Download or read book Ziegler Natta Catalysts Polymerizations written by John Jr. Boor and published by Elsevier. This book was released on 2012-12-02 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ziegler-Natta Catalysts and Polymerizations reviews the general aspects of Ziegler-Natta catalysts and polymerizations of olefins, dienes, and many other types of monomers. Topics covered include the physical state of the polymer during polymerization; modification of Ziegler-Natta catalysts by third components; and termination of polymer chain growth. The oxidation state of catalysts and active centers is also discussed, along with copolymerizations and block polymerizations. This book is comprised of 23 chapters and begins with an overview of Ziegler-Natta catalysts and polymerizations, their historical origins, scientific and commercial importance, and major advances in polymer science. The next chapter focuses on definitions and stereochemistry of Ziegler-Natta catalysts, together with analytical methods used to identify and quantitatively measure their structures. Some of the polymers produced commercially with Ziegler-Natta catalysts are considered. The discussion then turns to mechanisms for initiating and propagating olefins; mechanisms for stereochemical control of conjugated and nonconjugated dienes; and the basic kinetic parameters that characterize Ziegler-Natta polymerizations. This monograph is written especially for chemistry and engineering graduate students and for industrial chemists, engineers, and managers who may become involved in a Ziegler-Natta problem.

Download or read book Thermodynamics of Polymerization written by Hideo Sawada and published by . This book was released on 1976 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Olefin Polymerization written by Walter Kaminsky and published by Wiley-VCH. This book was released on 2006-08-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an enormous velocity, olefin polymerization has expanded to one of the most significant fields in polymers since the first industrial use about 50 years ago. In 2005, 100 million tons of polyolefins were produced - the biggest part was catalyzed by metallorganic compounds. The Hamburg Macromolecular Symposium 2005 with the title "Olefin Polymerization" involved topics such as new catalysts and cocatalysts, kinetics, mechanism and polymer reaction engineering, synthesis of special polymers, and characterization of polyolefins. The conference combined scientists from different disciplines to discuss latest research results of polymers and to offer each other the possibility of cooperation. This is reflected in this volume, which contains invited lectures and selected posters presented at the symposium.

Download or read book Metalorganic Catalysts for Synthesis and Polymerization written by Walter Kaminsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: 45 years after the discovery of transition metals and organometallics as cocatalysts for the polymerization of olefins and for organic synthesis, these compounds have not lost their fascination. The birthday of Karl Ziegler, the great pioneer in this metalorganic catalysis, is now 100 years ago. Polyolefins and polydienes produced by Ziegler-Natta catalysis are the most important plastics and elastomers. New impulses for the polymerization of olefins have been brought about by highly active metallocenes and other single site catalysts. Just by changing the ligands of the organometallic compounds, the structure of the polymers produced can be tailored in a wide manner. In invited lectures and posters, relevant aspects of the metalorganic catalysts for synthesis and polymerization are discussed in this book. This includes mechanism and kinetics, stereochemistry, material properties, and industrial applications.

Download or read book Kinetics of Ziegler Natta Polymerization written by Tominaga Keii and published by Kluwer Academic Publishers. This book was released on 1972 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ziegler Catalysts written by Gerhard Fink and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forty years after Ziegler's discovery of the "Aufbaureaktion" and low-pressure ethene polymerization, transition metal catalyzed olefin and diolefin polymerization continues to represent one of the most active and exciting areas. Since the 1980s, outstanding scientific innovations and process improvements have revolutionized polyolefin technology and greatly simplified polymerization processes. Well-defined catalyst systems are now at hand and facilitate the understanding of basic reaction mechanisms and correlations between catalyst structures, polymer microstructures, and polymer properties. This book reviews some of the modern approaches in organometallic chemistry, Ziegler-Natta catalysis, polymerization processes, design of novel materials, and the modelling in catalyst and process development.

Download or read book Isospecific Polymerization of Olefins with Heterogeneous Ziegler Natta Catalysts written by Y. V. Kissin and published by . This book was released on 1985 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Kinetics of Ziegler Natta Polymerization written by Tominaga Keii and published by Kluwer Academic Publishers. This book was released on 1972 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transition Metals and Organometallics as Catalysts for Olefin Polymerization written by Walter Kaminsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 30 years after the discovery of transition metals and organometal lics as catalysts for olefin polymerization these catalysts did not have lost their fascination. Since 1953 when Karl Ziegler has discovered the catalytic polymerization of ethylene leading to plastically formable polymers which are mechanically stable up to temperatures of about 100°C, synthetic polymers and rubbers have made their way right into private houses. This discovery has been a main impetus for the fast growing production of plastics. The stereoselective poly merization of propylene and other long-chain a-olefins first detected by Giulio Natta leads to an even broadened field of applications. Another enforcing factor were the developments of Standard Oil of Indiana and Phillipps Petroleum Company who engaged in the polymerization of a-olefins supported molybdenum, cobalt and later on chromium catalysts which clearly indicates the wide variety of suitable systems. This kind of research acknowledged merit when in 1963 the Nobel prize of chemistry was awarded to Ziegler and Natta. Although to a great extent there is a technical application for these catalysts, up to now the nature of the active centres and many reaction mechanisms are not completely known.

