Download or read book Knowledge based Optimum Design written by Muthaukumar Balachandran and published by . This book was released on 1996 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multidisciplinary Design Optimization Supported by Knowledge Based Engineering written by Jaroslaw Sobieszczanski-Sobieski and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multidisciplinary Design Optimization supported by Knowledge Based Engineering supports engineers confronting this daunting and new design paradigm. It describes methodology for conducting a system design in a systematic and rigorous manner that supports human creativity to optimize the design objective(s) subject to constraints and uncertainties. The material presented builds on decades of experience in Multidisciplinary Design Optimization (MDO) methods, progress in concurrent computing, and Knowledge Based Engineering (KBE) tools. Key features: Comprehensively covers MDO and is the only book to directly link this with KBE methods Provides a pathway through basic optimization methods to MDO methods Directly links design optimization methods to the massively concurrent computing technology Emphasizes real world engineering design practice in the application of optimization methods Multidisciplinary Design Optimization supported by Knowledge Based Engineering is a one-stop-shop guide to the state-of-the-art tools in the MDO and KBE disciplines for systems design engineers and managers. Graduate or post-graduate students can use it to support their design courses, and researchers or developers of computer-aided design methods will find it useful as a wide-ranging reference.
Download or read book Introduction to Optimum Design written by Jasbir Singh Arora and published by Elsevier. This book was released on 2004-06-02 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization is a mathematical tool developed in the early 1960's used to find the most efficient and feasible solutions to an engineering problem. It can be used to find ideal shapes and physical configurations, ideal structural designs, maximum energy efficiency, and many other desired goals of engineering. This book is intended for use in a first course on engineering design and optimization. Material for the text has evolved over a period of several years and is based on classroom presentations for an undergraduate core course on the principles of design. Virtually any problem for which certain parameters need to be determined to satisfy constraints can be formulated as a design optimization problem. The concepts and methods described in the text are quite general and applicable to all such formulations. Inasmuch, the range of application of the optimum design methodology is almost limitless, constrained only by the imagination and ingenuity of the user. The book describes the basic concepts and techniques with only a few simple applications. Once they are clearly understood, they can be applied to many other advanced applications that are discussed in the text. Allows engineers involved in the design process to adapt optimum design concepts in their work using the material in the text Basic concepts of optimality conditions and numerical methods are described with simple examples, making the material high teachable and learnable Classroom-tested for many years to attain optimum pedagogical effectiveness
Download or read book Introduction to Optimum Design written by Jasbir Singh Arora and published by Academic Press. This book was released on 2011-08-12 with total page 897 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Optimum Design, Third Edition describes an organized approach to engineering design optimization in a rigorous yet simplified manner. It illustrates various concepts and procedures with simple examples and demonstrates their applicability to engineering design problems. Formulation of a design problem as an optimization problem is emphasized and illustrated throughout the text. Excel and MATLAB® are featured as learning and teaching aids. Basic concepts of optimality conditions and numerical methods are described with simple and practical examples, making the material highly teachable and learnable Includes applications of optimization methods for structural, mechanical, aerospace, and industrial engineering problems Introduction to MATLAB Optimization Toolbox Practical design examples introduce students to the use of optimization methods early in the book New example problems throughout the text are enhanced with detailed illustrations Optimum design with Excel Solver has been expanded into a full chapter New chapter on several advanced optimum design topics serves the needs of instructors who teach more advanced courses
