Download or read book La ciencia e ingenier a de los materiales written by Donald R. Askeland and published by . This book was released on 1987 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pectins written by and published by BoD – Books on Demand. This book was released on 2020-01-22 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deepens the study and knowledge on pectins, especially in the processes of extraction, purification, and characterization, in short its many and wide applications. Among the most prominent applications are the food, pharmaceutical, and other industries. The development of pectins has a very promising future with a marked annual increase and with a wide range of sources. As written above, this book will help its readers to expand their knowledge on this biopolymer with vast application in the industry worldwide.
Download or read book Structural Materials written by José Antonio Pero-Sanz Elorz and published by Springer Nature. This book was released on 2019-09-25 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the most important materials (naturals, metals, ceramics, polymers and composites) to be used mainly as structural engineering materials. Their main applications based on the properties are described in the first chapters of the book: mechanical, physical and chemical. The second part of the book is dedicated to the conceptual design by properties for a certain structural application: stiffness, mechanical strength, toughness, fatigue resistance, creep, etc., taking into account the weight and the cost. One of the chapters of the second part of the book is focused on the heat treatments of steels in order to improve their resistance to fatigue. The book concludes with a critical comparison between materials considering their production, properties and cost, and the forecast about the utilization of the different fields of materials in structural applications.
Download or read book Proceedings of the International Conference on Information Technology Systems ICITS 2018 written by Álvaro Rocha and published by Springer. This book was released on 2018-01-04 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes a selection of articles from the 2018 International Conference on Information Technology & Systems (ICITS 18), held on January 10 – 12, 2018, at the Universidad Estatal Península de Santa Elena, Libertad City, Ecuador. ICIST is a global forum for researchers and practitioners to present and discuss recent findings and innovations, current trends, lessons learned and the challenges of modern information technology and systems research, together with their technological development and applications. The main topics covered include information and knowledge management; organizational models and information systems; software and systems modeling; software systems, architectures, applications and tools; multimedia systems and applications; computer networks, mobility and pervasive systems; intelligent and decision support systems; big data analytics and applications; human–computer interaction; ethics, computers & security; health informatics; and information technologies in education.
Download or read book Nanohybrids written by Gaurav Sharma and published by Materials Research Forum LLC. This book was released on 2021-01-20 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers preparation, designing and utilization of nanohybrid materials for biomedical applications. These materials can improve the effectiveness of drugs, promote high cell growth in new scaffolds, and lead to biodegradable surgical sutures. The use of hybrid magneto-plasmonic nanoparticles may lead to non-invasive therapies. The most promising materials are based on silica nanostructures, polymers, bioresorbable metals, liposomes, biopolymeric electrospun nanofibers, graphene, and gelatin. Much research focuses on the development of biomaterials for cell regeneration and wound healing applications. Keywords: Biomedical Materials, Cell Growth, Cell Regeneration, Wound Healing, Surgical Sutures, Non-invasive Therapies , Drug Transport, Tissue Engineering, Cardiovascular Implants, Fracture Repair Implants, Biodegradable Materials, Hybrid Magneto-plasmonic Nanoparticles, Silica Nanostructures, Polymers, Bioresorbable Metals, Liposomes, Biopolymeric Electrospun Nanofibers, Graphene, Gelatin-based Hydrogels.
Download or read book 15th Wear of Materials written by Peter J. Blau and published by Elsevier. This book was released on 2005-10-03 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the 15th International Conference on Wear of Materials focus on the friction and wear of materials in various applications under different environments from the nanometer scale to the meter scale. The conference provides a unique international forum for researchers and practitioners from different disciplines to exchange latest results. Coverage includes: . Wear assessment and monitoring . Wear modeling, mechanisms, mapping and prediction . Wear-corrosion testing and control . Surface engineering for wear and wear-corrosion control . Development of new wear test methods and wear test methodologies . Wear of materials for biomedical applications . Wear of non-equilibrium materials: from atomic dimensions to the micro-scale . Wear of hard and superhard materials . Wear of materials in the earthmoving, minerals processing and mining industries
Download or read book Structural Nanocomposites written by James Njuguna and published by Springer Science & Business Media. This book was released on 2013-11-29 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancements in the nanotechnology industry promise to offer improvements in capabilities across a spectrum of applications. This is of immense strategic importance to the high performance sector which has historically leveraged technological advances. The use of polymer nanocomposites in structures have several predictable impacts on structural design and applications, primarily by providing a safer, faster, and eventually cheaper transportation in the future. This books comprises reviews on the state-of-the-art, new research results, perspectives of future developments, and innovative applications relevant to structural materials, engineering structures, nanocomposites, modelling and simulations, and their related application areas.
Download or read book The Sol Gel Handbook 3 Volume Set written by David Levy and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 1604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.
