Download or read book Kinetics of Recrystallization in Adiabatic Shear Bands written by Joy Adair Hines and published by . This book was released on 1996 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adiabatic Shear Localization written by Bradley Dodd and published by Elsevier. This book was released on 2012-05-22 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adiabatic shear localization is a mode of failure that occurs in dynamic loading. It is characterized by thermal softening occurring over a very narrow region of a material and is usually a precursor to ductile fracture and catastrophic failure. This reference source is the revised and updated version of the first detailed study of the mechanics and modes of adiabatic shear localization in solids. Building on the success of the first edition, the book provides a systematic description of a number of aspects of adiabatic shear banding. The concepts and techniques described in this work can usefully be applied to solve a multitude of problems encountered by those investigating fracture and damage in materials, impact dynamics, metal working and other areas. Specific chapters focus on energetic materials, polymers, bulk metal glasses, and the mathematics of shear banding as well as the numerical modeling of them. With its detailed coverage of the subject, this book is of great interest to academics and researchers into materials performance as well as professionals. - Up-to-date coverage of the subject and research that has occurred over the past 20 years - Each chapter is written on a different sub-field of adiabatic shear by an acknowledged expert in the field - Detailed and clear discussions of each aspect
Download or read book Dynamic Failure of Materials and Structures written by Arun Shukla and published by Springer Science & Business Media. This book was released on 2009-10-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Failure of Materials and Structures discusses the topic of dynamic loadings and their effect on material and structural failure. Since dynamic loading problems are very difficult as compared to their static counterpart, very little information is currently available about dynamic behavior of materials and structures. Topics covered include the response of both metallic as well as polymeric composite materials to blast loading and shock loadings, impact loadings and failure of novel materials under more controlled dynamic loads. These include response of soft materials that are important in practical use but have very limited information available on their dynamic response. Dynamic fragmentation, which has re-emerged in recent years has also been included. Both experimental as well as numerical aspects of material and structural response to dynamic loads are discussed. Written by several key experts in the field, Dynamic Failure of Materials and Structures will appeal to graduate students and researchers studying dynamic loadings within mechanical and civil engineering, as well as in physics and materials science.
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Introduction to Adiabatic Shear Localization written by Bradley Dodd and published by . This book was released on 2015 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Localized deformation in the form of narrow shear bands are often observed to develop after larger plastic deformations in metals, polymers and powders. Shear bands, being a form of large plastic deformation, are usually the precursors of ductile fracture. Therefore, an improved knowledge of localized deformation, including instability, shear bands, damage and fracture, play a particularly significant role in a wide variety of engineering topics. One example is material processing. Since the 1970s shear banding has been extensively studied by mechanical and metallurgical engineers. There is a pressing requirement in physics and engineering to summarize the knowledge gained and to assist students and researchers to apply this knowledge in their respective areas of technology. This book is an invaluable reference source on the topic of adiabatic shear localization. It provides a systematic description of various aspects of adiabatic shear banding, and the various case studies describe the ways in which the knowledge of adiabatic shear localization can be used in several applications. In this way, readers can easily follow the different approaches and transfer concepts and techniques to help solve the problems they encounter in their own fields of interest.
Download or read book Hot Working Guide written by Y. V. R. K. Prasad and published by ASM International. This book was released on 1997-01-01 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique source book with flow stress data for hot working, processing maps with metallurgical interpretation and optimum processing conditions for metals, alloys, intermetallics, and metal matrix composites. The use of this book replaces the expensive and time consuming trial and error methods in process design and product development.
Download or read book Proceedings of the 14th International Conference on the Technology of Plasticity Current Trends in the Technology of Plasticity written by Katia Mocellin and published by Springer Nature. This book was released on 2023-09-19 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of metal forming, as presented by leading international researchers and engineers at the 14th International Conference on Technology of Plasticity (ICTP), held in Mandelieu-La Napoule, France on September 24-29, 2023. It covers a diverse range of topics such as manufacturing processes & equipment, materials behavior and characterization, microstructure design by forming, surfaces & interfaces, control & optimization, green / sustainable metal forming technologies, digitalization & AI in metal forming, multi-material processing, agile / flexible metal forming processes, forming of non-metallic materials, micro-forming and luxury applications. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 1997 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot Working Guide A Compendium of Processing Maps Second Edition written by Y.V.R.K. Prasad; K.P. Rao; S. Sasidhar and published by ASM International. This book was released on 2015-08-01 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot Working Guide: A Compendium of Processing Maps, Second Edition is a unique source book with flow stress data for hot working, processing maps with metallurgical interpretation and optimum processing conditions for metals, alloys, intermetallics, and metal matrix composites. The use of this book replaces the expensive and time consuming trial and error methods in process design and product development.
Download or read book Boundary and Mixed Lubrication Science and Applications written by D. Dowson and published by . This book was released on 2002-07-10 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Session headings. Keynote address and invited paper. Boundary lubrication 1. Boundary lubrication 2. Mixed lubrication. Lubricants 1. Lubricants 2. Nano-boundary lubrication and molecular dynamics. Coatings. Dry wear. Lubricated wear. Bio-tribology- total replacement hip joints. Elastohydrodynamic lubrication. Friction 1. Bearings. Friction 2. Mechanical systems.
Download or read book Solid State Metal Additive Manufacturing written by Hang Z. Yu and published by John Wiley & Sons. This book was released on 2024-04-16 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid-State Metal Additive Manufacturing Timely summary of state-of-the-art solid-state metal 3D printing technologies, focusing on fundamental processing science and industrial applications Solid-State Metal Additive Manufacturing: Physics, Processes, Mechanical Properties, and Applications provides detailed and in-depth discussion on different solid-state metal additive manufacturing processes and applications, presenting associated methods, mechanisms and models, and unique benefits, as well as a detailed comparison to traditional fusion-based metal additive manufacturing. The text begins with a high-level overview of solid-state metal additive manufacturing with an emphasis on its position within the metal additive manufacturing spectrum and its potential for meeting specific demands in the aerospace, automotive, and defense industries. Next, each of the four categories of solid-state additive technologies—cold spray additive manufacturing, additive friction stir deposition, ultrasonic additive manufacturing, and sintering-based processes—is discussed in depth, reviewing advances in processing science, metallurgical science, and innovative applications. Finally, the future directions of these solid-state processes, especially the material innovation and artificial intelligence aspects, are discussed. Sample topics covered in Solid-State Metal Additive Manufacturing include: Physical processes and bonding mechanisms in impact-induced bonding and microstructures and microstructural evolution in cold sprayed materials Process fundamentals, dynamic microstructure evolution, and potential industrial applications of additive friction stir deposition Microstructural and mechanical characterization and industrial applications of ultrasonic additive manufacturing Principles of solid-state sintering, binder jetting-based metal printing, and sintering-based metal additive manufacturing methods for magnetic materials Critical issues inherent to melting and solidification, such as porosity, high residual stress, cast microstructure, anisotropic mechanical properties, and hot cracking Solid-State Metal Additive Manufacturing is an essential reference on the subject for academic researchers in materials science, mechanical, and biomedicine, as well as professional engineers in various manufacturing industries, especially those involved in building new additive technologies.
Download or read book Metallurgical and Materials Applications of Shock wave and High strain rate Phenomena written by Lawrence Eugene Murr and published by Elsevier Publishing Company. This book was released on 1995 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work, with emphasis on materials applications and effects, overviews recent research in the metallurgical materials applications of shock-wave and high-strain-rate phenomena. It may be used as a general reference tool and teaching component dealing with dynamic effects in materials.
Download or read book Research in Progress written by and published by . This book was released on 1982 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Initiation and Growth of Adiabatic Shear Bands written by T. W. Wright and published by . This book was released on 1985 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: A simple version of thermo/viscoplasticity theory is used to model the formation of adiabatic shear bands in high rate deformation of solids. The one dimensional shearing deformation of a finite slab is considered. For the constitutive assumptions made in this paper, homogeneous shearing produces a stress/strain response curve that always has a maximum when strain and rate hardening, plastic heating, and thermal softening are taken into account. Shear bands form if a perturbation is added to the homogeneous fields just before peak stress is obtained with these new fields being used as initial conditions. The resulting initial/boundary value problem is solved by the finite element method for one set of material parameters. The shear band grows slowly at first, then accelerates sharply, until finally the plastic strain rate in the center reaches a maximum, followed by a slow decline. Stress drops rapidly throughout the slab, and the central temperature increases rapidly as the peak in strain rate develops.
Download or read book Metallurgical Applications of Shock Wave and High Strain Rate Phenomena written by Murr and published by CRC Press. This book was released on 1986-06-06 with total page 1134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing metallurgical and materials applications of shock-wave and high-strain-rate phenomena, this superb volume presents the work of the leading international authorities who examine the state of the art of explosive and related technologies in the context of metallurgical and materials processing and fabrication.
Download or read book About the Relation of Recrystallization Kinetics with the Relaxation of Tensions in Metals written by L. N. Aleksandrov and published by . This book was released on 1966 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization and Grain Growth written by B. Bacroix and published by . This book was released on 2004 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
