Download or read book Knowledge based Manufacturing Management written by Roger Kerr and published by Addison Wesley Publishing Company. This book was released on 1991 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Knowledge Based Production Management Systems written by Jim Browne and published by North Holland. This book was released on 1989 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, artificial intelligence (AI) methods have been applied to production management systems (PMS), particularly in the area of scheduling. Included in this book is a review of research and applications as well as a presentation of new results. There is a mix of papers from industry, research laboratories and academia which gives a realistic perspective on the prospects for AI technology in PMS applications. The majority of papers are concerned with the use of knowledge based techniques to solve various scheduling problems. The introductory section includes two overview papers, each presenting the views and expectations of researchers in major industrial companies who have some experience of using AI technology to solve production management problems. There follows a series of technical papers which have been grouped into five categories: Model Based and Simulation Approaches; AI and Scheduling; AI and Production Planning; The GRAI Method; AI Applications and FMS.
Download or read book Advances in Production Management Systems Innovative and Knowledge Based Production Management in a Global Local World written by Bernard Grabot and published by Springer. This book was released on 2014-08-26 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volumes IFIP AICT 438, 439, and 440 constitute the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2014, held in Ajaccio, France, in September 2014. The 233 revised full papers were carefully reviewed and selected from 271 submissions. They are organized in 6 parts: knowledge discovery and sharing; knowledge-based planning and scheduling; knowledge-based sustainability; knowledge-based services; knowledge-based performance improvement, and case studies.
Download or read book Advances in Production Management Systems Production Management for Data Driven Intelligent Collaborative and Sustainable Manufacturing written by Ilkyeong Moon and published by Springer. This book was released on 2018-08-24 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 535 and 536 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2018, held in Seoul, South Korea, in August 2018. The 129 revised full papers presented were carefully reviewed and selected from 149 submissions. They are organized in the following topical sections: lean and green manufacturing; operations management in engineer-to-order manufacturing; product-service systems, customer-driven innovation and value co-creation; collaborative networks; smart production for mass customization; global supply chain management; knowledge based production planning and control; knowledge based engineering; intelligent diagnostics and maintenance solutions for smart manufacturing; service engineering based on smart manufacturing capabilities; smart city interoperability and cross-platform implementation; manufacturing performance management in smart factories; industry 4.0 - digital twin; industry 4.0 - smart factory; and industry 4.0 - collaborative cyber-physical production and human systems.
Download or read book Advances in Production Management Systems Smart Manufacturing for Industry 4 0 written by Ilkyeong Moon and published by Springer. This book was released on 2018-08-24 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 535 and 536 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2018, held in Seoul, South Korea, in August 2018. The 129 revised full papers presented were carefully reviewed and selected from 149 submissions. They are organized in the following topical sections: lean and green manufacturing; operations management in engineer-to-order manufacturing; product-service systems, customer-driven innovation and value co-creation; collaborative networks; smart production for mass customization; global supply chain management; knowledge based production planning and control; knowledge based engineering; intelligent diagnostics and maintenance solutions for smart manufacturing; service engineering based on smart manufacturing capabilities; smart city interoperability and cross-platform implementation; manufacturing performance management in smart factories; industry 4.0 - digital twin; industry 4.0 - smart factory; and industry 4.0 - collaborative cyber-physical production and human systems.
Download or read book Knowledge Based Production Management Systems written by Jim Browne and published by North Holland. This book was released on 1989 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, artificial intelligence (AI) methods have been applied to production management systems (PMS), particularly in the area of scheduling. Included in this book is a review of research and applications as well as a presentation of new results. There is a mix of papers from industry, research laboratories and academia which gives a realistic perspective on the prospects for AI technology in PMS applications. The majority of papers are concerned with the use of knowledge based techniques to solve various scheduling problems. The introductory section includes two overview papers, each presenting the views and expectations of researchers in major industrial companies who have some experience of using AI technology to solve production management problems. There follows a series of technical papers which have been grouped into five categories: Model Based and Simulation Approaches; AI and Scheduling; AI and Production Planning; The GRAI Method; AI Applications and FMS.
