Download or read book Knowledge Based Integrated Aircraft Design written by Raghu Chaitanya Munjulury and published by Linköping University Electronic Press. This book was released on 2017-05-23 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and development of new aircraft are becoming increasingly expensive and timeconsuming. To assist the design process in reducing the development cost, time, and late design changes, the conceptual design needs enhancement using new tools and methods. Integration of several disciplines in the conceptual design as one entity enables to keep the design process intact at every step and obtain a high understanding of the aircraft concepts at early stages. This thesis presents a Knowledge-Based Engineering (KBE) approach and integration of several disciplines in a holistic approach for use in aircraft conceptual design. KBE allows the reuse of obtained aircrafts’ data, information, and knowledge to gain more awareness and a better understanding of the concept under consideration at early stages of design. For this purpose, Knowledge-Based (KB) methodologies are investigated for enhanced geometrical representation and enable variable fidelity tools and Multidisciplinary Design Optimization (MDO). The geometry parameterization techniques are qualitative approaches that produce quantitative results in terms of both robustness and flexibility of the design parameterization. The information/parameters from all tools/disciplines and the design intent of the generated concepts are saved and shared via a central database. The integrated framework facilitates multi-fidelity analysis, combining low-fidelity models with high-fidelity models for a quick estimation, enabling a rapid analysis and enhancing the time for a MDO process. The geometry is further propagated to other disciplines [Computational Fluid Dynamics (CFD), Finite Element Analysis (FEA)] for analysis. This is possible with an automated streamlined process (for CFD, FEM, system simulation) to analyze and increase knowledge early in the design process. Several processes were studied to streamline the geometry for CFD. Two working practices, one for parametric geometry and another for KB geometry are presented for automatic mesh generation. It is observed that analytical methods provide quicker weight estimation of the design and when coupled with KBE provide a better understanding. Integration of 1-D and 3-D models offers the best of both models: faster simulation, and superior geometrical representation. To validate both the framework and concepts generated from the tools, they are implemented in academia in several courses at Linköping University and in industry

Download or read book Knowledge Based Integrated Multidisciplinary Aircraft Conceptual Design written by and published by . This book was released on 2014 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book On Aircraft Conceptual Design written by Kristian Amadori and published by . This book was released on 2008 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents a design framework where analytical tools are linked together and operated from an efficient system level interface. The application field is aircraft conceptual design. Particular attention has been paid to CAD system integration and design optimization.

Download or read book Aircraft Design written by Mohammad H. Sadraey and published by John Wiley & Sons. This book was released on 2012-11-20 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive approach to the air vehicle design process using the principles of systems engineering Due to the high cost and the risks associated with development, complex aircraft systems have become a prime candidate for the adoption of systems engineering methodologies. This book presents the entire process of aircraft design based on a systems engineering approach from conceptual design phase, through to preliminary design phase and to detail design phase. Presenting in one volume the methodologies behind aircraft design, this book covers the components and the issues affected by design procedures. The basic topics that are essential to the process, such as aerodynamics, flight stability and control, aero-structure, and aircraft performance are reviewed in various chapters where required. Based on these fundamentals and design requirements, the author explains the design process in a holistic manner to emphasise the integration of the individual components into the overall design. Throughout the book the various design options are considered and weighed against each other, to give readers a practical understanding of the process overall. Readers with knowledge of the fundamental concepts of aerodynamics, propulsion, aero-structure, and flight dynamics will find this book ideal to progress towards the next stage in their understanding of the topic. Furthermore, the broad variety of design techniques covered ensures that readers have the freedom and flexibility to satisfy the design requirements when approaching real-world projects. Key features: • Provides full coverage of the design aspects of an air vehicle including: aeronautical concepts, design techniques and design flowcharts • Features end of chapter problems to reinforce the learning process as well as fully solved design examples at component level • Includes fundamental explanations for aeronautical engineering students and practicing engineers • Features a solutions manual to sample questions on the book’s companion website Companion website - www.wiley.com/go/sadraey

