expressed in “human” units, second and gram—with one gram being equal to one cubic centimeter when considering water. Perhaps this is the reason for the much better understanding and greater interest in the structure of materials, being closer to human experience when compared to molecular motion.

Download or read book Polymers Materials for the 21st Century written by Virgil Percec and published by . This book was released on 1995 with total page 1402 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Liquid Crystal Polymers written by D. Coates and published by iSmithers Rapra Publishing. This book was released on 2000 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid crystal polymers (LCPs) have a wide range of uses, from strong engineering plastics to delicate gels for use in liquid crystal (LC) displays. For this reason, it is essential reading for materials scientists, engineers or technologists in industry, as well as research laboratories or academia. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.

Download or read book Handbook of Polymer Crystallization written by Ewa Piorkowska and published by John Wiley & Sons. This book was released on 2013-05-30 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric crystals are more complex in nature than other materials' crystal structures due to significant structural disorder present. The only comprehensive reference on polymer crystallization, Handbook of Polymer Crystallization provides readers with a broad, in-depth guide on the subject, covering the numerous problems encountered during crystallization as well as solutions to resolve those problems to achieve the desired result. Edited by leading authorities in the field, topics explored include neat polymers, heterogeneous systems, polymer blends, polymer composites orientation induced crystallization, crystallization in nanocomposites, and crystallization in complex thermal processing conditions.

Download or read book Textile Technology Digest written by and published by . This book was released on 1998 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Maro Polymer Notes written by and published by . This book was released on 1995 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Science A Comprehensive Reference written by and published by Newnes. This book was released on 2012-12-05 with total page 7752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progress in polymer science is revealed in the chapters of Polymer Science: A Comprehensive Reference, Ten Volume Set. In Volume 1, this is reflected in the improved understanding of the properties of polymers in solution, in bulk and in confined situations such as in thin films. Volume 2 addresses new characterization techniques, such as high resolution optical microscopy, scanning probe microscopy and other procedures for surface and interface characterization. Volume 3 presents the great progress achieved in precise synthetic polymerization techniques for vinyl monomers to control macromolecular architecture: the development of metallocene and post-metallocene catalysis for olefin polymerization, new ionic polymerization procedures, and atom transfer radical polymerization, nitroxide mediated polymerization, and reversible addition-fragmentation chain transfer systems as the most often used controlled/living radical polymerization methods. Volume 4 is devoted to kinetics, mechanisms and applications of ring opening polymerization of heterocyclic monomers and cycloolefins (ROMP), as well as to various less common polymerization techniques. Polycondensation and non-chain polymerizations, including dendrimer synthesis and various "click" procedures, are covered in Volume 5. Volume 6 focuses on several aspects of controlled macromolecular architectures and soft nano-objects including hybrids and bioconjugates. Many of the achievements would have not been possible without new characterization techniques like AFM that allowed direct imaging of single molecules and nano-objects with a precision available only recently. An entirely new aspect in polymer science is based on the combination of bottom-up methods such as polymer synthesis and molecularly programmed self-assembly with top-down structuring such as lithography and surface templating, as presented in Volume 7. It encompasses polymer and nanoparticle assembly in bulk and under confined conditions or influenced by an external field, including thin films, inorganic-organic hybrids, or nanofibers. Volume 8 expands these concepts focusing on applications in advanced technologies, e.g. in electronic industry and centers on combination with top down approach and functional properties like conductivity. Another type of functionality that is of rapidly increasing importance in polymer science is introduced in volume 9. It deals with various aspects of polymers in biology and medicine, including the response of living cells and tissue to the contact with biofunctional particles and surfaces. The last volume is devoted to the scope and potential provided by environmentally benign and green polymers, as well as energy-related polymers. They discuss new technologies needed for a sustainable economy in our world of limited resources. Provides broad and in-depth coverage of all aspects of polymer science from synthesis/polymerization, properties, and characterization methods and techniques to nanostructures, sustainability and energy, and biomedical uses of polymers Provides a definitive source for those entering or researching in this area by integrating the multidisciplinary aspects of the science into one unique, up-to-date reference work Electronic version has complete cross-referencing and multi-media components Volume editors are world experts in their field (including a Nobel Prize winner)

