Download or read book La Fatigue des mat riaux et des structures written by Claude Bathias and published by Maloine ; Montréal, Qué. : Presses de l'Université de Montréal. This book was released on 1980 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Damage written by Christi Lalanne and published by CRC Press. This book was released on 2002-03-29 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Series: This important new series of five volumes has been written with both the professional engineers and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and crucially important areas of mechanical engineering, from both the theoretical and practical standpoints. As all products need to be designed to withstand the environmental conditions to which they are likely to be subjected, prototypes must be verified by calculation and laboratory tests, the latter according to specifications from national or international standards. The concept of tailoring the product to its environment has gradually developed whereby, from the very start of a design project, through the to the standards specifications and testing procedures on th e prototype, the real environment in which the product being tested will be functioning is taken into account. The five volumes of Mechanical Shock and Vibration cover all the issues that need to be addressed in this area of mechanical engineering. The theoretical analyses are placed in the context of the real world and of laboratory tests - essential for the development of specifications. Volume IV: Fatigue Damage Fatigue damage in a system with one degree of freedom is one of the two criteria applied when comparing the severity of vibratory environments. The same criterion is also employed for a specifciation representing the effects produced by the set of vibrations imposed in a real environment. In this volume, which is devoted to the calculation of fatigue damage, the author explores the hypotheses adopted to describe the behavior of material suffering fatigue and the laws of fatigue accumulation. He also considers the methods of counting the response peaks, which are used to establish the histogram when it is impossible to use the probability density of the peaks obtained with a Gaussian signal. The expressions for mean damage and its standard deviation are established and other hypotheses are tested.
Download or read book Structural Components written by Dominique Francois and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical tests presented in this book are essential for determining the basic properties of the materials used. Areas covered include elasticity, tensile and compression tests, hardness, endurance tests and dynamic tests.
Download or read book Fatigue Mechanisms Advances in Quantitative Measurment of Physical Damage written by and published by ASTM International. This book was released on with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue of Materials and Structures written by Claude Bathias and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of mechanical structures with predictable and improved durability cannot be achieved without a thorough understanding of the mechanisms of fatigue damage and more specifically the relationships between the microstructure of materials and their fatigue properties. Written by leading researchers in the field, this book, along with the complementary books Fatigue of Materials and Structures: Fundamentals and Application to Damage and Design (both also edited by Claude Bathias and André Pineau), provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, polymers and composites. Each chapter is devoted to one of the major classes of materials or to different types of fatigue damage, thereby providing overall coverage of the field. This book deals with multiaxial fatigue, thermomechanical fatigue, fretting-fatigue, influence of defects on fatigue life, cumulative damage and damage tolerance, and will be an important and much used reference for students, practicing engineers and researchers studying fracture and fatigue in numerous areas of materials science and engineering, mechanical, nuclear and aerospace engineering.
Download or read book Mat riaux et structures written by and published by . This book was released on 1987 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Vibration and Shock Analysis Fatigue Damage written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration and Shock Analysis, Second Edition Volume 4: Fatigue Damage Fatigue damage in a system with one degree of freedom is one of the two criteria applied when comparing the severity of vibratory environments. The same criterion is also employed for a specification representing the effects produced by the set of vibrations imposed in a real-world environment. In this volume, which is devoted to the calculation of fatigue damage, the author explores the various hypotheses and models used to describe the behavior of material suffering fatigue and the laws of fatigue accumulation. He also considers the methods of counting response peaks, which are used to establish a histogram when it is impossible to use the probability density of the peaks obtained with a Gaussian signal. The expressions for mean damage and its standard deviation are established and other hypotheses are tested. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.
Download or read book Les aciers inoxydables duplex Trait MIM s rie mat riaux et m tallurgie written by ALVAREZ-ARMAS Iris and published by Lavoisier. This book was released on 2012-04-16 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Les aciers inoxydables duplex sont des alliages Fe-Cr-Ni-Mo dont l'utilisation s'est fortement accrue depuis 10 ans. Leur structure biphasée leur assure une plus haute résistance mécanique et une plus haute résistance à la corrosion que n'ont les aciers inoxydables austénitiques standard. Ces nuances duplex ont un succès commercial continument croissant pour un large domaine d'applications (secteurs énergétiques, industries du gaz et du pétrole, industries chimiques, chimiquiers, industries du papier et de la pâte à papier…), dû à leurs très bonnes propriétés et leur relativement faible coût.
Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
Download or read book Hydro Environmental Analysis written by James L. Martin and published by CRC Press. This book was released on 2013-12-04 with total page 5742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on fundamental principles, Hydro-Environmental Analysis: Freshwater Environments presents in-depth information about freshwater environments and how they are influenced by regulation. It provides a holistic approach, exploring the factors that impact water quality and quantity, and the regulations, policy and management methods that are necessary to maintain this vital resource. It offers a historical viewpoint as well as an overview and foundation of the physical, chemical, and biological characteristics affecting the management of freshwater environments. The book concentrates on broad and general concepts, providing an interdisciplinary foundation. The author covers the methods of measurement and classification; chemical, physical, and biological characteristics; indicators of ecological health; and management and restoration. He also considers common indicators of environmental health; characteristics and operations of regulatory control structures; applicable laws and regulations; and restoration methods. The text delves into rivers and streams in the first half and lakes and reservoirs in the second half. Each section centers on the characteristics of those systems and methods of classification, and then moves on to discuss the physical, chemical, and biological characteristics of each. In the section on lakes and reservoirs, it examines the characteristics and operations of regulatory structures, and presents the methods commonly used to assess the environmental health or integrity of these water bodies. It also introduces considerations for restoration, and presents two unique aquatic environments: wetlands and reservoir tailwaters. Written from an engineering perspective, the book is an ideal introduction to the aquatic and limnological sciences for students of environmental science, as well as students of environmental engineering. It also serves as a reference for engineers and scientists involved in the management, regulation, or restoration of freshwater environments.
