Download or read book Laminar Flow and Convective Transport Processes written by Howard Brenner and published by Elsevier. This book was released on 2013-10-22 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laminar Flow and Convective Transport Processes: Scaling Principles and Asymptotic Analysis presents analytic methods for the solution of fluid mechanics and convective transport processes, all in the laminar flow regime. This book brings together the results of almost 30 years of research on the use of nondimensionalization, scaling principles, and asymptotic analysis into a comprehensive form suitable for presentation in a core graduate-level course on fluid mechanics and the convective transport of heat. A considerable amount of material on viscous-dominated flows is covered. A unique feature of this book is its emphasis on scaling principles and the use of asymptotic methods, both as a means of solution and as a basis for qualitative understanding of the correlations that exist between independent and dependent dimensionless parameters in transport processes. Laminar Flow and Convective Transport Processes is suitable for use as a textbook for graduate courses in fluid mechanics and transport phenomena and also as a reference for researchers in the field.
Download or read book Advanced Transport Phenomena written by L. Gary Leal and published by Cambridge University Press. This book was released on 2007-06-18 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Transport Phenomena is ideal as a graduate textbook. It contains a detailed discussion of modern analytic methods for the solution of fluid mechanics and heat and mass transfer problems, focusing on approximations based on scaling and asymptotic methods, beginning with the derivation of basic equations and boundary conditions and concluding with linear stability theory. Also covered are unidirectional flows, lubrication and thin-film theory, creeping flows, boundary layer theory, and convective heat and mass transport at high and low Reynolds numbers. The emphasis is on basic physics, scaling and nondimensionalization, and approximations that can be used to obtain solutions that are due either to geometric simplifications, or large or small values of dimensionless parameters. The author emphasizes setting up problems and extracting as much information as possible short of obtaining detailed solutions of differential equations. The book also focuses on the solutions of representative problems. This reflects the book's goal of teaching readers to think about the solution of transport problems.
Download or read book Transport Phenomena and Unit Operations written by Richard G. Griskey and published by John Wiley & Sons. This book was released on 2005-01-14 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of transport phenomena has long been thoroughly and expertly addressed on the graduate and theoretical levels. Now Transport Phenomena and Unit Operations: A Combined Approach endeavors not only to introduce the fundamentals of the discipline to a broader, undergraduate-level audience but also to apply itself to the concerns of practicing engineers as they design, analyze, and construct industrial equipment. Richard Griskey's innovative text combines the often separated but intimately related disciplines of transport phenomena and unit operations into one cohesive treatment. While the latter was an academic precursor to the former, undergraduate students are often exposed to one at the expense of the other. Transport Phenomena and Unit Operations bridges the gap between theory and practice, with a focus on advancing the concept of the engineer as practitioner. Chapters in this comprehensive volume include: Transport Processes and Coefficients Frictional Flow in Conduits Free and Forced Convective Heat Transfer Heat Exchangers Mass Transfer; Molecular Diffusion Equilibrium Staged Operations Mechanical Separations Each chapter contains a set of comprehensive problem sets with real-world quantitative data, affording students the opportunity to test their knowledge in practical situations. Transport Phenomena and Unit Operations is an ideal text for undergraduate engineering students as well as for engineering professionals.
Download or read book Basic Equations of the Mass Transport Through a Membrane Layer written by Endre Nagy and published by Elsevier. This book was released on 2012 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a detailed analysis of the mass transport through membrane layers and its effect on different separation processes, this book provides a comprehensive look at the theoretical and practical aspects of membrane transport properties and functions. Basic equations for every membrane are provided to predict the mass transfer rate, the concentration distribution, the convective velocity, the separation efficiency, and the effect of chemical or biochemical reaction taking into account the heterogeneity of the membrane layer to help better understand the mechanisms of the separation processes. The reader will be able to describe membrane separation processes and the membrane reactors as well as choose the most suitable membrane structure for separation and for membrane reactor. Containing detailed discussion of the latest results in transport processes and separation processes, this book is essential for chemistry students and practitioners of chemical engineering and process engineering. Detailed survey of the theoretical and practical aspects of every membrane process with specific equations Practical examples discussed in detail with clear steps Will assist in planning and preparation of more efficient membrane structure separation
Download or read book Transport Processes in Chemically Reacting Flow Systems written by Daniel E. Rosner and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport Processes in Chemically Reacting Flow Systems discusses the role, in chemically reacting flow systems, of transport processes—particularly the transport of momentum, energy, and (chemical species) mass in fluids (gases and liquids). The principles developed and often illustrated here for combustion systems are important not only for the rational design and development of engineering equipment (e.g., chemical reactors, heat exchangers, mass exchangers) but also for scientific research involving coupled transport processes and chemical reaction in flow systems. The book begins with an introduction to transport processes in chemically reactive systems. Separate chapters cover momentum, energy, and mass transport. These chapters develop, state, and exploit useful quantitative ""analogies"" between these transport phenomena, including interrelationships that remain valid even in the presence of homogeneous or heterogeneous chemical reactions. A separate chapter covers the use of transport theory in the systematization and generalization of experimental data on chemically reacting systems. The principles and methods discussed are then applied to the preliminary design of a heat exchanger for extracting power from the products of combustion in a stationary (fossil-fuel-fired) power plant. The book has been written in such a way as to be accessible to students and practicing scientists whose background has until now been confined to physical chemistry, classical physics, and/or applied mathematics.