Download or read book Introduction to Optimum Design written by Jasbir Singh Arora and published by Elsevier. This book was released on 2024-03-18 with total page 1121 pages. Available in PDF, EPUB and Kindle. Book excerpt: Arora’s Introduction to Optimum Design is the most widely used textbook in engineering optimization and optimum design courses. It is intended for use in a first course on engineering design and optimization at the undergraduate or graduate level within engineering departments of all disciplines, but primarily within mechanical, aerospace and civil engineering. The basic approach of the text is to describe an organized approach to engineering design optimization in a rigorous yet simplified manner, illustrate various concepts and procedures with simple examples, and demonstrate their applicability to engineering design problems. Formulation of a design problem as an optimization problem is emphasized and illustrated throughout the text. Excel and MATLAB are featured as learning and teaching aids. The fifth edition has been enhanced with new or expanded content in such areas as reliability-based optimization, life-cycle optimization of structures, metamodeling, shape and topology optimization, and combinatorial problems. Describes basic concepts of optimality conditions and numerical methods with simple and practical examples, making the material highly teachable and learnable Includes applications of optimization methods for structural, mechanical, aerospace, and industrial engineering problems Covers practical design examples and introduces students to the use of optimization methods Serves the needs of instructors who teach more advanced courses Features new or expanded content in such areas as reliability-based optimization, life-cycle optimization of structures, metamodeling, shape and topology optimization
Download or read book Analysis and Optimum Design of Metal Structures written by J Farkas and published by CRC Press. This book was released on 2020-12-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailing a number of structural analysis problems such as residual welding stresses and distortions and behaviour of thin-walled rods loaded in bending, this text also explores mathematical function minimization methods, expert systems and optimum design of welded box beams.
Download or read book Principles of Optimal Design written by Panos Y. Papalambros and published by Cambridge University Press. This book was released on 2000-07-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Optimal Design puts the concept of optimal design on a rigorous foundation and demonstrates the intimate relationship between the mathematical model that describes a design and the solution methods that optimize it. Since the first edition was published, computers have become ever more powerful, design engineers are tackling more complex systems, and the term optimization is now routinely used to denote a design process with increased speed and quality. This second edition takes account of these developments and brings the original text thoroughly up to date. The book now includes a discussion of trust region and convex approximation algorithms. A new chapter focuses on how to construct optimal design models. Three new case studies illustrate the creation of optimization models. The final chapter on optimization practice has been expanded to include computation of derivatives, interpretation of algorithmic results, and selection of algorithms and software. Both students and practising engineers will find this book a valuable resource for design project work.
Download or read book Computer Aided Optimal Design Structural and Mechanical Systems written by Carlos A. Mota Soares and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the edited version of lectures and selected papers presented at the NATO ADVANCED STUDY INSTITUTE ON COMPUTER AIDED OPTIMAL DESIGN: Structural and Mechanical Systems, held in Tr6ia, Portugal, 29th June to 11th July 1986, and organized by CEMUL -Center of Mechanics and Materials of the Technical University of Lisbon. The Institute was attended by 120 participants from 21 countries, including leading scientists and engineers from universities, research institutions and industry, and Ph.D. students. Some participants presented invited and contributed papers during the Institute and almost all participated actively in discussions on scientific aspects during the Institute. The Advanced Study Institute provided a forum for interaction among eminent scientists and engineers from different schools of thought and young reseachers. The Institute addressed the foundations and current state of the art of essential techniques related to computer aided optimal design of structural and mechanical systems, namely: Vari ational and Finite Element Methods in Optimal Design, Numerical Optimization Techniques, Design Sensitivity Analysis, Shape Optimal Design, Adaptive Finite Element Methods in Shape Optimization, CAD Technology, Software Development Techniques, Integrated Computer Aided Design and Knowledge Based Systems. Special topics of growing importance were also pre sented.