Download or read book Multidisciplinary Design Optimization Supported by Knowledge Based Engineering written by Jaroslaw Sobieszczanski-Sobieski and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multidisciplinary Design Optimization supported by Knowledge Based Engineering supports engineers confronting this daunting and new design paradigm. It describes methodology for conducting a system design in a systematic and rigorous manner that supports human creativity to optimize the design objective(s) subject to constraints and uncertainties. The material presented builds on decades of experience in Multidisciplinary Design Optimization (MDO) methods, progress in concurrent computing, and Knowledge Based Engineering (KBE) tools. Key features: Comprehensively covers MDO and is the only book to directly link this with KBE methods Provides a pathway through basic optimization methods to MDO methods Directly links design optimization methods to the massively concurrent computing technology Emphasizes real world engineering design practice in the application of optimization methods Multidisciplinary Design Optimization supported by Knowledge Based Engineering is a one-stop-shop guide to the state-of-the-art tools in the MDO and KBE disciplines for systems design engineers and managers. Graduate or post-graduate students can use it to support their design courses, and researchers or developers of computer-aided design methods will find it useful as a wide-ranging reference.

Download or read book Knowledge Based Engineering Techniques to Support Aircraft Design and Optimization written by Gianfranco La Rocca and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aircraft Design Concepts written by James DeLaurier and published by CRC Press. This book was released on 2022-05-16 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Design Concepts: An Introductory Course introduces the principles of aircraft design through a quantitative approach developed from the author’s extensive experience in teaching aircraft design. Building on prerequisite courses, the text develops basic design skills and methodologies, while also explaining the underlying physics. The book uses a historical approach to examine a wide range of aircraft types and their design. Numerous charts, photos, and illustrations are provided for in-depth view of aeronautical engineering. It addresses conventional tail-aft monoplanes, "flying-wing", biplane, and canard configurations. Providing detailed analysis of propeller performance, the book starts with simple blade-element theory and builds to the Weick method. Written for senior undergraduate and graduate students taking a single-semester course on Aircraft Design or Aircraft Performance, the book imparts both the technical knowledge and creativity needed for aircraft design.

Download or read book Aircraft Design written by Ajoy Kumar Kundu and published by Cambridge University Press. This book was released on 2010-04-12 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Design explores fixed winged aircraft design at the conceptual phase of a project. Designing an aircraft is a complex multifaceted process embracing many technical challenges in a multidisciplinary environment. By definition, the topic requires intelligent use of aerodynamic knowledge to configure aircraft geometry suited specifically to the customer's demands. It involves estimating aircraft weight and drag and computing the available thrust from the engine. The methodology shown here includes formal sizing of the aircraft, engine matching, and substantiating performance to comply with the customer's demands and government regulatory standards. Associated topics include safety issues, environmental issues, material choice, structural layout, understanding flight deck, avionics, and systems (for both civilian and military aircraft). Cost estimation and manufacturing considerations are also discussed. The chapters are arranged to optimize understanding of industrial approaches to aircraft design methodology. Example exercises from the author's industrial experience dealing with a typical aircraft design are included.

