Download or read book L2 Gain and Passivity Techniques in Nonlinear Control written by Arjan van der Schaft and published by Springer. This book was released on 2016-12-04 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard text gives a unified treatment of passivity and L2-gain theory for nonlinear state space systems, preceded by a compact treatment of classical passivity and small-gain theorems for nonlinear input-output maps. The synthesis between passivity and L2-gain theory is provided by the theory of dissipative systems. Specifically, the small-gain and passivity theorems and their implications for nonlinear stability and stabilization are discussed from this standpoint. The connection between L2-gain and passivity via scattering is detailed. Feedback equivalence to a passive system and resulting stabilization strategies are discussed. The passivity concepts are enriched by a generalised Hamiltonian formalism, emphasising the close relations with physical modeling and control by interconnection, and leading to novel control methodologies going beyond passivity. The potential of L2-gain techniques in nonlinear control, including a theory of all-pass factorizations of nonlinear systems, and of parametrization of stabilizing controllers, is demonstrated. The nonlinear H-infinity optimal control problem is also treated and the book concludes with a geometric analysis of the solution sets of Hamilton-Jacobi inequalities and their relation with Riccati inequalities for the linearization. · L2-Gain and Passivity Techniques in Nonlinear Control (third edition) is thoroughly updated, revised, reorganized and expanded. Among the changes, readers will find: · updated and extended coverage of dissipative systems theory · substantial new material regarding converse passivity theorems and incremental/shifted passivity · coverage of recent developments on networks of passive systems with examples · a completely overhauled and succinct introduction to modeling and control of port-Hamiltonian systems, followed by an exposition of port-Hamiltonian formulation of physical network dynamics · updated treatment of all-pass factorization of nonlinear systems The book provides graduate students and researchers in systems and control with a compact presentation of a fundamental and rapidly developing area of nonlinear control theory, illustrated by a broad range of relevant examples stemming from different application areas.

Download or read book L2 Gain and Passivity Techniques in Nonlinear Control written by and published by . This book was released on 1996 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book L2 gain and Passivity Techniques in Nonlinear Control written by A. J. van der Schaft and published by . This book was released on 1996 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of these lecture notes is to provide a synthesis between classical input-output and closed-loop stability theory, in particular the small-gain and passivity theorems, and recent work on nonlinear H( and passivity-based control. The treatment of the theory of dissipative systems is the main aspect of these lecture notes. Fundamentals of passivity techniques are summarised, and it is shown that the passivity properties of different classes of physical systems can be unified within a generalised Hamiltonian framework. Key developments in linear robust control theory are extended to the nonlinear context using L2-gain techniques. An extensive treatment of nonlinear H( control theory is presented, emphasising its main structural features. Since the application of L2-gain techniques relies on solving Hamilton-Jacobi inequalities the structure of their solution sets and conditions for solvability are derived.

Download or read book PID Passivity Based Control of Nonlinear Systems with Applications written by Romeo Ortega and published by John Wiley & Sons. This book was released on 2021-09-15 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the foundational and advanced subjects associated with proportional-integral-derivative controllers from leading authors in the field In PID Passivity-Based Control of Nonlinear Systems with Applications, expert researchers and authors Drs. Romeo Ortega, Jose Guadalupe Romero, Pablo Borja, and Alejandro Donaire deliver a comprehensive and detailed discussion of the most crucial and relevant concepts in the analysis and design of proportional-integral-derivative controllers using passivity techniques. The accomplished authors present a formal treatment of the recent research in the area and offer readers practical applications of the developed methods to physical systems, including electrical, mechanical, electromechanical, power electronics, and process control. The book offers the material with minimal mathematical background, making it relevant to a wide audience. Familiarity with the theoretical tools reported in the control systems literature is not necessary to understand the concepts contained within. You’ll learn about a wide range of concepts, including disturbance rejection via PID control, PID control of mechanical systems, and Lyapunov stability of PID controllers. Readers will also benefit from the inclusion of: A thorough introduction to a class of physical systems described in the port-Hamiltonian form and a presentation of the systematic procedures to design PID-PBC for them An exploration of the applications to electrical, electromechanical, and process control systems of Lyapunov stability of PID controllers Practical discussions of the regulation and tracking of bilinear systems via PID control and their application to power electronics and thermal process control A concise treatment of the characterization of passive outputs, incremental models, and Port Hamiltonian and Euler-Lagrange systems Perfect for senior undergraduate and graduate students studying control systems, PID Passivity-Based Control will also earn a place in the libraries of engineers who practice in this area and seek a one-stop and fully updated reference on the subject.

