Download or read book Lagrange Multiplier Approach to Variational Problems and Applications written by Kazufumi Ito and published by SIAM. This book was released on 2008-11-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyses Lagrange multiplier theory and demonstrates its impact on the development of numerical algorithms for variational problems in function spaces.
Download or read book Mechanics Analysis and Geometry 200 Years after Lagrange written by M. Francaviglia and published by Elsevier. This book was released on 2012-12-02 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a logically balanced and authoritative account of the different branches and problems of mathematical physics that Lagrange studied and developed, this volume presents up-to-date developments in differential goemetry, dynamical systems, the calculus of variations, and celestial and analytical mechanics.
Download or read book Elementary Course in Lagrange s Equations and Their Applications to Solutions of Problems of Dynamics written by Nicholas Wladimir Akímoff and published by . This book was released on 1917 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solved Problems in Lagrangian and Hamiltonian Mechanics written by Claude Gignoux and published by Springer Science & Business Media. This book was released on 2009-07-14 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this work is to bridge the gap between the well-known Newtonian mechanics and the studies on chaos, ordinarily reserved to experts. Several topics are treated: Lagrangian, Hamiltonian and Jacobi formalisms, studies of integrable and quasi-integrable systems. The chapter devoted to chaos also enables a simple presentation of the KAM theorem. All the important notions are recalled in summaries of the lectures. They are illustrated by many original problems, stemming from real-life situations, the solutions of which are worked out in great detail for the benefit of the reader. This book will be of interest to undergraduate students as well as others whose work involves mechanics, physics and engineering in general.
Download or read book Theory of Extremal Problems written by and published by Elsevier. This book was released on 2009-06-15 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of Extremal Problems
Download or read book Nonholonomic Mechanics and Control written by A.M. Bloch and published by Springer. This book was released on 2015-11-05 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores connections between control theory and geometric mechanics. The author links control theory with a geometric view of classical mechanics in both its Lagrangian and Hamiltonian formulations, and in particular with the theory of mechanical systems subject to motion constraints. The synthesis is appropriate as there is a rich connection between mechanics and nonlinear control theory. The book provides a unified treatment of nonlinear control theory and constrained mechanical systems that incorporates material not available in other recent texts. The book benefits graduate students and researchers in the area who want to enhance their understanding and enhance their techniques.
Download or read book Mathematical Methods and Models for Economists written by Angel de la Fuente and published by Cambridge University Press. This book was released on 2000-01-28 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: A textbook for a first-year PhD course in mathematics for economists and a reference for graduate students in economics.
Download or read book A History of Analysis written by Hans Niels Jahnke and published by American Mathematical Soc.. This book was released on with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis as an independent subject was created as part of the scientific revolution in the seventeenth century. Kepler, Galileo, Descartes, Fermat, Huygens, Newton, and Leibniz, to name but a few, contributed to its genesis. Since the end of the seventeenth century, the historical progress of mathematical analysis has displayed unique vitality and momentum. No other mathematical field has so profoundly influenced the development of modern scientific thinking. Describing this multidimensional historical development requires an in-depth discussion which includes a reconstruction of general trends and an examination of the specific problems. This volume is designed as a collective work of authors who are proven experts in the history of mathematics. It clarifies the conceptual change that analysis underwent during its development while elucidating the influence of specific applications and describing the relevance of biographical and philosophical backgrounds. The first ten chapters of the book outline chronological development and the last three chapters survey the history of differential equations, the calculus of variations, and functional analysis. Special features are a separate chapter on the development of the theory of complex functions in the nineteenth century and two chapters on the influence of physics on analysis. One is about the origins of analytical mechanics, and one treats the development of boundary-value problems of mathematical physics (especially potential theory) in the nineteenth century. The book presents an accurate and very readable account of the history of analysis. Each chapter provides a comprehensive bibliography. Mathematical examples have been carefully chosen so that readers with a modest background in mathematics can follow them. It is suitable for mathematical historians and a general mathematical audience.
Download or read book Library of Congress Subject Headings written by Library of Congress and published by . This book was released on 2012 with total page 1608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopaedia of Mathematics written by M. Hazewinkel and published by Springer. This book was released on 2013-11-11 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction To The Fractional Calculus Of Variations written by Delfim F M Torres and published by World Scientific Publishing Company. This book was released on 2012-09-14 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable book provides a broad introduction to the fascinating and beautiful subject of Fractional Calculus of Variations (FCV). In 1996, FVC evolved in order to better describe non-conservative systems in mechanics. The inclusion of non-conservatism is extremely important from the point of view of applications. Forces that do not store energy are always present in real systems. They remove energy from the systems and, as a consequence, Noether's conservation laws cease to be valid. However, it is still possible to obtain the validity of Noether's principle using FCV. The new theory provides a more realistic approach to physics, allowing us to consider non-conservative systems in a natural way. The authors prove the necessary Euler-Lagrange conditions and corresponding Noether theorems for several types of fractional variational problems, with and without constraints, using Lagrangian and Hamiltonian formalisms. Sufficient optimality conditions are also obtained under convexity, and Leitmann's direct method is discussed within the framework of FCV.The book is self-contained and unified in presentation. It may be used as an advanced textbook by graduate students and ambitious undergraduates in mathematics and mechanics. It provides an opportunity for an introduction to FCV for experienced researchers. The explanations in the book are detailed, in order to capture the interest of the curious reader, and the book provides the necessary background material required to go further into the subject and explore the rich research literature./a
Download or read book Introduction to the Calculus of Variations written by Hans Sagan and published by Courier Corporation. This book was released on 2012-04-26 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough understanding of calculus of variations and prepares readers for the study of modern optimal control theory. Selected variational problems and over 400 exercises. Bibliography. 1969 edition.
Download or read book Control Theory and its Applications written by Roxin and published by CRC Press. This book was released on 1997-01-23 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The general context of this book is applied to systems in n-dimensional space. Emphasis is placed on a general approach to control theory, independent of optimization, and demonstrates a novel approach by converting a given dynamical system into a control system, in order to obtain a deeper understanding of its mode of action. Contents of the monograph include a presentation of the basic concepts and results of control theory, the typical and classical behaviour of control systems, techniques for transforming dynamic systems into control systems, and the systematic approach to study control systems in applications, as shown in many examples.
Download or read book An Introduction to the Calculus of Variations written by L.A. Pars and published by Courier Corporation. This book was released on 2013-12-10 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clear, rigorous introductory treatment covers applications to geometry, dynamics, and physics. It focuses upon problems with one independent variable, connecting abstract theory with its use in concrete problems. 1962 edition.
Download or read book Geometric Control Theory written by Velimir Jurdjevic and published by Cambridge University Press. This book was released on 1997 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometric control theory is concerned with the evolution of systems subject to physical laws but having some degree of freedom through which motion is to be controlled. This book describes the mathematical theory inspired by the irreversible nature of time evolving events. The first part of the book deals with the issue of being able to steer the system from any point of departure to any desired destination. The second part deals with optimal control, the question of finding the best possible course. An overlap with mathematical physics is demonstrated by the Maximum principle, a fundamental principle of optimality arising from geometric control, which is applied to time-evolving systems governed by physics as well as to man-made systems governed by controls. Applications are drawn from geometry, mechanics, and control of dynamical systems. The geometric language in which the results are expressed allows clear visual interpretations and makes the book accessible to physicists and engineers as well as to mathematicians.
Download or read book Regularization Methods for Ill Posed Optimal Control Problems written by Frank Pörner and published by BoD – Books on Demand. This book was released on 2018-10-04 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ill-posed optimization problems appear in a wide range of mathematical applications, and their numerical solution requires the use of appropriate regularization techniques. In order to understand these techniques, a thorough analysis is inevitable. The main subject of this book are quadratic optimal control problems subject to elliptic linear or semi-linear partial differential equations. Depending on the structure of the differential equation, different regularization techniques are employed, and their analysis leads to novel results such as rate of convergence estimates.
Download or read book Fuzzy Geometric Programming written by Bing-Yuan Cao and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy geometric programming was originated by the author in the Proceed ing of the second IFSA conferences, 1987(Tokyo) 14 years ago. Later, the paper was invited for formal publication in the International Journal of Fuzzy Sets and Systems. From then on, more and more papers have been written by scholars all over the world who have been interested in its research. So this programming method has been acknowledged by experts and has gradually formed a new branch of fuzzy mathematics. lnspired by Zadeh's fuzzy sets theory, fuzzy geometric programming emerges from the combination of fuzzy sets theory with geometric programming, where models are built in the fuzzy posynomial and the reverse geometric program ming. The present book is intended to discuss fuzziness of objective function and constraint conditions, a variety of fuzzy numbers in coefficients and vari ables and problems about multi-objective fuzzy geometric programming. It establishes and rounds out an entire theory system, showing that there exist conditions of fuzzy optimal or most satisfactory solutions in fuzzy geometric ptogramming, and it develops some effective algorithms. In order to introduce this new branch, the book aims at the exposition of three points: encompassing ideas and conception, theory and methods, and diffusion and application. lt lays more emphasis on the second point than the first one, and less on the third. Besides, it introduces some knowledge of classical geometric programming and of fuzzy sets theory and application examples of fuzzy geometric programming in electric power systems as weil.
