Download or read book Knee Surgery using Computer Assisted Surgery and Robotics written by Fabio Catani and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the full range of current applications of computer-assisted surgery and robotics in the field of knee surgery, and also considers potential future applications. The impact of computer-assisted surgery on a wide range of surgical procedures is clearly explained. Procedures considered include total knee arthroplasty, unicompartmental knee arthroplasty, cruciate ligament reconstruction, patellofemoral arthroplasty, and revision surgery. In each case, technical aspects are thoroughly addressed in a readily understandable manner. Knee Surgery Using Computer-Assisted Surgery and Robotics will be an ideal guide to this exciting field for both novice and more experienced surgeons who treat knee injuries and disorders.

Download or read book Computer and Robotic Assisted Hip and Knee Surgery written by Anthony DiGioia and published by Oxford University Press. This book was released on 2004-11-04 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The techniques of computer and robotic assisted surgery are making a major impact on the practice of orthopaedics. This book provides a complete overview of the technical and clinical aspects of computer-assisted surgery with extensive coverage of the use of robotic and navigation technologies in the surgical setting. The first part of the book presents the clinical problems and describes the basic technological components. The second part of the book describes specific applications in hip and knee reconstructive surgery.

Download or read book Personalized Hip and Knee Joint Replacement written by Charles Rivière and published by Springer Nature. This book was released on 2020-06-30 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book describes and illustrates the surgical techniques, implants, and technologies used for the purpose of personalized implantation of hip and knee components. This new and flourishing treatment philosophy offers important benefits over conventional systematic techniques, including component positioning appropriate to individual anatomy, improved surgical reproducibility and prosthetic performance, and a reduction in complications. The techniques described in the book aim to reproduce patients’ native anatomy and physiological joint laxity, thereby improving the prosthetic hip/knee kinematics and functional outcomes in the quest of the forgotten joint. They include kinematically aligned total knee/total hip arthroplasty, partial knee replacement, and hip resurfacing. The relevance of available and emerging technological tools for these personalized approaches is also explained, with coverage of, for example, robotics, computer-assisted surgery, and augmented reality. Contributions from surgeons who are considered world leaders in diverse fields of this novel surgical philosophy make this open access book will invaluable to a wide readership, from trainees at all levels to consultants practicing lower limb surgery

Download or read book Total Knee Arthroplasty written by James Alan Rand and published by Lippincott Williams & Wilkins. This book was released on 1993 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference on total knee arthroplasty describes all surgical techniques and prosthetic designs for primary and revision arthroplasty, discusses every aspect of patient selection, preoperative planning, and intraoperative and postoperative care.

Download or read book Robotics in Knee and Hip Arthroplasty written by Jess H. Lonner and published by Springer. This book was released on 2019-06-20 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state-of-the-art book focuses specifically on the current and emerging uses of robotics for knee and hip arthroplasty, with an expanding market anticipated, particularly as costs drop, data emerges and surgical efficiencies improve. It is divided into four main sections. Part one covers the background and basic principles of robotics in orthopedic surgery, discussing its history and evolution, current concepts and available technologies, perioperative protocols for recovery and pain management, economic considerations, and risks and complications. The second and third parts focus on the techniques themselves for the knee and hip respectively, including unicompartmental and bicompartmental knee arthroplasty, patellofemoral arthroplasty, and total knee and hip arthroplasty utilizing Navio, Mako, iThink, Omni and ROSA Knee robots. The final section presents the emerging use of robotics in spine surgery as well as for hospital process improvement. Presenting the most current techniques, technology and evidence, Robotics in Knee and Hip Arthroplasty will be a valuable resource for orthopedic surgeons, residents and fellows looking to implement and utilize these developing management strategies in their clinical practice.

Download or read book Computer Assisted Orthopaedic Surgery for Hip and Knee written by Nobuhiko Sugano and published by Springer. This book was released on 2018-04-10 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on two major areas in the field of computer assisted orthopaedic surgery (CAOS): hip and knee surgery. It reviews the current clinical status of the various CAOS tools for hip and knee arthroplasty, osteotomy, ligament reconstruction, spine surgery, trauma surgery, and tumour surgery that have become available in recent years and discusses future applications based on fundamental research and continuously developing computer technology / devices. Computer Assisted Orthopaedic Surgery for Hip and Knee highlights three areas – total knee arthroplasty (TKA); total hip arthroplasty (THA) and hip osteotomy; and statistical shape modelling. It is a valuable resource for orthopaedic surgeons, clinical technologists and computer scientists and other specialists interested in this technology.

Download or read book Computer Navigated and Handheld Robotic Knee Arthroplasty written by Anoop Jhurani and published by Thieme. This book was released on 2022-09-15 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Navigated and Handheld Robotic Knee Arthroplasty: An Illustrative Guide is a compendium of principles and practices of using technology to improve outcomes of partial and total knee arthroplasty. The first two chapters describe the basics of computer-assisted surgery and setting up the operation theatre. Chapters 3 and 4 describe varus and valgus deformities, and their association with sagittal plane deformity. The interplay and influence of one over the other are described with the help of clinical pictures and case examples. Chapters 5 and 6 include severe sagittal plane deformity (full flexion deformity, recurvatum) and an algorithmic approach to correct both. Chapters 7 to 9 are on complex cases such as extra-articular deformity, implants in situ, etc., and describe the principles of managing these complex cases with representative examples. Chapters 10 and 11 cover partial and total knee arthroplasty with handheld robotics. This new technology helps in better assessment of soft tissue behaviour and aids in improved implantation considering individual knee kinematics. Key Features Some conventional concepts in knee arthroplasty have been questioned and new ideas presented with the help of objective data. Important concepts are highlighted in Principles, Pearls, Pitfalls, and Points to Remember sections in each chapter. Written in a lucid, point-wise format, substantiated with interesting case examples. This book will be useful to the mentor and mentee alike.

Download or read book Handbook of Robotic and Image Guided Surgery written by Mohammad Abedin-Nasab and published by Elsevier. This book was released on 2019-09-25 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Robotic and Image-Guided Surgery provides state-of-the-art systems and methods for robotic and computer-assisted surgeries. In this masterpiece, contributions of 169 researchers from 19 countries have been gathered to provide 38 chapters. This handbook is 744 pages, includes 659 figures and 61 videos. It also provides basic medical knowledge for engineers and basic engineering principles for surgeons. A key strength of this text is the fusion of engineering, radiology, and surgical principles into one book. A thorough and in-depth handbook on surgical robotics and image-guided surgery which includes both fundamentals and advances in the field A comprehensive reference on robot-assisted laparoscopic, orthopedic, and head-and-neck surgeries Chapters are contributed by worldwide experts from both engineering and surgical backgrounds

Download or read book Navigation and Robotics in Total Joint and Spine Surgery written by James B. Stiehl and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the recent international experience with the applications of computer assisted orthopaedic surgery in clinical practice. Recent decades of the human condition have witnessed the dramatic evolution of technology and the application to everyday existence. The ability to use such innovation in surgical practice is now easily within our grasp. Though clinical experience is short term, as will be demonstrated the problems are finite and limited only by the need for refinement. We can now clearly state that current surgical practice will be revolutionized by these new methodologies. This edition is all encompassing for musculoskeletal surgery including the spine, trauma, sports, and reconstructive surgery. Because of its simplicity, computer navigation will be an early tool in such areas as total joint replacement, anterior cruciate ligament reconstruction, and placement of pedicle screws in complex spinal surgery. New techniques in Minimally Invasive Surgery will require the precision and digital "surgical exposure" offered by the computer. However, we anticipate in a few years, that robotics with computer activated technology will rise to an important role for the practicing surgeon. Surgeons who are comfortable with technology and yearn for better solutions with their techniques will benefit from the knowledge of this experience. Americans at the AAOS 2003 annual meeting in New Orleans, have now joined the wave of enthusiasm for computer assisted orthopaedic surgery (CAOS) as well as the exciting new vistas of Minimally Invasive Surgery.

Download or read book Computer integrated Surgery written by Russell H. Taylor and published by MIT Press. This book was released on 1996 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Computer-Integrated Surgery leading researchers and clinical practitioners describe the exciting new partnership that is being forged between surgeons and machines such as computers and robots, enabling them to perform certain skilled tasks better than either can do alone.The 19 chapters in part I, Technology, explore the components -- registration, basic tools for surgical planning, human-machine interfaces, robotic manipulators, safety -- that are the basis of computer-integrated surgery. These chapters provide essential background material needed to get up to speed on current work as well as a ready reference for those who are already active in the field.The 39 chapters in part II, Applications, cover eight clinical areas -- neurosurgery, orthopedics, eye surgery, dentistry, minimal access surgery, ENT surgery, craniofacial surgery, and radiotherapy -- with a concluding chapter on the high-tech operating room. Each section contains a brief introduction as well as at least one "requirements and opportunities" chapter written by a leading clinician in the area under discussion.

Download or read book Medical Robotics written by Paula Gomes and published by Elsevier. This book was released on 2012-10-18 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in research have led to the use of robotics in a range of surgical applications. Medical robotics: Minimally invasive surgery provides authoritative coverage of the core principles, applications and future potential of this enabling technology. Beginning with an introduction to robot-assisted minimally invasive surgery (MIS), the core technologies of the field are discussed, including localization and tracking technologies for medical robotics. Key applications of robotics in laparoscopy, neurology, cardiovascular interventions, urology and orthopaedics are considered, as well as applications for ear, nose and throat (ENT) surgery, vitreoretinal surgery and natural orifice transluminal endoscopic surgery (NOTES). Microscale mobile robots for the circulatory system and mesoscale robots for the gastrointestinal tract are investigated, as is MRI-based navigation for in vivo magnetic microrobots. Finally, the book concludes with a discussion of ethical issues related to the use of robotics in surgery. With its distinguished editor and international team of expert contributors, Medical robotics: Minimally invasive surgery is a comprehensive guide for all those working in the research, design, development and application of medical robotics for surgery. It also provides an authoritative introduction for academics and medical practitioners working in this field. Provides authoritative coverage of the core principles, applications and future potential of medical robotics Introduces robot-assisted minimally invasive surgery (MIS), including the core technologies of the field and localization and tracking technologies for medical robotics Considers key applications of robotics in laparoscopy, neurology, cardiovascular interventions, urology and orthopaedics

Download or read book Digital Orthopedics written by Guoxian Pei and published by Springer. This book was released on 2019-03-14 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses all aspects of digital techniques in orthopedics, from development of the core principles to imaging techniques, computer-aided design, reverse engineering and their applications. It illustrates the successful applications in accurate operation using 3-D reconstruction and applied digital techniques. All illustrations and tables were meticulously selected and are easy to understand. The book was written for all doctors and researchers who work in the fields of orthopedics, CAD/CAM and anatomy. Above all, surgeons, physiatrists, radiologists, and engineers in image processing and orthopedics will find it a valuable resource.

Download or read book Computer Aided Surgery written by Masakatsu Fujie and published by Springer. This book was released on 2016-02-22 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research advances in the theory, design, control, and application of robot systems intended for a variety of purposes such as manipulation, manufacturing, automation, surgery, locomotion, and biomechanics. Several chapters deal with fundamental kinematics in nature, including synthesis, calibration, redundancy, force control, dexterity, inverse and forward kinematics, kinematic singularities, and over-constrained systems. This book is a compilation of the extended versions of the very best papers selected from the many that were presented at the Asian Conference on Computer-Aided Surgery held September 16–18, 2013, in Tokyo, Japan (ACCAS 2013).

Download or read book Navigation and Robotics in Total Joint and Spine Surgery written by James B. Stiehl and published by Springer. This book was released on 2012-04-08 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Technique of Total Knee Arthroplasty E Book written by William M. Mihalko and published by Elsevier Health Sciences. This book was released on 2022-05-03 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1990, Dr. Kenneth Krackow wrote The Technique of Total Knee Arthroplasty to teach the basics of TKA for end-stage arthritis—everything from nonsurgical to surgical intervention and postoperative rehabilitation. Now completely revised for a new generation of surgeons, the 2nd Edition of this classic text continues its original goal of helping advanced practitioners acquire more knowledge and skill in primary and revision total knee arthroplasty. This fully updated volume, revised by Dr. Krackow and his former fellows Drs. William M. Mihalko and Michael A. Mont, keeps you current with major changes and advances in field, including patient optimization, outpatient procedures, robotics and new technology, difficult decisions during surgery, and more. Offers comprehensive and expert coverage of both inpatient and outpatient primary TKA, now fully revised with new chapters on Patient Considerations, Modifications, Optimizing the Important Comorbidities, TKA Balancing, and more. Addresses key issues of patient optimization such as obesity, diabetes, heart disease, rheumatoid arthritis, and peripheral vascular disease. Provides evidence for TKA outcomes and complications: “What do I tell my patient? Focuses on the latest and best techniques and surgical approaches, including computer and robotic assisted surgery, uncemented TKA, assessing and planning for the difficult TKA, outpatient TKA considerations, and preventing readmissions post-surgery. Discusses how to handle all deformity aspects of the lower extremity, bone defects, and ligamentous insufficiency during surgery. Includes numerous illustrations, line art, radiographs, and clinical photos for optimal visualization of each procedure.

Download or read book Joint Arthroplasty written by Shinichi Imura and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of total joint arthroplasty throughout the world has contributed manifold benefits to patients who suffer from joint diseases. Concurrently, however, there has been an increase in revision surgery. Many orthopedic surgeons agree that durability of prostheses is an eternal problem. In particular, periprosthetic osteolysis recently has been identified as one of the serious problems affecting prosthetic dura bility. To improve durability, osteolysis and many other problems must be investi gated and solved both experimentally and clinically with respect to such aspects as prosthetic material, design, and biological and biomechanical behavior. This book comprises 37 papers that were presented by orthopedic surgeons and biomedical engineers at the 28th Annual Meeting of the Japanese Society for Replace ment Arthroplasty, held in March 1998 in Kanazawa, Japan. The volume is thus a compilation of the latest knowledge about the pathogenesis and reduction of osteolysis and wear, newly developed total hip prostheses, and other current topics of total knee arthroplasty. We earnestly hope that this book will be of benefit to clinicians and researchers, and that it will contribute to the creation of more durable total joint prostheses in the future. SHINICHI IMURA v Contents Preface .................... '" .. .. .. ... . .. .. .. . ... .. . . .. . ... . . .. . V List of Contributors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XI . . . . . . . . . . . . Part 1 Wear and Pathogenesis of Osteolysis Friction and Wear of Artificial Joints: A Historical Review N. AKAMATSU ................................................ , 3 Matrix Degradation in Osteoclastic Bone Resorption Under Pathological Conditions .

Download or read book Robot Assisted Surgery written by Fouad Sabry and published by One Billion Knowledgeable. This book was released on 2022-10-05 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: What Is Robot Assisted Surgery Surgical operations that are carried out with robotic equipment are referred to as having been subjected to robotic surgery. The objective of the development of robotically assisted surgery was to improve the skills of surgeons doing open surgery and to attempt to overcome the limits of the minimally invasive surgical methods that were already in use at the time. How You Will Benefit (I) Insights, and validations about the following topics: Chapter 1: Robot-assisted surgery Chapter 2: General surgery Chapter 3: Neurosurgery Chapter 4: Laparoscopy Chapter 5: Heller myotomy Chapter 6: Hysterectomy Chapter 7: Remote surgery Chapter 8: Minimally invasive procedure Chapter 9: Image-guided surgery Chapter 10: Prostatectomy Chapter 11: Tubal reversal Chapter 12: Laparoscopic radical prostatectomy Chapter 13: Computer-assisted surgery Chapter 14: da Vinci Surgical System Chapter 15: Mani Menon Chapter 16: Ashutosh Tewari Chapter 17: SILS gastric banding Chapter 18: ZEUS robotic surgical system Chapter 19: Surgery simulator Chapter 20: Michael Stifelman Chapter 21: Faiz Bhora (II) Answering the public top questions about robot assisted surgery. (III) Real world examples for the usage of robot assisted surgery in many fields. (IV) 17 appendices to explain, briefly, 266 emerging technologies in each industry to have 360-degree full understanding of robot assisted surgery' technologies. Who This Book Is For Professionals, undergraduate and graduate students, enthusiasts, hobbyists, and those who want to go beyond basic knowledge or information for any kind of robot assisted surgery.