Download or read book Estrategia Tecnol Gica Sustentable para Deshidratar Frutas Verduras y Legumbres written by Jos V. Ctor Galaviz and published by Palibrio. This book was released on 2012-07 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Debido a que los resultados del análisis de uniformidad de temperatura del deshidratador convencional no fueron los óptimos, se procedió a diseñar y construir un nueva deshidratador con materiales refractarios con la finalidad de uniformizar la temperatura y mejorar los tiempos de proceso. Los materiales refractarios que se utilizaron fueron el vidrio blanco de 6 mm de espesor y una cama de poliuretano (10cm), debido a su bajo coeficiente de conductividad térmica. Se realizó un análisis estadístico en una prueba ANOVA a un nivel de significancia de 0.5%, donde se hizo una comparación de las medias muéstrales y una comparación de las varianzas de cada uno de los tratamientos, el cual se encontró que la construcción del nuevo deshidratador con materiales refractarios tuvo un comportamiento de uniformidad en las temperaturas a un 95% de confianza. Cabe destacar que la temperatura promedio del deshidratador convencional fue de 38.61°C, mientras que con el nuevo deshidratador construido con materiales refractarios se logró incrementar a 57.43°C, destacando que esta temperatura se logró uniformizar en las tres áreas analizadas del deshidratador. Esto significó un incremento de temperatura con respecto al deshidratador solar convencional de un 48.74%
Download or read book Transparent Conductive Materials written by David Levy and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by well-known pioneers in the field, this handbook and ready reference provides a comprehensive overview of transparent conductive materials with a strong application focus. Following an introduction to the materials and recent developments, subsequent chapters discuss the synthesis and characterization as well as the deposition techniques that are commonly used for energy harvesting and light emitting applications. Finally, the book concludes with a look at future technological advances. All-encompassing and up-to-date, this interdisciplinary text runs the gamut from chemistry and materials science to engineering, from academia to industry, and from fundamental challenges to readily available applications.
Download or read book Wear of Materials written by Peter J. Blau and published by Elsevier. This book was released on 2003-10 with total page 1540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Conference on Wear of Materials took place in Washington, DC, USA, 30 March - 3 April 2003. These proceedings contain over two-hundred peer reviewed papers containing the best research, technical developments and engineering case studies from around the world. Biomaterials and nano-tribology receive special attention in this collection reflecting the general trends in the field. Further highlights include a focus on the new generation of instrumentation to probe wear at increasingly small scales. Approximately ninety communications and case studies, a popular format for the academic community have also been included, enabling the inclusion of the most up-to-date research. Over 200 peer-reviewed papers including hot topics such as biomaterials and nano-tribology Keeping you up-to-date with the latest research from leading experts Includes communications and case studies
Download or read book New Materials for a Circular Economy written by Alberto García-Peñas and published by Materials Research Forum LLC. This book was released on 2023-09-01 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: A circular and environment-friendly economy could displace the linear economy as it is in use around the world. This would involve enlarged life cycles for products, and an increase in the efficiency of electric and electronic devices. The generation of new materials will be essential, as well as materials recycling or conversion after use. This book discusses new ways of production, management, recycling and conversion of new and regular materials. Keywords: Microplastics, Lignocellulose-Based Materials, Food Packaging, Biorefinery, Solar Energy, Reused Materials, Recycling of Plastics, Biopolymers, Composites, Polymeric Systems, CO2 Capture, Anticorrosive Polymeric Coatings, Metallic Structures, Scrap for New Steel, Nanomaterials, Waste from Electronic Components, Future of Cars, Raw Materials, Biomaterials, Bioeconomy, Circular Bioeconomy, Polymeric Electrolytes, Fuel Cells.
Download or read book Recent Developments in Mass Transport and Related Phenomena in Materials written by Andreas Öchsner and published by Trans Tech Publications Ltd. This book was released on 2017-02-23 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only
Download or read book Enhancing Cleanup of Environmental Pollutants written by Naser A. Anjum and published by Springer. This book was released on 2017-05-10 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume work is an effort to provide a common platform to environmental engineers, microbiologists, chemical scientists, plant physiologists and molecular biologists working with a common aim of sustainable solutions to varied environmental contamination issues. Chapters explore biological and non-biological strategies to minimize environmental pollution. Highly readable entries attempt to close the knowledge gap between plant - microbial associations and environmental remediation. Volume 1 focuses on important concepts such as biological remediation strategies to enhance soil quality at contaminated sites; synergistic influences of tolerant plants and rhizospheric microbial strains on the remediation of pesticide contaminated soil, and the role of plant types such as hyperaccumulator plants in the cleanup of polluted soils. Readers will discover mechanisms and underlying natural inherent traits of various plants and microbes for tolerating, excluding, remediating, accumulating, or metabolizing a variety of pollutants.
Download or read book Operations and Basic Processes in Steelmaking written by Luis Felipe Verdeja González and published by Springer Nature. This book was released on 2021-03-24 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the operations and industrial processes related to the production of steel. The chapters cover the second part of the iron and steelmaking process, called steelmaking, presenting the stages of the process until obtaining the finished steel product in different formats for distinct applications. This book reports significant operating variables of the processes and basic operations of the steelmaking. The chapters contain numerous solved exercises conceptually supported on the thermodynamic and kinetic fundamentals of the production of steel from the pig iron in the Basic Oxygen Furnace (BOF) and the production of steel and ferroalloys in Electric Arc Furnaces (EAF). The thermal and mechanic fundamentals of the hot rolling operations and the mechanical fundamentals of the cold rolling, forming, and wire drawing to obtain different steel products are also reported. The book summarizes the strengths and uncertainties of steel as a structural material.
Download or read book Biodegradable Polymers written by Margarita del Rosario Salazar and published by CRC Press. This book was released on 2023-03-16 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic concepts on biodegradable biopolymer science are presented in this book, as well as techniques, analyses, standards, and essential criteria for the characterization of biodegradable materials obtained from biopolymers. The development and innovation of products and processes considering the environment are highlighted in this book. All of the applications described have been discussed from the point of view of sustainability. Additionally, this book highlights that biodegradability is a great burden when trying to replace, modify, and/or design existing products, and processes that are highly polluting. Finally, the present book concludes with reflections on the development of biopolymers in different areas, and some of their consequences depending on their biodegradability.
Download or read book The Sol Gel Handbook written by David Levy and published by John Wiley & Sons. This book was released on 2015-08-28 with total page 1616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.