Download or read book Transport Phenomena written by Estéban Saatdjian and published by John Wiley & Sons. This book was released on 2000-11-08 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable text, provides a much-needed overview of both the theoretical development, as well as appropriate numerical solutions, for all aspects of transport phenomena. It contains a basic introduction to many aspects of fluid mechanics, heat transfer and mass transfer, and the conservation equations for mass, energy and momentum are discussed with reference to engineering applications. Heat transfer by conduction, radiation, natural and forced convection is studied, as well as mass transfer and incompressible fluid mechanics. The second part of the book deals with numerical methods used to solve the problems encountered earlier. The basic concepts of finite difference and finite volume methods are presented. Other subjects usually covered in mathematical textbooks such as vector and tensor analysis, Laplace transforms, and Runge-Kutta methods are discussed in the Appendices. * Offers comprehensive coverage of both transport phenomena and numerical and analytical solutions to the problems. * Includes comprehensive coverage of numerical techniques. * Provides real-life problems and solutions, which are vital to the understanding and implementation of applications. This work will be welcomed not only by senior and graduate students in mechanical, aeronautical and chemical engineering, but also for engineers practising in these fields.
Download or read book Fundamentals of Biomedical Transport Processes written by Gerald E. Miller and published by Morgan & Claypool Publishers. This book was released on 2010 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport processes represent important life-sustaining elements in all humans. These include mass transfer processes, including gas exchange in the lungs, transport across capillaries and alveoli, transport across the kidneys, and transport across cell membranes. These mass transfer processes affect how oxygen and carbon dioxide are exchanged in your bloodstream, how metabolic waste products are removed from your blood, how nutrients are transported to tissues, and how all cells function throughout the body. A discussion of kidney dialysis and gas exchange mechanisms is included. Another element in biomedical transport processes is that of momentum transport and fluid flow. This describes how blood is propelled from the heart and throughout the cardiovascular system, how blood elements affect the body, including gas exchange, infection control, clotting of blood, and blood flow resistance, which affects cardiac work. A discussion of the measurement of the blood resistance to flow (viscosity), blood flow, and pressure is also included. A third element in transport processes in the human body is that of heat transfer, including heat transfer inside the body towards the periphery as well as heat transfer from the body to the environment. A discussion of temperature measurements and body protection in extreme heat conditions is also included. Table of Contents: Biomedical Mass Transport / Biofluid Mechanics and Momentum Transport / Biomedical Heat Transport
Download or read book A Review of High speed Convective Heat transfer Computation Methods written by Michael E. Tauber and published by . This book was released on 1989 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physicochemical Hydrodynamics written by Ronald F. Probstein and published by John Wiley & Sons. This book was released on 2005-02-25 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first publication of the book, a surge of interest in physicochemical hydrodynamics (PCH) has produced a flurry of advances in the field, as researchers became aware of the subject’s practical applications across numerous disciplines. The Second Edition of Ronald F. Probstein’s Physicochemical Hydrodynamics is significantly expanded and revised to provide increased coverage of the field. All of the material was supplemented with problems for students, and a solutions manual is available for instructors. The continued demand for the book necessitates that the Second Edition be reprinted in paperback so that it may be more widely available to students and practitioners. This highly respected book emphasizes rational theory and its consequences to demonstrate the underlying unity of PCH, which allows diverse phenomena to be described in physically and mathematically similar ways. Physicochemical Hydrodynamics communicates the fundamentals while, at the same time, conveying the importance of applications of PCH to a variety of fields, including: mechanical, chemical, and environmental engineering; materials science, biotechnology, microfluidics, and fluid aspects of nanotechnology. Numerous illustrations, analogies, and examples highlight the text and help to clarify and solidify students’ and professionals’ understanding of the material.
Download or read book Fundamentals of Transport Processes with Applications written by V. Kumaran and published by Cambridge University Press. This book was released on 2023-02-16 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of transport phenomena is an essential part of chemical engineering, as well as other disciplines concerned with material transformations such as biomedical engineering, microfluidics, reactor design and metallurgy. Material transformations require the motion of constituents relative to each other, the transfer of heat across materials and fluid flow. This lucid textbook introduces the student to the fundamentals and applications of transport phenomena in a single volume and explains how the outcomes of transformation processes depend on fluid flow and heat/mass transfer. It demonstrates the progression from physical concepts to the mathematical formulation, followed by the solution techniques for predicting outcomes in industrial applications. The ordering of the topics, gradual build-up of complexity and easy to read language make it a vital resource for anyone looking for an introduction to the domain. It also provides a foundation for advanced courses in fluid mechanics, multiphase flows and turbulence.