Download or read book Optimal Design of Experiments written by Peter Goos and published by John Wiley & Sons. This book was released on 2011-06-28 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is an engaging and informative book on the modern practice of experimental design. The authors' writing style is entertaining, the consulting dialogs are extremely enjoyable, and the technical material is presented brilliantly but not overwhelmingly. The book is a joy to read. Everyone who practices or teaches DOE should read this book." - Douglas C. Montgomery, Regents Professor, Department of Industrial Engineering, Arizona State University "It's been said: 'Design for the experiment, don't experiment for the design.' This book ably demonstrates this notion by showing how tailor-made, optimal designs can be effectively employed to meet a client's actual needs. It should be required reading for anyone interested in using the design of experiments in industrial settings." —Christopher J. Nachtsheim, Frank A Donaldson Chair in Operations Management, Carlson School of Management, University of Minnesota This book demonstrates the utility of the computer-aided optimal design approach using real industrial examples. These examples address questions such as the following: How can I do screening inexpensively if I have dozens of factors to investigate? What can I do if I have day-to-day variability and I can only perform 3 runs a day? How can I do RSM cost effectively if I have categorical factors? How can I design and analyze experiments when there is a factor that can only be changed a few times over the study? How can I include both ingredients in a mixture and processing factors in the same study? How can I design an experiment if there are many factor combinations that are impossible to run? How can I make sure that a time trend due to warming up of equipment does not affect the conclusions from a study? How can I take into account batch information in when designing experiments involving multiple batches? How can I add runs to a botched experiment to resolve ambiguities? While answering these questions the book also shows how to evaluate and compare designs. This allows researchers to make sensible trade-offs between the cost of experimentation and the amount of information they obtain.
Download or read book Introduction to Optimum Design written by Jasbir Arora and published by Academic Press. This book was released on 2016-04-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Optimum Design, Fourth Edition, carries on the tradition of the most widely used textbook in engineering optimization and optimum design courses. It is intended for use in a first course on engineering design and optimization at the undergraduate or graduate level in engineering departments of all disciplines, with a primary focus on mechanical, aerospace, and civil engineering courses. Through a basic and organized approach, the text describes engineering design optimization in a rigorous, yet simplified manner, illustrates various concepts and procedures with simple examples, and demonstrates their applicability to engineering design problems. Formulation of a design problem as an optimization problem is emphasized and illustrated throughout the text using Excel and MATLAB as learning and teaching aids. This fourth edition has been reorganized, rewritten in parts, and enhanced with new material, making the book even more appealing to instructors regardless of course level.
Download or read book Optimum Experimental Designs With SAS written by Anthony Atkinson and published by OUP Oxford. This book was released on 2007-05-24 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experiments on patients, processes or plants all have random error, making statistical methods essential for their efficient design and analysis. This book presents the theory and methods of optimum experimental design, making them available through the use of SAS programs. Little previous statistical knowledge is assumed. The first part of the book stresses the importance of models in the analysis of data and introduces least squares fitting and simple optimum experimental designs. The second part presents a more detailed discussion of the general theory and of a wide variety of experiments. The book stresses the use of SAS to provide hands-on solutions for the construction of designs in both standard and non-standard situations. The mathematical theory of the designs is developed in parallel with their construction in SAS, so providing motivation for the development of the subject. Many chapters cover self-contained topics drawn from science, engineering and pharmaceutical investigations, such as response surface designs, blocking of experiments, designs for mixture experiments and for nonlinear and generalized linear models. Understanding is aided by the provision of "SAS tasks" after most chapters as well as by more traditional exercises and a fully supported website. The authors are leading experts in key fields and this book is ideal for statisticians and scientists in academia, research and the process and pharmaceutical industries.
Download or read book Optimal Design of Flexible Manufacturing Systems written by Ulrich A.W. Tetzlaff and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible manufacturing systems are complex production systems with considerable high investment costs. This book intends to show the reader how the design of such a system can be optimized. Thereby it addresses the academic world in management science and industrial engineering as well as system planners in industry. First the design problems are analysed in detail and a planning concept is presented. Afterwards possible tools for the design process are described, as there are: mathematical programming, queueing networks, computer simulation, perturbation analysis, petri nets, group technology, and knowledge based systems. The major part of the book, however, concerns the description of existing optimization models based on mathematical programming. Each model is explained and discussed in detail and for new models, developed by the author, numerical examples are given. Finally some distinct guidelines are presented which help the system planners to select the appropriate model for their planning problems.
