Download or read book Kinetics of Metal Gas Interactions at Low Temperatures written by Eckehard Fromm and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents experimental data and recent results of model calculations on the formation of natural oxide film on metal surfaces and of metal hydride formation. Such films are responsible for corrosion, friction, and wear of metallic materials. Describing mostly the authors own research, this monograph gives an overview of models suitable for metal-gas reactions and demonstrates how complex metal-gas interactions can be analyzed by standard procedures of chemical kinetics. The book, and the data and equations it contains, will be useful to researchers in surface science, condensed-matter physics, and materials science.
Download or read book Introduction to the High Temperature Oxidation of Metals written by Neil Birks and published by Cambridge University Press. This book was released on 2009-07-16 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: A straightforward treatment describing the oxidation processes of metals and alloys at elevated temperatures. This 2006 second edition retains the fundamental theory but incorporates advances made in understanding degradation phenomena. The first half provides an authoritative introduction to the basic principles, covering thermodynamics and mechanisms of high temperature corrosion of metals and alloys. The latter half extends the discussion to oxidation processes in complex systems, from reactions in mixed environments to protective techniques, including coatings and atmosphere control. The authors provide a logical and expert treatment of the subject, producing a revised edition that will be a comprehensive guide to material scientists and engineers requiring an understanding of this elementary process.
Download or read book High Temperature Oxidation and Corrosion of Metals written by David John Young and published by Elsevier. This book was released on 2008-10-03 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is concerned with understanding the fundamental mechanisms of high temperature alloy oxidation. It uses this understanding to develop methods of predicting oxidation rates and the way they change with temperature, gas chemistry and alloy composition. The focus is on designing (or selecting) alloy compositions which provide optimal resistance to attack by corrosive gases. . Emphasises quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities and alloy compositions. . Uses phase diagrams and diffusion paths to analyse and interpret scale structures and internal precipitation distributions . Provides a detailed examination of corrosion in industrial gases (water vapour effects, carburisation and metal dusting, sulphidation) . Text is well supported by numerous micrographs, phase diagrams and tabulations of relevant thermodynamic and kinetic data . Combines physical chemistry and materials science methodologies.
Download or read book Low Temperature Oxidation written by Francis P. Fehlner and published by Wiley-Interscience. This book was released on 1986 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: An interdisciplinary study of the corrosion of metals that emphasizes the role of oxide structure in interpreting oxidation kinetics of metals and semiconductors. Covers low temperature oxidation, silicon oxidation, structure of vitreous oxides, transport processes in vitreous oxides, and oxide films. Index.
Download or read book Chemical Kinetics of Solids written by Hermann Schmalzried and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many different chemical processes take place inside solids or at solid surfaces and interfaces. However, their quantitative description sometimes seems difficult to understand. This book by Professor Schmalzried, author of the eminently successful Solid State Reactions; bridges the gap between the 'physical' and 'chemical' approaches to this subject because it is written in a language which both sides understand. For the first time, a comprehensive coverage of the rapidly developing field of Solid State Kinetics is available. The topics covered in this book go far beyond diffusional transport. Homogeneous and heterogeneous solid-state reactions, phase transitions or the influence of external fields are also treated in detail. With this background, the author explains e.g. charge transport mechanisms in ionic conductors, principles of sensor technology, or oxidation processes clearly and comprehensibly. This book is a must for every solid-state chemist and an indispensable tool for academic and industrial readers alike. From reviews: 'a first-rate reference work that a must for any science library' (J. Am Chem. Soc.) 'can be recommended without restrictions ...' (Z. Phys. Chem.)
Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings.Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials.This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. - Describes the latest developments in understanding high temperature corrosion - Presents the latest research by the leading innovators from around the globe - Case studies are provided to illustrate key points
Download or read book High temperature Oxidation of Metals written by Per Kofstad and published by . This book was released on 1966 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research on Nitrification and Related Processes Part A written by Martin G. Klotz and published by Academic Press. This book was released on 2011-01-10 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art update on methods and protocols dealing with the detection, isolation and characterization of macromolecules and their hosting organisms that facilitate nitrification and related processes in the nitrogen cycle as well as the challenges of doing so in very diverse environments. Provides state-of-the-art update on methods and protocols Deals with the detection, isolation and characterization of macromolecules and their hosting organisms Deals with the challenges of very diverse environments
Download or read book Theory of Metal Oxidation written by A. T. Fromhold and published by Elsevier Science & Technology. This book was released on 1980 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oxidation of Tungsten written by Vincent David Barth and published by . This book was released on 1961 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report presents a detailed review of available information on the oxidation of W and its alloys. W is relatively inert below 700 C. As the temperature is increased above this level, however, oxidation becomes progressively more rapid, reaching catastrophic rates at temperatures around 1200 C and above. Various theories for the mechanism and rates of W oxidation at different temperatures are reviewed, and the effect of pressure and water vapor on the stability of W oxides is discussed in detail. The elevatedtemperature reactions of W with other materials, such as refractory oxides, and with gases other than oxygen also are covered. Information on the protection of W by alloying and coating is included. (Author).
Download or read book Corrosion and Surface Chemistry of Metals written by Dieter Landolt and published by EPFL Press. This book was released on 2007-05-02 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook; grad.
Download or read book TMS 2020 149th Annual Meeting Exhibition Supplemental Proceedings written by The Minerals, Metals & Materials Society and published by Springer Nature. This book was released on 2020-02-13 with total page 2046 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from the 149th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.
Download or read book The Oxidation of Metals and Alloys written by Erich Scheil and published by . This book was released on 1952 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper reviews the various types of oxidation processes occurring with pure metals and gives explanations for the varying time-temperature-oxidation rate relations that exist for copper, tungsten, zinc, cadmium, and tantalum. The effect of shape and crystal structure on oxidation is discussed. Principles derived are applied to the oxidation of alloys.
Download or read book Kinetics and Mechanism of Reactions of Transition Metal Complexes written by Ralph G. Wilkins and published by . This book was released on 2002 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to High Temperature Oxidation and Corrosion written by A. S. Khanna and published by ASM International. This book was released on 2002-01-01 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text for graduate and post graduate students covers fundamentals of high temperature corrosion and related topics. Early chapters cover the thermodynamics and kinetics of oxidation and defect structure of oxides and diffusion in oxides, and later chapters cover thin and thick layer oxidation, o
Download or read book Solid State Chemistry Selected Papers Of C N R Rao written by S K Joshi and published by World Scientific. This book was released on 1995-02-28 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid State Chemistry today is a frontier area of mainstream chemistry, and plays a vital role in the development of materials. The present work, consisting of a selection of Prof. C N R Rao's papers, covers most of the important aspects of solid state chemistry and provides the flavor of the subject, showing how the subject has evolved over the years. The book is up-to-date, and will be useful to students, teachers, beginning researchers and practitioners in solid state chemistry as well as in the broader area of materials science.
Download or read book C H N and O in Si and Characterization and Simulation of Materials and Processes written by A. Borghesi and published by North Holland. This book was released on 1996 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 200 papers, this volume contains the proceedings of two symposia in the E-MRS series. Part I presents a state of the art review of the topic - Carbon, Hydrogen, Nitrogen and Oxygen in Silicon and in Other Elemental Semiconductors. There was strong representation from the industrial laboratories, illustrating that the topic is highly relevant for the semiconductor industry.The second part of the volume deals with a topic which is undergoing a process of convergence with two concerns that are more particularly application oriented. Firstly, the advanced instrumentation which, through the use of atomic force and tunnel microscopies, high resolution electron microscopy and other high precision analysis instruments, now allows for direct access to atomic mechanisms. Secondly, the technological development which in all areas of applications, particularly in the field of microelectronics and microsystems, requires as a result of the miniaturisation race, a precise mastery of the microscopic mechanisms.