Download or read book Nonlinear Control of Vehicles and Robots written by Béla Lantos and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Control of Vehicles and Robots develops a unified approach to the dynamic modeling of robots in terrestrial, aerial and marine environments. The main classes of nonlinear systems and stability methods are summarized and basic nonlinear control methods, useful in manipulator and vehicle control, are presented. Formation control of ground robots and ships is discussed. The book also deals with the modeling and control of robotic systems in the presence of non-smooth nonlinearities. Robust adaptive tracking control of robotic systems with unknown payload and friction in the presence of uncertainties is treated. Theoretical and practical aspects of the control algorithms under discussion are detailed. Examples are included throughout the book allowing the reader to apply the control and modeling techniques in their own research and development work. Some of these examples demonstrate state estimation based on the use of advanced sensors as part of the control system.

Download or read book Lagrangian and Hamiltonian Methods for Nonlinear Control 2003 written by A Astolfi and published by Elsevier. This book was released on 2003-10-07 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second of a series of IFAC Workshops initiated in 2000. The first one chaired and organized by Profs. N. Leonard and R. Ortega, was held in Princeton in March 2000. This proceedings volume looks at the role-played by Lagrangian and Hamiltonian methods in disciplines such as classical mechanics, quantum mechanics, fluid dynamics, electrodynamics, celestial mechanics and how such methods can be practically applied in the control community. *Presents and illustrates new approaches to nonlinear control that exploit the Lagrangian and Hamiltonian structure of the system to be controlled *Highlights the important role of Lagrangian and Hamiltonian Structures as design methods

Download or read book Nonlinear and Adaptive Control with Applications written by Alessandro Astolfi and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors here provide a detailed treatment of the design of robust adaptive controllers for nonlinear systems with uncertainties. They employ a new tool based on the ideas of system immersion and manifold invariance. New algorithms are delivered for the construction of robust asymptotically-stabilizing and adaptive control laws for nonlinear systems. The methods proposed lead to modular schemes that are easier to tune than their counterparts obtained from Lyapunov redesign.

Download or read book Computer aided Nonlinear Control System Design written by Amir Nassirharand and published by Springer Science & Business Media. This book was released on 2012-01-02 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic computer-aided approach provides a versatile setting for the control engineer to overcome the complications of controller design for highly nonlinear systems. Computer-aided Nonlinear Control System Design provides such an approach based on the use of describing functions. The text deals with a large class of nonlinear systems without restrictions on the system order, the number of inputs and/or outputs or the number, type or arrangement of nonlinear terms. The strongly software-oriented methods detailed facilitate fulfillment of tight performance requirements and help the designer to think in purely nonlinear terms, avoiding the expedient of linearization which can impose substantial and unrealistic model limitations and drive up the cost of the final product. Design procedures are presented in a step-by-step algorithmic format each step being a functional unit with outputs that drive the other steps. This procedure may be easily implemented on a digital computer with example problems from mechatronic and aerospace design being used to demonstrate the techniques discussed. The author’s commercial MATLAB®-based environment, available separately from insert URL here, can be used to create simulations showing the results of using the computer-aided control system design ideas characterized in the text. Academic researchers and graduate students studying nonlinear control systems and control engineers dealing with nonlinear plant, particularly mechatronic or aerospace systems will find Computer-aided Nonlinear Control System Design to be of great practical assistance adding to their toolbox of techniques for dealing with system nonlinearities. A basic knowledge of calculus, nonlinear analysis and software engineering will enable the reader to get the best from this book.

Download or read book Nonlinear Control Systems written by Alberto Isidori and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to present a self-contained description of the fun damentals of the theory of nonlinear control systems, with special emphasis on the differential geometric approach. The book is intended as a graduate text as weil as a reference to scientists and engineers involved in the analysis and design of feedback systems. The first version of this book was written in 1983, while I was teach ing at the Department of Systems Science and Mathematics at Washington University in St. Louis. This new edition integrates my subsequent teaching experience gained at the University of Illinois in Urbana-Champaign in 1987, at the Carl-Cranz Gesellschaft in Oberpfaffenhofen in 1987, at the University of California in Berkeley in 1988. In addition to a major rearrangement of the last two Chapters of the first version, this new edition incorporates two additional Chapters at a more elementary level and an exposition of some relevant research findings which have occurred since 1985.

Download or read book Nonlinear Dynamical Control Systems written by Henk Nijmeijer and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with controllability and observability properties of nonlinear systems, as well as various ways to obtain input-output representations. The emphasis is on fundamental notions as (controlled) invariant distributions and submanifolds, together with algorithms to compute the required feedbacks.

Download or read book Passivity based Control of Euler Lagrange Systems written by Romeo Ortega and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essence of this work is the control of electromechanical systems, such as manipulators, electric machines, and power converters. The common thread that links together the results presented here is the passivity property, which is at present in numerous electrical and mechanical systems, and which has great relevance in control engineering at this time. Amongst other topics, the authors cover: Euler-Lagrange Systems, Mechanical Systems, Generalised AC Motors, Induction Motor Control, Robots with AC Drives, and Perspectives and Open Problems. The authors have extensive experience of research and application in the field of control of electromechanical systems, which they have summarised here in this self-contained volume. While written in a strictly mathematical way, it is also elementary, and will be accessible to a wide-ranging audience, including graduate students as well as practitioners and researchers in this field.