Download or read book Fundamentals of Optimum Design in Engineering written by S. S. Bhavikatti and published by . This book was released on 2012-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a self-contained exposition to the subject of design optimization. Facilitates the use of optimization techniques for different problems. Basic concepts of optimality conditions and numerical methods are described with simple and practical examples. Emphasis is given on producing economical design using optimization software.
Download or read book Advances in Design Optimization written by H. Adeli and published by CRC Press. This book was released on 2002-09-11 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes advances in a number of fundamental areas of optimization with application in engineering design. The selection of the 'best' or 'optimum' design has long been a major concern of designers and in recent years interest has grown in applying mathematical optimization techniques to design of large engineering and industrial systems, and in using the computer-aided design packages with optimization capabilities which are now available.
Download or read book Discretization Methods and Structural Optimization Procedures and Applications written by Hans A. Eschenauer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the Finite Element Methods FEM were more and more employed in development and design departments as very fast working tools in order to determine stresses, deformations, eigenfrequencies etc. for all kinds of constructions under complex loading conditions. Meanwhile. very effective software systems have been developed by various research teams although some mathematical problems (e. g. convergence) have not been solved satisfac torily yet. In order to make further advances and to find a common language between mathe maticians and mechanicians the "Society for Applied Mathematics and Mechanics" (GAMM) agreed on the foundation of a special Committee: "Discretization Methods in Solid Mechanics" focussing on the following problems: - Structuring of various methods (displacement functions, hybrid and mixed approaches, etc. >, - Survey of approach functions (Lagrange-/Hermite-polynominals, Spline-functions), - Description of singularities, - Convergence and stability, - Practical and theoretical optimality to all mentioned issues (single and interacting). One of the basic aims of the GAMM-Committee is the interdisciplinary cooperation between mechanicians, mathematicians, and users which shall be intensified. Thus, on September 22, 1985 the committee decided to hold a seminar on "Structural Optimization" in order to allow an exchange of experiences and thoughts between the experts of finite element methods and those of structural optimization. A GAMM-seminar entitled "Discretization Methods and Structural Optimization - Procedures and Applications" was hold on October 5-7, 1988 at the Unversity of Siegen.
Download or read book Visible Knowledge for Flawless Design written by Allen C. Ward and published by Taylor & Francis. This book was released on 2018-04-17 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Visible knowledge is a tool nearly lost in the West, but it has been used to great effect by Toyota in its 50-year march from noncompetitiveness to its current status as the second largest automobile company in the world. It is key for the 50% growth in market share Toyota plans for this decade despite worldwide overcapacity in the auto business. This book presents the reader with a systematic approach to create, capture, and display knowledge in a way that allows development teams to optimize the design of their products and production processes. Visible knowledge not only applies to knowledge management, but provides a means of collaboration to facilitate better decision-making in the development process. This book has evolved out of a manuscript that Allen Ward, the foremost U.S. expert on lean product development, was writing at the time of his untimely death. It is not intended to be a treatise of Lean product development methods. Quite the opposite—it is focused on one small piece, "visible knowledge." It is, however, one technique that Dantar Oosterwal and Durward Sobek have found to be very effective at Harley-Davidson and other places, and a tool that can make a difference whether used by itself or as a starting point for a larger journey into Lean product development. In completing this work, Oosterwal and Sobek kept the aim true to Allen’s original intent. The preface and first three chapters are essentially Allen’s original intellectual contribution. They have made editorial changes to improve readability and clarity of explanation. Throughout, they have attempted to preserve Allen’s voice in the writing, even keeping the narrative in first person as it was originally written. They have also added a fourth chapter that highlights some practical ways to apply the ideas presented in earlier chapters, illustrated with case examples from their experience.
Download or read book Computer and Information Science and Engineering written by Roger Lee and published by Springer Nature. This book was released on with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: