Download or read book Knowledge Based CAD and Microelectronics written by Tony Holden and published by North Holland. This book was released on 1987 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: To fully exploit VLSI technology, future CAD tools need to perform a high proportion of the intelligent decision-making necessary for design. It is imperative that these tasks be massively automated so that the intellectual load on the human designer is reduced, allowing a more efficient use of his time and creative abilities. This book investigates the applicability of knowledge-based techniques to the problems of VLSI design. Topics covered include: an overview of knowledge-based techniques; a description of work illustrating the application of these techniques to various VLSI design tasks; and a survey of workstations and software available for constructing knowledge-based systems. Although much of the material in this book has been illustrated using examples from microelectronic CAD, the issues and techniques have been presented in such a way as to make them useful to managers, designers and researchers who wish to learn of the advantages of knowledge-based techniques in practical applications.
Download or read book Algorithmic and Knowledge Based CAD for VLSI written by Gaynor E. Taylor and published by IET. This book was released on 1992 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Samples the present state-of-the-art in CAD for VLSI, covering both newly developed algorithms and applications of techniques from the artificial intelligence community. The material is based on a tutorial course run in conjunction with the 1991 European Conference on Circuit Theory and Design, and should interest engineers involved in the design and testing of integrated circuits and systems. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Innovation in Product Design written by Monica Bordegoni and published by Springer Science & Business Media. This book was released on 2011-08-15 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation in Product Design gives an overview of the research fields and achievements in the development of methods and tools for product design and innovation. It presents contributions from experts in many different fields covering a variety of research topics related to product development and innovation. Product lifecycle management, knowledge management, product customization, topological optimization, product virtualization, systematic innovation, virtual humans, design and engineering, and rapid prototyping are the key research areas described in the book. It also details successful case studies developed with industrial companies. Innovation in Product Design is written for academic researchers, graduate students and professionals in product development disciplines who are interested in understanding how novel methodologies and technologies can make the product development process more efficient.
Download or read book Technology CAD Systems written by Franz Fasching and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the cost of developing new semiconductor technology at ever higher bit/gate densities continues to grow, the value of using accurate TCAD simu lation tools for design and development becomes more and more of a necessity to compete in today's business. The ability to tradeoff wafer starts in an advanced piloting facility for simulation analysis and optimization utilizing a "virtual fab" S/W tool set is a clear economical asset for any semiconductor development company. Consequently, development of more sophisticated, accurate, physics-based, and easy-to-use device and process modeling tools will receive continuing attention over the coming years. The cost of maintaining and paying for one's own internal modeling tool development effort, however, has caused many semiconductor development companies to consider replacing some or all of their internal tool development effort with the purchase of vendor modeling tools. While some (noteably larger) companies have insisted on maintaining their own internal modeling tool development organization, others have elected to depend totally on the tools offered by the TCAD vendors and have consequently reduced their mod eling staffs to a bare minimal support function. Others are seeking to combine the best of their internally developed tool suite with "robust", "proven" tools provided by the vendors, hoping to achieve a certain synergy as well as savings through this approach. In the following sections we describe IBM's internally developed suite of TCAD modeling tools and show several applications of the use of these tools.
Download or read book CAD CAM Robotics and Factories of the Future written by Birendra Prasad and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is about automation - automation in design, automation in manufacturing, and automation in production. Automation is essen tial for increased productivity of quality products at reduced costs. That even partial or piecemeal automation of a production facility can deliver dramatic improvements in productivity has been amply demon strated in many a real-life situation. Hence, currently, great ef forts are being devoted to research and development of general as well special methodologies of and tools for automation. This volume re ports on some of these methodologies and tools. In general terms, methodologies for automation can be divided into two groups. There are situations where a process, whether open-loop or closed-loop, is fairly clearly understood. In such a situation, it is possible to create a mathematical model and to prescribe a mathe matical procedure to optimize the output. If such mathematical models and procedures are computationally tractable, we call the correspond ing automation - algorithmic or parametric programming. There is, however, a second set of situations which include process es that are not well understood and the available mathematical models are only approximate and discrete. While there are others for which mathematical procedures are so complex and disjoint that they are computationally intractable. These are the situations for which heuristics are quite suitable for automation. We choose to call such automation, knowledge-based automation or heuristic programming.
Download or read book The Application of Knowledge Based Systems to Microelectronic Computer Aided Design written by Tony Holden and published by . This book was released on 1981 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2017 14th International Conference The Experience of Designing and Application of CAD Systems in Microelectronics CADSM written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developing Expert CAD Systems written by V. Begg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of CAD to electronics technology Computer-aided design (CAD) is one way of coping with the problem of how to design and build very complex systems. This problem is particularly acute in electronics technology. Designs are now (1984) said to be design-limited, rather than technology-limited. It can take months to generate a design for a chip, so that it might be obsolete before it can be manufactured. Manual design of large-scale integration (LSI) chips (circa 10,000 gates) is almost impossible. However, using current technology it is possible to produce chips having 250,000 gates. It is understandable, therefore, that there is great interest in improving existing CAD systems. Designers of CAD systems are concerned with formalizing and automating as much of the design task as possible. Automating design of any kind has long been acknowledged as a project fraught with intractable problems. A human designer has to have an understanding of the nature of the materials used in manufacture, a knowledge of common problems and well-tried solutions, and above all, creativity in producing new designs. Understanding, knowledge and creativity are three properties even the most artificially intelligent of computer programs have been entirely lacking in until very recently. Some people would deny computers these qualities entirely, on philosophical grounds (eg Dreyfus 1979; Searle 1981). There are few theories in cognitive psychology which can help.
Download or read book Microstrip Antennas written by N Nasimuddin and published by BoD – Books on Demand. This book was released on 2011-04-04 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last 40 years, the microstrip antenna has been developed for many communication systems such as radars, sensors, wireless, satellite, broadcasting, ultra-wideband, radio frequency identifications (RFIDs), reader devices etc. The progress in modern wireless communication systems has dramatically increased the demand for microstrip antennas. In this book some recent advances in microstrip antennas are presented.
Download or read book Handbook of VLSI Chip Design and Expert Systems written by A. F. Schwarz and published by Academic Press. This book was released on 2014-05-10 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of VLSI Chip Design and Expert Systems provides information pertinent to the fundamental aspects of expert systems, which provides a knowledge-based approach to problem solving. This book discusses the use of expert systems in every possible subtask of VLSI chip design as well as in the interrelations between the subtasks. Organized into nine chapters, this book begins with an overview of design automation, which can be identified as Computer-Aided Design of Circuits and Systems (CADCAS). This text then presents the progress in artificial intelligence, with emphasis on expert systems. Other chapters consider the impact of design automation, which exploits the basic capabilities of computers to perform complex calculations and to handle huge amounts of data with a high speed and accuracy. This book discusses as well the characterization of microprocessors. The final chapter deals with interactive I/O devices. This book is a valuable resource for system design experts, circuit analysts and designers, logic designers, device engineers, technologists, and application-specific designers.
Download or read book Microtransducer CAD written by Arokia Nathan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-aided-design (CAD) of semiconductor microtransducers is relatively new in contrast to their counterparts in the integrated circuit world. Integrated silicon microtransducers are realized using microfabrication techniques similar to those for standard integrated circuits (ICs). Unlike IC devices, however, microtransducers must interact with their environment, so their numerical simulation is considerably more complex. While the design of ICs aims at suppressing "parasitic” effects, microtransducers thrive on optimizing the one or the other such effect. The challenging quest for physical models and simulation tools enabling microtransducer CAD is the topic of this book. The book is intended as a text for graduate students in Electrical Engineering and Physics and as a reference for CAD engineers in the microsystems industry.
Download or read book CAD CAM Robotics and Factories of the Future written by Birendra Prasad and published by Springer. This book was released on 2013-12-19 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete shop floor automation - a "lights out factory", where workers initially set up all machines, turn off the lights, lock the door and the machine churns up the parts - remains an unfulfilled dream. Yet when we look at the enormity of the process of automation and integration even for the most simply conceived part factory, we can recognize that automation has been applied and is being applied, more so when it made sense from a cost/benefit standpoint. It is our nature to be dissatisfied with near term progress, but when we realize how short a time the tools to do that automation have been available, the progress is clearly noteworthy - considering the multitudes of factors and the environment we have to deal with. Most of the automa tion problems we confront in today's environment are multidisciplinary in nature. They require not just the knowledge and experience in various distinct fields but good cooperation from different disci plined organizations to adequately comprehend and solve such problems. In Volume III we have many examples that reflect the current state of the art techniques of robotics and plant automation. The papers for Volume III have been arranged in a logical order of automation planning, automated assembly, robot programming and simula tion, control, motion coordination, communication and networking to factories of the future.
Download or read book CAD CAM robotics and factories of the future written by Birendra Prasad and published by Springer Science & Business Media. This book was released on 1989-01-01 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book VLSI Custom Microelectronics written by Stanley L. Hurst and published by CRC Press. This book was released on 1998-11-05 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on the design and production of integrated circuits specifically designed for a particular application from original equipment manufacturers. The book outlines silicon and GaAs semiconductor fabrication techniques and circuit configurations; compares custom design style; discusses computer-aided design tools; and more.
Download or read book Knowledge based Design Systems written by Richard Coyne and published by Addison Wesley Publishing Company. This book was released on 1990 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrated Distributed Intelligent Systems for Engineering Design written by Ming Rao and published by CRC Press. This book was released on 1996-11-15 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the philosophy, methodology, techniques, and applications of IDIS for engineering design. Looks at recent research, and details a five-step problem-solving strategy of problem definition, conceptual design, parameter design, design analysis, and design evaluation. Describes industrial applications of IDIS, including the design of a mechanical transmission, a heat exchanger network, and a process control system. For graduate courses on engineering design, artificial intelligence, and computer integrated manufacturing. No index. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Knowledge Intensive CAD written by Martti Mäntylä and published by Springer. This book was released on 2016-01-09 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge-Intensive CAD clarifies and elaborates the concepts of knowledge-intensive design and CAD. In today's advanced manufacturing environment, CAD systems should not only assist designers and engineers during product design, but also in design information for use in later stages of the process such as production, distribution and operation. This book focuses on the sharing of knowledge across life-cycle stages and organizational boundaries.