Download or read book Alkene Polymerization Reactions with Transition Metal Catalysts written by Yury Kissin and published by Elsevier. This book was released on 2008-03-10 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past 30 years, the field of alkene polymerization over transition metal catalysts underwent several major changes:1. The list of commercial heterogeneous Ziegler-Natta catalysts for the synthesis of polyethylene and stereoregular polyolefins was completely renewed affording an unprecedented degree of control over the polymer structure.2. Research devoted to metallocene and other soluble transition-metal catalysis has vastly expanded and has shifted toward complexes of transition metals with multidentate ligands.3. Recent developments in gel permeation chromatography, temperature-rising fractionation, and crystallization fractionation provided the first reliable information about differences between various active centers in transition-metal catalysts.4. A rapid development of high-resolution 13C NMR spectroscopy resulted in greatly expanded understanding of the chemical and steric features of polyolefins and alkene copolymers. These developments require a new review of all aspects of alkene polymerization reactions with transition-metal catalysts. The first chapter in the book is an introductory text for researchers who are entering the field. It describes the basic principles of polymerization reactions with transition-metal catalysts, the types of catalysts, and commercially manufactured polyolefins. The next chapter addresses the principal issue of alkene polymerization catalysis: the existence of catalyst systems with single and multiple types of active centers. The subsequent chapters are devoted to chemistry and stereochemistry of elemental reaction steps, structures of catalyst precursors and reactions leading to the formation of active centers, kinetics of polymerization reactions, and their mechanisms.The book describes the latest commercial polymerization catalysts for the synthesis of polyethylenes and polypropylene The book provides a detailed description of the multi-center nature of commercial Ziegler-Natta catalysts. The book devotes specialized chapters to the most important aspects of transition metal polymerization catalysts: the reactions leading to the formation of active centers, the chemistry and stereochemistry of elemental polymerization steps, reaction kinetics, and the polymerization mechanism. The book contains an introductory chapter for researchers who are entering the field of polymerization catalysis. It describes the basic principles of polymerization reactions with transition-metal catalysts and the types of commercially manufactured polyolefins and copolymersThe book contains over 2000 references, the most recent up to end of 2006.

Download or read book Polyolefins 50 years after Ziegler and Natta I written by Walter Kaminsky and published by Springer. This book was released on 2013-12-19 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.

Download or read book Catalytic Polymerization of Cycloolefins written by V. Dragutan and published by Elsevier. This book was released on 2000-06-26 with total page 1293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most important topics concerning cationic Ziegler-Natta and ring-opening metathesis polymerization of cycloolefins. The work describes the major pathways that cycloolefins can follow under the action of specific catalytic systems, essentially vinyl and ring-opening polymerization, both reaction types allowing the manufacture of distinct products with wide applicability in modern technologies. The comprehensive data available on this subject are logically and systematically selected and reviewed throughout 18 chapters, according to the basic catalytic processes involved, types of monomers and catalysts employed, reaction conditions and application fields. The modern trends in design of chiral metallocene catalysts, well-defined living metathesis catalysts, catalysts tolerant toward functionalities and water systems are highlighted. The book discusses in detail the relevant aspects of these processes including reaction thermodynamics, kinetics, mechanisms and stereochemistry and correlates the structure of produced polymers with their chemical and physical-mechanical properties. Related important topics include Ziegler-Natta polymerization of olefins and dienes, atom transfer radical polymerization of vinyl compounds, metathesis of olefins and acetylenes, acyclic diene metathesis reaction, carbonyl olefination reaction, metathesis polymerization of acetylenes, metathesis degradation of polymers and ring-opening polymerization of heterocycles. Special emphasis is laid upon the manufacture of commerical products, new polymers and copolymers of potential interest for industry and design and synthesis of speciality polymers with particular structures and architectures and desired properties. The book critically evaluates the most recent achievements reported in this field and outlines the modern trends on the research and application of the catalytic processes for cycloolefin polymerization. For the first time, comprehensive information about the published data on the subject up to now is provided for both academic and industrial researchers working in the areas of polymer chemistry, organic and organometallic chemistry, surface science and catalysis, petrochemistry and chemical engineering. This stimulating book offers an enlightening introduction and a quick documentation on the subject as well as a solid background in this field. Moreover, the work offers a wealth of useful information for specialists applying polymers in various scientific and industrial areas.

Download or read book Aspen Plus written by Kamal I. M. Al-Malah and published by John Wiley & Sons. This book was released on 2022-10-12 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: ASPEN PLUS® Comprehensive resource covering Aspen Plus V12.1 and demonstrating how to implement the program in versatile chemical process industries Aspen Plus®: Chemical Engineering Applications facilitates the process of learning and later mastering Aspen Plus®, the market-leading chemical process modeling software, with step-by-step examples and succinct explanations. The text enables readers to identify solutions to various process engineering problems via screenshots of the Aspen Plus® platforms in parallel with the related text. To aid in information retention, the text includes end-of-chapter problems and term project problems, online exam and quiz problems for instructors that are parametrized (i.e., adjustable) so that each student will have a standalone version, and extra online material for students, such as Aspen Plus®-related files, that are used in the working tutorials throughout the entire textbook. The second edition of Aspen Plus®: Chemical Engineering Applications includes information on: Various new features that were embedded into Aspen Plus V12.1 and existing features which have been modified Aspen Custom Modeler (ACM), covering basic features to show how to merge customized models into Aspen Plus simulator New updates to process dynamics and control and process economic analysis since the first edition was published Vital areas of interest in relation to the software, such as polymerization, drug solubility, solids handling, safety measures, and energy saving For chemical engineering students and industry professionals, the second edition of Aspen Plus®: Chemical Engineering Applications is a key resource for understanding Aspen Plus and the new features that were added in version 12.1 of the software. Many supplementary learning resources help aid the reader with information retention.

Download or read book Neodymium Based Ziegler Catalysts Fundamental Chemistry written by Oskar Nuyken and published by Springer Science & Business Media. This book was released on 2006-10-05 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of the vast number of patents and publications mainly issued duringthelastdecade, acomprehensivereviewthatcoversthescienti?caswell as the patent literature has been missing until now. In this volume we try to review the available literature by two independent approaches to Nd and Ln-catalyzed diene polymerizations. In the?rst part of thevolume, whichisentitled"Neodymium-Based Ziegler/NattaCatalystsand their Application in Diene Polymerization", a polymer chemist's view is given with strong emphasis on Nd-based catalyst systems. Also technological and industrialaspectsofNd-catalyzeddienepolymerizationsareaddressed. Inthe secondpartofthevolume, whichisentitled"Rare-EarthMetalsandAluminum Getting Close in Ziegler-type Organometallics", a more organometallic p- spective isgivenandLn-based catalystsystems areaddressed

Download or read book Polyolefin Reaction Engineering written by Joao B. P. Soares and published by John Wiley & Sons. This book was released on 2013-10-02 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monomers composed of carbon and hydrogen atoms are the simple building blocks that make up polyolefins - molecules which are extremely useful and which have an extraordinary range of properties and applications. How these monomer molecules are connected in the polymer chain defines the molecular architecture of polyolefins. Written by two world-renowned authors pooling their experience from industry and academia, this book adopts a unique engineering approach using elegant mathematical modeling techniques to relate polymerization conditions, reactor and catalyst type to polyolefin properties. Readers thus learn how to design and optimize polymerization conditions to produce polyolefins with a given microstructure, and how different types of reactors and processes are used to create the different products. Aimed at polymer chemists, plastics technologists, process engineers,the plastics industry, chemical engineers, materials scientists, and company libraries.

Download or read book Stereospecific Polymerization of Isoprene written by Elena Ceausescu and published by Elsevier. This book was released on 2013-10-22 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stereospecific Polymerization of Isoprene, a doctoral dissertation by Dr. Elena Ceausescu, is a study of the synthesis of cis-l, 4-polyisoprene rubber, an elastomer of synthetic rubber whose structure and properties are similar to that of natural rubber. This elastomer is primarily used in the manufacture of tires, belts, hoses, matting, flooring, dampeners, and other synthetic rubber goods. The book is organized into two parts. Part I, the Ph.D. thesis, focuses on the explanation and exposition of the polymerization reaction; properties of the polymer; and certain theoretical aspects related to the polymer's reaction mechanism and kinetics. Part II presents data derived from an extensive variety of experiments and tests intended to serve as a basis for the industrial production of cis-l, 4-polyisoprene rubber. The text will be an interesting book for materials engineers, industrial engineers, chemists, and science students engaged in the study of polymers.

Download or read book Stereoregular Polymers and Stereospecific Polymerizations written by Giulio Natta and published by Elsevier. This book was released on 2013-10-22 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stereoregular Polymers and Stereospecific Polymerizations: The Contributions of Guilio Natta and his School to Polymer Chemistry, Volume 1 covers the developments in understanding the reactions, nomenclature, and physico-chemical properties of polymers. This volume is composed of 82 chapters, and starts with surveys of the synthesis and crystal structure of polymers. Significant chapters are devoted to the characterization of crystalline polymers, with emphasis on the determination of their viscosity and molecular weight. Other chapters deal with stereospecific polymers of olefins, mechanism of stereospecific catalysis, reaction kinetics. This volume also considers the polymerization of synthetic elastomers and the copolymerization of olefins, as well as their reaction kinetics. The remaining chapters describe the X-ray characterization of isotactic polymers. This book is directed toward polymer chemists.