Download or read book Database and Expert Systems Applications written by Dimitris Karagiannis and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Database and Expert Systems Applications - DEXA - conferences are dedi cated to providing an international forum for the presentation of applications in the database and expert systems field, for the exchange of ideas and experiences, and for defining requirements for the future systems in these fields. After the very promising DEXA 90 in Vienna, Austria, we hope to have successfully established wjth this year's DEXA 91 a stage where scientists from diverse fields interested in application-oriented research can present and discuss their work. This year there was a total of more than 250 submitted papers from 28 different countries, in all continents. Only 98 of the papers could be accepted. The collection of papers in these proceedings offers a cross-section of the issues facing the area of databases and expert systems, i.e., topics of basic research interest on one hand and questions occurring when developing applications on the other. Major credit for the success of the conference goes to all of our colleagues who submitted papers for consideration and to those who have organized and chaired the panel sessions. Many persons contributed numerous hours to organize this conference. The names of most of them will appear on the following pages. In particular we wish to thank the Organization Committee Chairmen Johann Gordesch, A Min Tjoa, and Roland Wag ner, who also helped establishing the program. Special thanks also go to Gabriella Wagner and Anke Ruckert. Dimitris Karagiannis General Conference Chairman Contents Conference Committee.
Download or read book Intelligent Knowledge Based Systems written by Cornelius T. Leondes and published by Springer Science & Business Media. This book was released on 2010-04-28 with total page 2041 pages. Available in PDF, EPUB and Kindle. Book excerpt: This five-volume set clearly manifests the great significance of these key technologies for the new economies of the new millennium. The discussions provide a wealth of practical ideas intended to foster innovation in thought and, consequently, in the further development of technology. Together, they comprise a significant and uniquely comprehensive reference source for research workers, practitioners, computer scientists, academics, students, and others on the international scene for years to come.
Download or read book Advances in Production Management Systems Innovative and Knowledge Based Production Management in a Global Local World written by Bernard Grabot and published by Springer. This book was released on 2014-08-26 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volumes IFIP AICT 438, 439, and 440 constitute the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2014, held in Ajaccio, France, in September 2014. The 233 revised full papers were carefully reviewed and selected from 271 submissions. They are organized in 6 parts: knowledge discovery and sharing; knowledge-based planning and scheduling; knowledge-based sustainability; knowledge-based services; knowledge-based performance improvement, and case studies.
Download or read book Knowledge Based Production Management Systems written by Jimmie Browne and published by . This book was released on 1989 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Production Management Systems Innovative and Knowledge Based Production Management in a Global Local World written by Bernard Grabot and published by Springer. This book was released on 2014-08-26 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volumes IFIP AICT 438, 439, and 440 constitute the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2014, held in Ajaccio, France, in September 2014. The 233 revised full papers were carefully reviewed and selected from 271 submissions. They are organized in 6 parts: knowledge discovery and sharing; knowledge-based planning and scheduling; knowledge-based sustainability; knowledge-based services; knowledge-based performance improvement, and case studies.
Download or read book Database and Expert Systems Applications written by Vladimír Mařík and published by Springer. This book was released on 1993 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This volume constitutes the proceedings of the 4th International Conference on Database and Expert Systems Applications (DEXA), held in Prague, Czech Republic, in September 1993. Traditionally the objective of the DEXA conferences is to serve as an international forum for the discussion and exchange of research results and practical experinece among theoreticians and professionals working in the field of database and artificial intelligence technologies. Despite the fact that in the conference title the applications aspect is mentioned explicitly, the theoretical and the practical points of view in the field are well-balanced in the program of DEXA'93. The growing importance of the conference series is outlined by the remarkably high number of 269 submissions and by the support given by renown organizations. DEXA'93 is held for the first time outside the former GDR in an East-European country, and is essentially contributing to the advancement of the East-West scientific cooperation in the field of database and AI systems. This proceedings contains the 78 contributed papers carefully selected by an international program committee with thesupport of a high number of subreferees. The volume is organized in sectionson data models, distributed databases, advanced database aspects, database optimization and performance evaluation, spatial and geographic databases, expert systems and knowledge engineering, legal systems, other database and artificial intelligence applications, software engineering, and hypertext/hypermedia and user interfaces."--PUBLISHER'S WEBSITE
Download or read book Creating Knowledge Based Organizations written by Jatinder N. D. Gupta and published by IGI Global. This book was released on 2004-01-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creating Knowledge Based Organizations brings together high quality concepts and techniques closely related to organizational learning, knowledge workers, intellectual capital, and knowledge management. It includes the methodologies, systems and approaches that are needed to create and manage knowledge based organizations.