Download or read book Advanced Aircraft Design written by Egbert Torenbeek and published by John Wiley & Sons. This book was released on 2013-05-28 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the overall appearance of modern airliners has not changed a lot since the introduction of jetliners in the 1950s, their safety, efficiency and environmental friendliness have improved considerably. Main contributors to this have been gas turbine engine technology, advanced materials, computational aerodynamics, advanced structural analysis and on-board systems. Since aircraft design became a highly multidisciplinary activity, the development of multidisciplinary optimization (MDO) has become a popular new discipline. Despite this, the application of MDO during the conceptual design phase is not yet widespread. Advanced Aircraft Design: Conceptual Design, Analysis and Optimization of Subsonic Civil Airplanes presents a quasi-analytical optimization approach based on a concise set of sizing equations. Objectives are aerodynamic efficiency, mission fuel, empty weight and maximum takeoff weight. Independent design variables studied include design cruise altitude, wing area and span and thrust or power loading. Principal features of integrated concepts such as the blended wing and body and highly non-planar wings are also covered. The quasi-analytical approach enables designers to compare the results of high-fidelity MDO optimization with lower-fidelity methods which need far less computational effort. Another advantage to this approach is that it can provide answers to “what if” questions rapidly and with little computational cost. Key features: Presents a new fundamental vision on conceptual airplane design optimization Provides an overview of advanced technologies for propulsion and reducing aerodynamic drag Offers insight into the derivation of design sensitivity information Emphasizes design based on first principles Considers pros and cons of innovative configurations Reconsiders optimum cruise performance at transonic Mach numbers Advanced Aircraft Design: Conceptual Design, Analysis and Optimization of Subsonic Civil Airplanes advances understanding of the initial optimization of civil airplanes and is a must-have reference for aerospace engineering students, applied researchers, aircraft design engineers and analysts.

Download or read book Aircraft Design Projects written by Lloyd R. Jenkinson and published by Elsevier. This book was released on 2003-04-28 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written with students of aerospace or aeronautical engineering firmly in mind, this is a practical and wide-ranging book that draws together the various theoretical elements of aircraft design - structures, aerodynamics, propulsion, control and others - and guides the reader in applying them in practice. Based on a range of detailed real-life aircraft design projects, including military training, commercial and concept aircraft, the experienced UK and US based authors present engineering students with an essential toolkit and reference to support their own project work.All aircraft projects are unique and it is impossible to provide a template for the work involved in the design process. However, with the knowledge of the steps in the initial design process and of previous experience from similar projects, students will be freer to concentrate on the innovative and analytical aspects of their course project. The authors bring a unique combination of perspectives and experience to this text. It reflects both British and American academic practices in teaching aircraft design. Lloyd Jenkinson has taught aircraft design at both Loughborough and Southampton universities in the UK and Jim Marchman has taught both aircraft and spacecraft design at Virginia Tech in the US. * Demonstrates how basic aircraft design processes can be successfully applied in reality* Case studies allow both student and instructor to examine particular design challenges * Covers commercial and successful student design projects, and includes over 200 high quality illustrations

Download or read book Conceptual Aircraft Design written by Ajoy Kumar Kundu and published by John Wiley & Sons. This book was released on 2019-01-02 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a Comprehensive Introduction to Aircraft Design with an Industrial Approach This book introduces readers to aircraft design, placing great emphasis on industrial practice. It includes worked out design examples for several different classes of aircraft, including Learjet 45, Tucano Turboprop Trainer, BAe Hawk and Airbus A320. It considers performance substantiation and compliance to certification requirements and market specifications of take-off/landing field lengths, initial climb/high speed cruise, turning capability and payload/range. Military requirements are discussed, covering some aspects of combat, as is operating cost estimation methodology, safety considerations, environmental issues, flight deck layout, avionics and more general aircraft systems. The book also includes a chapter on electric aircraft design along with a full range of industry standard aircraft sizing analyses. Split into two parts, Conceptual Aircraft Design: An Industrial Approach spends the first part dealing with the pre-requisite information for configuring aircraft so that readers can make informed decisions when designing vessels. The second part devotes itself to new aircraft concept definition. It also offers additional analyses and design information (e.g., on cost, manufacture, systems, role of CFD, etc.) integral to conceptual design study. The book finishes with an introduction to electric aircraft and futuristic design concepts currently under study. Presents an informative, industrial approach to aircraft design Features design examples for aircraft such as the Learjet 45, Tucano Turboprop Trainer, BAe Hawk, Airbus A320 Includes a full range of industry standard aircraft sizing analyses Looks at several performance substantiation and compliance to certification requirements Discusses the military requirements covering some combat aspects Accompanied by a website hosting supporting material Conceptual Aircraft Design: An Industrial Approach is an excellent resource for those designing and building modern aircraft for commercial, military, and private use.