Download or read book Integration of Fundamental Polymer Science and Technology 2 written by P.J. Lemstra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer science has matured into a fully accepted branch of materials science. This means that it can be described as a 'chain of knowledge' (Manfred Gordon), the beads of the chain representing all the topics that have to be studied in depth if the relationship between the structure of the molecules synthesized and the end-use properties of the material they constitute is to be understood. The term chain indicates the connectivity of the beads, i.e. the multidisciplinary approach required to achieve the aim, knowledge, here defined as quantitative understanding of the relationship mentioned above in all its parts. Quite a few conferences are being held at which the disciplinar beads themselves are discussed in detail, and new results within their framework are presented. In this respect, the TUPAC Microsymposia in Prague have made themselves indispensable, to mention one successful example. The bi annual TUPAC Symposia on Macromolecules, on the other hand, supply interdisciplinary meeting places, which have the advantage and the disadvantage of a large attendance. Smaller-size conferences of a similar nature can often be found on a national level. The organizers of the young, but already well-appreciated, Rolduc Meetings on the interplay between fundamental science and technology in the polymer field struck an interesting chord' when they realized that focussing on the basic science behind technological problems would serve the purpose of concentration on insight along the chain of knowledge and avoid the surrender to too large a size for the meeting to really be a meeting.

Download or read book Modulated Temperature Differential Scanning Calorimetry written by Mike Reading and published by Springer Science & Business Media. This book was released on 2006-10-12 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: MTDSC provides a step-change increase in the power of calorimetry to characterize virtually all polymer systems including curing systems, blends and semicrystalline polymers. It enables hidden transitions to be revealed, miscibility to be accurately assessed, and phases and interfaces in complex blends to be quantified. It also enables crystallinity in complex systems to be measured and provides new insights into melting behaviour. All of this is achieved by a simple modification of conventional DSC. In 1992 a new calorimetric technique was introduced that superimposed a small modulation on top of the conventional linear temperature program typically used in differential scanning calorimetry. This was combined with a method of data analysis that enabled the sample’s response to the linear component of the temperature program to be separated from its response to the periodic component. In this way, for the first time, a signal equivalent to that of conventional DSC was obtained simultaneously with a measure of the sample’s heat capacity from the modulation. The new information this provided sparked a revolution in scanning calorimetry by enabling new insights to be gained into almost all aspects of polymer characteristics. This book provides both a basic and advanced treatment of the theory of the technique followed by a detailed exposition of its application to reacting systems, blends and semicrystalline polymers by the leaders in all of these fields. It is an essential text for anybody interested in calorimetry or polymer characterization, especially if they have found that conventional DSC cannot help them with their problems.

Download or read book Liquid Crystalline Polymer Systems written by Avraam I. Isayev and published by . This book was released on 1996 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive report on the synthesis, structure, rheology, processing, performance, and applications of liquid-crystalline polymers (LCPs). Discusses self-reinforced composites prepared through the melt processing of thermoplastics and thermotropic LCPs. Addresses current research efforts in making polymer-dispersed liquid crystals. Reports recent studies on the structure and phase behavior of mesophases. Describes the synthesis and properties of new main-chain and side-chain liquid-crystalline block copolymers, mesogen-jacketed LCPs, and liquid-crystalline thermosets.

Download or read book Plenary and Invited Lectures Presented at the 2nd International Symposium on Molecular Order and Mobility in Polymer Systems written by and published by . This book was released on 1997 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comb Shaped Polymers and Liquid Crystals written by N.A. Platé and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fast Scanning Calorimetry written by Christoph Schick and published by Springer. This book was released on 2016-06-28 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decades, the scan rate range of calorimeters has been extended tremendously at the high end, from approximately 10 up to 10 000 000 °C/s and more. The combination of various calorimeters and the newly-developed Fast Scanning Calorimeters (FSC) now span 11 orders of magnitude, by which many processes can be mimicked according to the time scale(s) of chemical and physical transitions occurring during cooling, heating and isothermal stays in case heat is exchanged. This not only opens new areas of research on polymers, metals, pharmaceuticals and all kinds of substances with respect to glass transition, crystallization and melting phenomena, it also enables in-depth study of metastability and reorganization of samples on an 1 to 1000 ng scale. In addition, FSC will become a crucial tool for understanding and optimization of processing methods at high speeds like injection molding. The book resembles the state-of-the art in Thermal Analysis & Calorimetry and is an excellent starting point for both experts and newcomers in the field.

Download or read book Handbook of Liquid Crystals 8 Volume Set written by John W. Goodby and published by John Wiley & Sons. This book was released on 2014-04-14 with total page 5240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much more than a slight revision, this second edition of the successful "Handbook of Liquid Crystals" is completely restructured and streamlined, with updated as well as completely new topics, 100% more content and a new team of editors and authors. As such, it fills the gap for a definitive, single source reference for all those working in the field of organized fluids and will set the standard for the next decade. The Handbook's new structure facilitates navigation and combines the presentation of the content by topic and by liquid-crystal type: A fundamentals volume sets the stage for an understanding of the liquid crystal state of matter, while individual volumes cover the main types and forms, with a final volume bringing together the diverse liquid crystal phases through their applications. This unrivaled, all-embracing coverage represents the undiluted knowledge on liquid crystals, making the Handbook a must-have wherever liquid crystals are investigated, produced or used, and in institutions where their science and technology is taught. Also available electronically on Wiley Online Library, www.wileyonlinelibrary.com/ref/holc Volume 1: Fundamentals of Liquid Crystals Volume 2: Physical Properties and Phase Behavior of Liquid Crystals Volume 3: Nematic and Chiral Nematic Liquid Crystals Volume 4: Smectic and Columnar Liquid Crystals Volume 5: Non-Conventional Liquid Crystals Volume 6: Nanostructured and Amphiphilic Liquid Crystals Volume 7: Supermolecular and Polymeric Liquid Crystals Volume 8: Applications of Liquid Crystals

Download or read book Polymers for Light emitting Devices and Displays written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-05-27 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers for Light-Emitting Devices and Displays provides an in-depth overview of fabrication methods and unique properties of polymeric semiconductors, and their potential applications for LEDs including organic electronics, displays, and optoelectronics. Some of the chapter subjects include: • The newest polymeric materials and processes beyond the classical structure of PLED • Conjugated polymers and their application in the light-emitting diodes (OLEDs & PLEDs) as optoelectronic devices. • The novel work carried out on electrospun nanofibers used for LEDs. • The roles of diversified architectures, layers, components, and their structural modifications in determining efficiencies and parameters of PLEDs as high-performance devices. • Polymer liquid crystal devices (PLCs), their synthesis, and applications in various liquid crystal devices (LCs) and displays. • Reviews the state-of-art of materials and technologies to manufacture hybrid white light-emitting diodes based on inorganic light sources and organic wavelength converters.

Download or read book Integration of Fundamental Polymer Science and Technology written by and published by . This book was released on 1988 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Liquid Crystalline Polymers written by Lei Zhu and published by Springer. This book was released on 2020-08-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of various self-assemblies in liquid crystalline polymers and their electrical, optical, mechanical, and flame retardant properties. Liquid crystalline polymers are unique self-assembled, functional soft materials with electrical, magnetic, and thermal responses which find potential applications in numerous areas. As well as providing an overview of their synthesis, self-assembly and dynamics the various applications are also discussed. Such applications as liquid crystalline elastomers, light responsive actuators, optical reflectors, gas barrier films, and even flame retardant polymers will be presented. The book is a useful resource for undergraduates, postgraduates and experienced researchers.