Download or read book The Innovation Factory written by Gilles Garel and published by CRC Press. This book was released on 2016-03-23 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Innovation Factory takes a fresh look at the fine art of breakthrough innovation. What makes it unique is that it brings together an experienced scholar and a serial entrepreneur who share the same passion for understanding the processes and theories needed to innovate over and over again. The book marries theory with practical examples focusin
Download or read book Innovation and Society written by Françoise Cros and published by John Wiley & Sons. This book was released on 2018-02-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes stock of the state of the question on innovation in a particular area of education and training. But for this it must be noted that economists have appropriated the notion since Schumpeter and have constrained to think innovation in professions of intervention on others as if they were products to be delivered to the customer as quickly and the best (frugal innovation). Here the author brings a nuance and demonstrates the specificity of innovations in "soft" areas, their richness, while drawing the reader to caution and criticism because any innovation is not good in itself: it can Produce adverse effects in the medium and long term. The author proposes two supports for innovation: on the one hand the approach by its most objective evaluation which itself induces an innovation in its evaluation and, on the other hand, an approach to values and therefore to philosophy of the desired future man. A detour on the history of innovation, on its international approaches, on the imaginary investments it is often the object of (with a nuance of utopia) makes it possible to understand why innovation has been a means To drive the reforms and to convince people for a better future.
Download or read book Creative Rationality and Innovation written by Joelle Forest and published by John Wiley & Sons. This book was released on 2018-01-03 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book urges us to be creative in our way of thinking about innovation. Adopting an artificial perspective, the author emphasizes creative rationality: a form of thought that encourages knowledge crossing and invites an adventurous transgression. The question of how such a form of thought might be developed is addressed through a detailed examination of the educational system. The book frees itself from many of the myths that surround innovation, including the predominance of what the author calls the linear and hierarchical model.
Download or read book The business of time written by Pierre-Yves Donzé and published by Manchester University Press. This book was released on 2022-08-30 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: World watch production today is concentrated in three countries: Switzerland, Japan and China. Former centres such as Great Britain, France, the United States and Russia saw the industrial manufacture of watches disappear from their territory during the twentieth century. How did this situation come about? The business of time aims to answer this question by presenting the first comprehensive history of the sector. It traces the evolution and transformation of the global watch industry from the mid-nineteenth century to the present day, highlighting the conditions that enabled watch production to expand across the globe and revealing how multinational companies gradually emerged to dominate the industry.
Download or read book Science Technology and Innovation Culture written by Marianne Chouteau and published by John Wiley & Sons. This book was released on 2018-10-08 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are facing unprecedented challenges today. For many of us, innovation would be our last hope. But how can it be done? Is it enough to bet on the scientific culture? How can technical culture contribute to innovation? How is technical culture situated with regards to what we name collectively the culture of innovation? It is these questions that this book intends to address.
Download or read book Innovation Capability Maturity Model written by Patrick Corsi and published by John Wiley & Sons. This book was released on 2015-06-15 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whilst innovation remains of course an approach, a process, and is still often even reduced to a set of results, it essentially reflects a way of thinking evolution. Time is up for varying the thinking methods according to capacities and learned and available competencies with a view to change... the thinking level. No domain and no sector is immune to this transformation in todays’ world Having clarified our ideas through this book, we remain ever more convinced that the leveled maturity approach will lead to real advances in innovation over the 2020 years. Hence the competitive capacities of organizations must evolve. As we strive in our quest for new inspiration sources in business, let us reckon that all is bound to evolving... including the way to evolve. In that resides the very capacity to innovate.
Download or read book Management of Extreme Situations written by Pascal Lièvre and published by John Wiley & Sons. This book was released on 2019-09-19 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: In response to the rise of various forms of the extreme in economies, organizations and societies (such as disruptive innovation, climate emergency, financial crisis, high-risk sport, etc.), an ambitious 21st century program sets the agenda of management sciences around the unknown, disruption, uncertainty and risk. Management of Extreme Situations presents the research results from the conference organized at the Cerisy-la-Salle International Cultural Center, France, in 2016. It testifies to the existence of an international community that brings together, around management sciences, various disciplines studying the management concept of extreme situations. Through the analysis of varied contexts (polar and mountain expeditions, fire rescue services, exploration projects in the military field, creative industries, etc.), this book offers an initial grammar of the extreme. It presents a heuristic for the management of these situations – particularly in terms of sensemaking, ambidexterity and knowledge expansion.
Download or read book World Industrialization written by Michel Vigezzi and published by John Wiley & Sons. This book was released on 2020-01-02 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the paradigms of economics and management, inspired by the history of technology and the sociology of technological change, the concepts of shared inventions and competitive innovations make it possible to analyze the industrialization of the world in a fresh and efficient way. As a new approach, shared inventions are classified in this book as a set of existing knowledge thats often associated with the rediscovery of old techniques. Determining capitalized and collective intelligence, this knowledge and reinvention allows us to create inventions which will be shared, first in their construction, then in their use. Another new approach is that these competitive innovations are defined in World Industrialization by associations of experiences of competitively-motivated actors – actors seeking to complement existing techniques by increasing their competitive power. These shared inventions and competitive innovations will also be defined by trajectories identifying their modes of creation, enabling us to overcome the peculiarities of these actions and competitions. This book also highlights four key areas in global industrialization: the emergence of machinism with the defense of Arts and Crafts from 1698–1760; the changes the Industrial Revolution wrought in developed nations from 1760–1850; the link between technology and social relations within modern companies from 1850–1914; and, from 1914 onwards, the birth of extended machinism, its world wars and its global crises.
Download or read book Competitive Quality and Innovation written by Pierre Maillard and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present new quality practices adapted to the specifics of innovation processes in order to increase their chances of success while also facilitating support of the creators who are often put off by the constraints of traditional quality management methods. These practices are applied in businesses of all sizes who do not want to broadcast on this subject as they are at the center of the factors that make them competitive. These quality approaches, which are specific to each innovation process, rest on a common methodological platform that is at the core of this book.
Download or read book From Additive Manufacturing to 3D 4D Printing 1 written by Jean-Claude André and published by John Wiley & Sons. This book was released on 2017-10-30 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1984, additive manufacturing represented a new methodology for manipulating matter, consisting of harnessing materials and/or energy to create three-dimensional physical objects. Today, additive manufacturing technologies represent a market of around 5 billion euros per year, with an annual growth between 20 and 30%. Different processes, materials and dimensions (from nanometer to decameter) within additive manufacturing techniques have led to 70,000 publications on this topic and to several thousand patents with applications as wide-ranging as domestic uses. Volume 1 of this series of books presents these different technologies with illustrative industrial examples. In addition to the strengths of 3D methods, this book also covers their weaknesses and the developments envisaged in terms of incremental innovations to overcome them.
Download or read book Process Engineering Renewal 1 written by Éric Schaer and published by John Wiley & Sons. This book was released on 2020-04-09 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process engineering emerged at the beginning of the 20th Century and has become an essential scientific discipline for the matter and energy processing industries. Its success is incontrovertible, with the exponential increase in techniques and innovations. Rapid advances in new technologies such as artificial intelligence, as well as current societal needs sustainable development, climate change, renewable energy, the environment are developments that must be taken into account in industrial renewal. Process Engineering Renewal 1 the first volume of three focuses on training, demonstrating the need for innovation in order for the field to have a framework that is sustainable, in a highly changeable world.
Download or read book Applied Nanotechnology written by Jeremy Ramsden and published by William Andrew. This book was released on 2018-01-30 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Nanotechnology: The Conversion of Research Results to Products, Third Edition, takes an integrated approach to the scientific, commercial and social aspects of nanotechnology, exploring the relationship between nanotechnology and innovation, the changing economics and business models required to commercialize innovations in nanotechnology, and product design challenges that are investigated through case studies. Applications in various sectors, including composite materials, energy and agriculture are included, as is a section on the role of the government in promoting nanotechnology. In addition, the potential future of molecular self-assembly in industrial production is discussed, along with the ethics and social implications of nanotechnology. This new edition begins a concise introduction to nanotechnology, carefully explaining the relationships between science, technology, wealth and innovation. Next, it focuses on actual products and processes, including the big three areas of application, health, IT and energy. Different types of nanobusiness (upstream, downstream, ancillary etc.), are also carefully delineated, and aspects such as design and realization (e.g., actual fabrication) are also covered, amongst other timely topics. This book offers a vision of the role of nanotechnology in confronting the challenges facing humanity, from healthcare to climate change. Written by an author who has direct, hands-on experience working in a large nanotechnology-based company, in academia as a professor and chair of nanotechnology, and as the co-owner and director of a nanotechnology-based start-up Presents comprehensive coverage in an integrated fashion, not wasting space on trivial details that, if not already known to the reader, can be readily found in generic sources Thoroughly revised, reflecting advances in the field Includes areas that have been expanded into nanotechnology, such as health, and the safety of nano products and processes
Download or read book Training Engineers for Innovation written by Denis Lemaître and published by John Wiley & Sons. This book was released on 2018-12-18 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout history, engineers have been defined as those who bring technological innovation to society. However, the concept of innovation and the role of the engineer are now changing as a result of globalization, the digital revolution, growing inequalities and environmental concerns. Training Engineers for Innovation therefore analyzes the ways in which the educational systems for engineers are adapting to these new demands, as well as the conditions in which this training has developed. This book brings together the works of a consortium of researchers dedicated to the subject area as part of the Innov’Ing 2020 project. Its contributors present various means to devise effective pedagogies adapted to a holistic approach to innovation which incorporates the technical, economic, social, ethical and environmental dimensions of engineering.
Download or read book Handbook on Alternative Theories of Innovation written by Godin, Benoît and published by Edward Elgar Publishing. This book was released on 2021-10-12 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This insightful Handbook scrutinizes alternative concepts and approaches to the dominant economic or industrial theories of innovation. Providing an assessment of these alternatives, it questions the absence of these neglected types of innovation and suggests diverse theories.
Download or read book Going Past Limits To Growth written by Patrick Corsi and published by John Wiley & Sons. This book was released on 2017-07-17 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Growth is a dominant economic driver accounting for the wealth of nations and organizations alike. However, in the face of environmental pressures, widespread social and economic imbalance, and the reigning climate of uncertainty we are experiencing today, there is now a need for a viable interpretation of what growth really means. In this book, the author redefines the limits to economic growth and tackles the issues involved in three parts, in order to study a variety of international issues, including the world economic system, climate change and environmental degradation.
Download or read book From Additive Manufacturing to 3D 4D Printing 2 written by Jean-Claude André and published by John Wiley & Sons. This book was released on 2017-10-30 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing, which was first invented in France and then applied in the United States, is now 33 years old and represents a market of around 5 billion euros per year, with annual growth of between 20 and 30%. Today, additive manufacturing is experiencing a great amount of innovation in its processes, software, engineering and materials used. Its strength as a process has more recently allowed for the exploration of new niches, ranging from applications at nanometer and decameter scales, to others in mechanics and health. As a result, the limitations of the process have also begun to emerge, which include the quality of the tools, their cost of manufacture, the multi-material aspects, functionalities and surface conditions. Volume 2 of this series presents the current techniques, improvements and limits of additive manufacturing, providing an up-to-date review of this process.