Download or read book Analytical Solutions for Transport Processes written by Günter Brenn and published by Springer. This book was released on 2016-07-26 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides analytical solutions to a number of classical problems in transport processes, i.e. in fluid mechanics, heat and mass transfer. Expanding computing power and more efficient numerical methods have increased the importance of computational tools. However, the interpretation of these results is often difficult and the computational results need to be tested against the analytical results, making analytical solutions a valuable commodity. Furthermore, analytical solutions for transport processes provide a much deeper understanding of the physical phenomena involved in a given process than do corresponding numerical solutions. Though this book primarily addresses the needs of researchers and practitioners, it may also be beneficial for graduate students just entering the field.
Download or read book Convective Heat Transfer written by I. Pop and published by Elsevier. This book was released on 2001-02-23 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in studying the phenomena of convective heat and mass transfer between an ambient fluid and a body which is immersed in it stems both from fundamental considerations, such as the development of better insights into the nature of the underlying physical processes which take place, and from practical considerations, such as the fact that these idealised configurations serve as a launching pad for modelling the analogous transfer processes in more realistic physical systems. Such idealised geometries also provide a test ground for checking the validity of theoretical analyses. Consequently, an immense research effort has been expended in exploring and understanding the convective heat and mass transfer processes between a fluid and submerged objects of various shapes. Among several geometries which have received considerable attention are plates, circular and elliptical cylinders, and spheres, although much information is also available for some other bodies, such as corrugated surfaces or bodies of relatively complicated shapes. The book is a unified progress report which captures the spirit of the work in progress in boundary-layer heat transfer research and also identifies potential difficulties and areas for further study. In addition, this work provides new material on convective heat and mass transfer, as well as a fresh look at basic methods in heat transfer. Extensive references are included in order to stimulate further studies of the problems considered. A state-of-the-art picture of boundary-layer heat transfer today is presented by listing and commenting also upon the most recent successful efforts and identifying the needs for further research.
Download or read book Transport Phenomena in Materials Processing written by David R. Poirier and published by Springer. This book was released on 2016-12-06 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides a teachable and readable approach to transport phenomena (momentum, heat, and mass transport) by providing numerous examples and applications, which are particularly important to metallurgical, ceramic, and materials engineers. Because the authors feel that it is important for students and practicing engineers to visualize the physical situations, they have attempted to lead the reader through the development and solution of the relevant differential equations by applying the familiar principles of conservation to numerous situations and by including many worked examples in each chapter. The book is organized in a manner characteristic of other texts in transport phenomena. Section I deals with the properties and mechanics of fluid motion; Section II with thermal properties and heat transfer; and Section III with diffusion and mass transfer. The authors depart from tradition by building on a presumed understanding of the relationships between the structure and properties of matter, particularly in the chapters devoted to the transport properties (viscosity, thermal conductivity, and the diffusion coefficients). In addition, generous portions of the text, numerous examples, and many problems at the ends of the chapters apply transport phenomena to materials processing.
Download or read book Transport Phenomena in Micro Process Engineering written by Norbert Kockmann and published by Springer Science & Business Media. This book was released on 2007-11-12 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the fundamentals of chemical engineering are presented with respect to applications in micro system technology, microfluidics, and transport processes within microstructures. Special features of the book include the state-of-the-art in micro process engineering, a detailed treatment of transport phenomena for engineers, and a design methodology from transport effects to economic considerations.
Download or read book Transport Processes and Unit Operations written by Christie J. Geankoplis and published by Allyn & Bacon. This book was released on 1983 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new third edition provides a modern, unified treatment of the basic transport processes of momentum, heat, and mass transfer, as well as a broad treatment of the unit operations of chemical engineering. Coverage includes the latest membrane separation processes; discussion of bioprocesses; comprehensive treatment of the transport processes of momentum, heat, and mass transfer; adsorption processes; and more. A useful, up-to-date reference for practicing chemical engineers, agricultural engineers, food scientists, environmental engineers, biochemical engineers, and others who work in the process industries.
Download or read book An Introduction to Fluid Mechanics and Transport Phenomena written by G. Hauke and published by Springer Science & Business Media. This book was released on 2008-08-26 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the foundations of fluid mechanics and transport phenomena in a concise way. It is suitable as an introduction to the subject as it contains many examples, proposed problems and a chapter for self-evaluation.
Download or read book Encyclopedia of Membranes written by Enrico Drioli and published by Springer. This book was released on 2016-07-14 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: A landmark work covering the major aspects of the science, technology and application of membrane operations and related fields, from basic phenomena to the most advanced applications and future perspectives. Over 1500 concise entries in an A-Z format cover a vibrant field with a multitude of applications in diverse disciplines such as biotechnology, medicine, agro-food and petrochemical industries, environmental protection, as well as drinking water supply. Coverage includes membrane reactors and catalytic design (catalytic membrane reactors). Practically all unit operations of process engineering can be redesigned as membrane unit operations (e. g. membrane distillation, membrane crystallization, membrane stripping, membrane scrubbing). Entries are provided by an international team of experts from academia, research institutions as well as from industry.