Download or read book Bulletin RILEM written by International Union of Testing and Research Laboratories for Materials and Structures and published by . This book was released on 1963 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Welding of Tubular Structures written by Sam Stuart and published by Elsevier. This book was released on 2016-08-09 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welding of Tubular Structures focuses on the testing, processes, and techniques involved in welding tubular structures in different environments and conditions. The book stresses that the analysis of weldment testing is valuable to the structural integrity of every welded material. Presenting the literature of various authors who have conducted experiments and tests on this topic, the book starts by outlining the testing measures done on weldments on offshore structures, hangars, towers, and other edifices. These discussions are backed up by numerical representations to support the claims of authors, particularly on the effectiveness of the techniques used in welding. The book also presents a comparative study on the behavior of steel, aluminum, and other materials when subjected to stress. This discussion is followed by experiments to test the strength of the welded materials. Much attention is given when these materials start to crack and suffer from fatigue. With this in consideration, analysis is particularly devoted to the research on why these welded materials fail. The text is a vital source of information to those in the welding sector, particularly those working in offshore structures.
Download or read book Fracture Mechanics 2 written by Ammar Grous and published by John Wiley & Sons. This book was released on 2013-02-05 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second book of a 3-volume set on Fracture Mechanics completes the first volume through the analysis of adjustment tests suited to correctly validating the justified use of the laws conforming to the behavior of the materials and structures under study. This volume focuses on the vast range of statistical distributions encountered in reliability. Its aim is to run statistical measurements, to present a report on enhanced measures in mechanical reliability and to evaluate the reliability of repairable or unrepairable systems. To achieve this, the author presents a theoretical and practice-based approach on the following themes: criteria of failures; Bayesian applied probability; Markov chains; Monte Carlo simulation as well as many other solved case studies. This book distinguishes itself from other works in the field through its originality in presenting an educational approach which aims at helping practitioners both in academia and industry. It is intended for technicians, engineers, designers, students, and teachers working in the fields of engineering and vocational education. The main objective of the author is to provide an assessment of indicators of quality and reliability to aid in decision-making. To this end, an intuitive and practical approach, based on mathematical rigor, is recommended.
Download or read book Mechanical Vibration Shock Fatigue damage written by Christian Lalanne and published by . This book was released on 2002 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book M canique de propagation et de bifurcation des fissures written by RECHONaman and published by Lavoisier. This book was released on 2012-04-16 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Les objectifs de la mécanique de la rupture sont double, d'une part ils concernent la description des champs mécaniques au voisinage de la pointe de la fissure et les énergies qui leur sont associées et d'autre part, ils traitent de l'évaluation de la nocivité d'une fissure en terme de la propagation de celle-ci. Deux champs d'étude constituent la structure de cet ouvrage, l'un relatif à la modélisation de la singularité induite par la pointe d'une fissure qui est relatée dans le premier tome intitulé : Modélisation des champs mécaniques en pointe de fissure et des singularités. Après un premier volume intitulé "Mécanique de la rupture par fissuration", ce deuxième tome traite des critères de propagation et de bifurcation de fissure en milieu élastique et élastoplastique sous des chargements monotones (Rupture fragile) et dynamique (Rupture par Fatigue). Les solutions analytiques obtenues ne peuvent pas être utilisées dans les structures à géométrie et conditions aux limites variées, alors il sera nécessaire de faire appel aux méthodes d'analyse numérique et plus particulièrement à la méthode des éléments finis. Deux chapitres abordent ces applications numériques : l'un, en tome I, relatif à l'introduction au calcul par éléments finis des structures fissurées et l'autre, dans le tome II traitant de la prévision de la rupture par fissuration des éléments de structures métalliques soumises à la fatigue.
Download or read book Fiabilit m canique appliqu e tudes de cas concrets written by GROUS Ammar and published by Lavoisier. This book was released on 2013-02-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: La fiabilité anticipe et prévoit le futur en vue d’améliorer les performances et le niveau de sûreté par l’optimisation des stratégies d’exploitation. Elle a fait preuve d’une évolution notable au niveau des matériaux et des structures. Largement inspiré des modèles de la mécanique de rupture, cet ouvrage présente les cas les plus significatifs dont l’encadrement de la probabilité de rupture par les bornes simples, la méthode Bayésienne appliquée, les chaînes de Markov, les indices de fiabilité de Cornell et de Hasofer-Lind ou l’intégrale indicatrice du dommage et de la simulation de Monte Carlo. Ce volume insiste sur le calcul des incertitudes au sens de la méthode GUM (Guide to the expression of Uncertainty in Measurement) en respectant le vocabulaire international de métrologie. Destiné aux universitaires et aux professionnels, Fiabilité mécanique appliquée se caractérise par son approche pédagogique des méthodes statistiques, structurées autour de cas concrets et illustrées d’applications corrigées et commentées. Ce volume apportera une aide précieuse aux concepteurs et aux décideurs.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