Download or read book Airplane Design Preliminary configuration design and integration of the propulsion system written by Jan Roskam and published by DARcorporation. This book was released on 1985 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Foundations of Circulation Control Based Small Scale Unmanned Aircraft written by Konstantinos Kanistras and published by Springer. This book was released on 2017-11-02 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on using and implementing Circulation Control (CC) - an active flow control method used to produce increased lift over the traditionally used systems, like flaps, slats, etc. - to design a new type of fixed-wing unmanned aircraft that are endowed with improved aerodynamic efficiency, enhanced endurance, increased useful payload (fuel capacity, battery cells, on-board sensors) during cruise flight, delayed stall, and reduced runway during takeoff and landing. It presents the foundations of a step-by-step comprehensive methodology from design to implementation and experimental testing of Coandǎ based Circulation Control Wings (CCWs) and CC system, both integral components of the new type of aircraft, called Unmanned Circulation Control Air Vehicle. The methodology is composed of seven coupled phases: theoretical and mathematical analysis, design, simulation, 3-D printing/prototyping, wind tunnel testing, wing implementation and integration, and flight testing. The theoretical analysis focuses on understanding the physics of the flow and on defining the design parameters of the geometry restrictions of the wing and the plenum. The design phase centers on: designs of Coandǎ surfaces based on wing geometry specifications; designing and modifying airfoils from well-known ones (NACA series, Clark-Y, etc.); plenum designs for flow uniformity; dual radius flap designs to delay flow separation and reduce cruise drag. The simulation phase focuses on Computational Fluid Dynamics (CFD) analysis and simulations, and on calculating lift and drag coefficients of the designed CCWs in a simulation environment. 3-D printing and prototyping focuses on the actual construction of the CCWs. Wind tunnel testing centers on experimental studies in a laboratory environment. One step before flight testing is implementation of the qualified CCW and integration on the UAV platform, along with the CC system. Flight testing is the final phase, where design validation is performed. This book is the first of its kind, and it is suitable for students and researchers interested in the design and development of CCWs for small-scale aircraft. Background knowledge on fundamental Aerodynamics is required.

Download or read book Cases on Modern Computer Systems in Aviation written by Shmelova, Tetiana and published by IGI Global. This book was released on 2019-02-19 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because trainees need to learn about the underlying technologies to use automation safely and efficiently, the development of automated aviation systems training is a growing challenge. Task analysis has been singled out as the basis of the training, but it can be more time-consuming than traditional development techniques. Cases on Modern Computer Systems in Aviation is an essential reference source that covers new information technology use in aviation systems to streamline the cybersecurity, decision-making, planning, and design processes within the aviation industry. Featuring coverage on a broad range of topics such as computer systems in aviation, artificial intelligence, software-defined networking (SDN), air navigation systems, decision support systems (DSS), and more, this publication is ideally designed for aviation specialists and industry professionals, technicians, practitioners, researchers, and academicians seeking current research on modern modeling approaches to streamline management in aviation.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Advances in Multidisciplinary Analysis and Optimization written by and published by . This book was released on 1989 with total page 1084 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Product Lifecycle Management for Digital Transformation of Industries written by Ramy Harik and published by Springer. This book was released on 2017-03-15 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 13th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2016, held in Columbia, SC, USA, in July 2016. The 57 revised full papers presented were carefully reviewed and selected from 77 submissions. The papers are organized in the following topical sections: knowledge sharing, re-use and preservation; collaborative development architectures; interoperability and systems integration; lean product development and the role of PLM; PLM and innovation; PLM tools; cloud computing and PLM tools; traceability and performance; building information modeling; big data analytics and business intelligence; information lifecycle management; industry 4.0; metrics, standards and regulation; and product, service and systems.