Download or read book Methods and Tools for Effective Knowledge Life Cycle Management written by Alain Bernard and published by Springer Science & Business Media. This book was released on 2008-04-01 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge Management is a wide, critical and strategic issue for all the com- nies, from the SMEs to the most complex organizations. The key of competiti- ness is knowledge, because of the necessity of reactivity, flexibility, agility and innovation capacities. Knowledge is difficult to measure itself but what is visible, this is the way of improving products, technologies and enterprise organizations. During the last four years, based on the experience of most of the best experts around the World, CIRP (The International Academy for Production Engineering) has decided to prepare and structure a Network of Excellence (NoE) proposal. The European Community accepted to found the VRL-KCiP (Virtual Research La- ratory – Knowledge Community in Production). As its name indicates it, the aim of this NoE was really to build a «Knowledge Community in Production ». This was possible and realistic because the partners were representative of the most important universities in Europe and also because of strong partnerships with laboratories far from Europe (Japan, Australia, South Africa, USA, etc...). Based on such powerful partnership, the main issue was to help European manufacturing industry to define and structure the strategic knowledge in order to face the strategic worldwide challenges. Manufacturing in Europe currently has two essential aspects: 1. It has to be knowledge intensive given the European demands for high-tech products and services (e.g. electronics, medicines).
Download or read book Advances in Production Management Systems Towards Smart Production Management Systems written by Farhad Ameri and published by Springer Nature. This book was released on 2019-08-23 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 566 and 567 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2019, held in Austin, TX, USA. The 161 revised full papers presented were carefully reviewed and selected from 184 submissions. They discuss globally pressing issues in smart manufacturing, operations management, supply chain management, and Industry 4.0. The papers are organized in the following topical sections: lean production; production management in food supply chains; sustainability and reconfigurability of manufacturing systems; product and asset life cycle management in smart factories of industry 4.0; variety and complexity management in the era of industry 4.0; participatory methods for supporting the career choices in industrial engineering and management education; blockchain in supply chain management; designing and delivering smart services in the digital age; operations management in engineer-to-order manufacturing; the operator 4.0 and the Internet of Things, services and people; intelligent diagnostics and maintenance solutions for smart manufacturing; smart supply networks; production management theory and methodology; data-driven production management; industry 4.0 implementations; smart factory and IIOT; cyber-physical systems; knowledge management in design and manufacturing; collaborative product development; ICT for collaborative manufacturing; collaborative technoloy; applications of machine learning in production management; and collaborative technology.
Download or read book Computer Integrated Manufacturing written by R. Vio and published by Springer. This book was released on 1991-05-27 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference Theme: "Applications of CIM: Critical Success Factors and Implementation Strategies". With the patronage of Ministero della Universita e della Ricerca Scientifica e Tecnologica and Citta di Torino
Download or read book Collaborative Networks and Digital Transformation written by Luis M. Camarinha-Matos and published by Springer Nature. This book was released on 2019-09-12 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 20th IFIP WG 5.5 Working Conference on Virtual Enterprises, PRO-VE 2019, held in Turin, Italy, in September 2019. The 56 revised full papers were carefully reviewed and selected from 141 submissions. They provide a comprehensive overview of major challenges and recent advances in various domains related to the digital transformation and collaborative networks and their applications with a strong focus on the following areas related to the main theme of the conference: collaborative models, platforms and systems for digital revolution; manufacturing ecosystem and collaboration in Industry 4.0; big data analytics and intelligence; risk, performance, and uncertainty in collaborative networked systems; semantic data/service discovery, retrieval, and composition in a collaborative networked world; trust and sustainability analysis in collaborative networks; value creation and social impact of collaborative networks on the digital revolution; technology development platforms supporting collaborative systems; collective intelligence and collaboration in advanced/emerging applications; and collaborative manufacturing and factories of the future, e-health and care, food and agribusiness, and crisis/disaster management.