Download or read book Nonlinear Model Predictive Control written by Lars Grüne and published by Springer. This book was released on 2016-11-09 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers readers a thorough and rigorous introduction to nonlinear model predictive control (NMPC) for discrete-time and sampled-data systems. NMPC schemes with and without stabilizing terminal constraints are detailed, and intuitive examples illustrate the performance of different NMPC variants. NMPC is interpreted as an approximation of infinite-horizon optimal control so that important properties like closed-loop stability, inverse optimality and suboptimality can be derived in a uniform manner. These results are complemented by discussions of feasibility and robustness. An introduction to nonlinear optimal control algorithms yields essential insights into how the nonlinear optimization routine—the core of any nonlinear model predictive controller—works. Accompanying software in MATLAB® and C++ (downloadable from extras.springer.com/), together with an explanatory appendix in the book itself, enables readers to perform computer experiments exploring the possibilities and limitations of NMPC. The second edition has been substantially rewritten, edited and updated to reflect the significant advances that have been made since the publication of its predecessor, including: • a new chapter on economic NMPC relaxing the assumption that the running cost penalizes the distance to a pre-defined equilibrium; • a new chapter on distributed NMPC discussing methods which facilitate the control of large-scale systems by splitting up the optimization into smaller subproblems; • an extended discussion of stability and performance using approximate updates rather than full optimization; • replacement of the pivotal sufficient condition for stability without stabilizing terminal conditions with a weaker alternative and inclusion of an alternative and much simpler proof in the analysis; and • further variations and extensions in response to suggestions from readers of the first edition. Though primarily aimed at academic researchers and practitioners working in control and optimization, the text is self-contained, featuring background material on infinite-horizon optimal control and Lyapunov stability theory that also makes it accessible for graduate students in control engineering and applied mathematics.

Download or read book Control Theory for Linear Systems written by Harry L. Trentelman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Theory for Linear Systems deals with the mathematical theory of feedback control of linear systems. It treats a wide range of control synthesis problems for linear state space systems with inputs and outputs. The book provides a treatment of these problems using state space methods, often with a geometric flavour. Its subject matter ranges from controllability and observability, stabilization, disturbance decoupling, and tracking and regulation, to linear quadratic regulation, H2 and H-infinity control, and robust stabilization. Each chapter of the book contains a series of exercises, intended to increase the reader's understanding of the material. Often, these exercises generalize and extend the material treated in the regular text.

Download or read book Genetic Algorithms for Control and Signal Processing written by Kim F. Man and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology impacts all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies, . . . , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. The emerging technologies in control include fuzzy logic, intelligent control, neural networks and hardware developments like micro-electro-mechanical systems and autonomous vehicles. This volume describes the biological background, basic construction and application of the emerging technology of Genetic Algorithms. Dr Kim Man and his colleagues have written a book which is both a primer introducing the basic concepts and a research text which describes some of the more advanced applications of the genetic algorithmic method. The applications described are especially useful since they indicate the power of the GA method in solving a wide range of problems. These sections are also instructive in showing how the mechanics of the GA solutions are obtained thereby acting as a template for similar types of problems. The volume is a very welcome contribution to the Advances in Industrial Control Series. M. J. Grimble and M. A.

Download or read book Dynamical Systems and Control written by Firdaus E. Udwadia and published by CRC Press. This book was released on 2004-05-10 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 11th International Workshop on Dynamics and Control brought together scientists and engineers from diverse fields and gave them a venue to develop a greater understanding of this discipline and how it relates to many areas in science, engineering, economics, and biology. The event gave researchers an opportunity to investigate ideas and techniq

Download or read book Model based Nonlinear Control of Aeroengines written by Jiqiang Wang and published by Springer Nature. This book was released on 2021-08-17 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to develop systematic design methodologies to model-based nonlinear control of aeroengines, focusing on (1) modelling of aeroengine systems—both component-level and identification-based models will be extensively studied and compared; and (2) advanced nonlinear control designs—set-point control, transient control and limit-protection control approaches will all be investigated. The model-based design has been one of the pivotal technologies to advanced control and health management of propulsion systems. It can fulfil advanced designs such as fault-tolerant control, engine modes control and direct thrust control. As a consequence, model-based design has become an important research area in the field of aeroengines due to its theoretical interests and engineering significance. One of the central issues in model-based controls is the tackling of nonlinearities. There are publications concerning with either nonlinear modelling or nonlinear controls; yet, they are scattered throughout the literature. It is time to provide a comprehensive summary of model-based nonlinear controls. Consequently, a series of important results are obtained and a systematic design methodology is developed which provides consistently enhanced performance over a large flight/operational envelope, and it is thus expected to provide useful guidance to practical engineering in aeroengine industry and research.

Download or read book Lagrangian and Hamiltonian Methods For Nonlinear Control 2006 written by Francesco Bullo and published by Springer. This book was released on 2007-10-06 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: