Download or read book Higher Education and Research in the Netherlands written by and published by . This book was released on 1972 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Broadband Dielectric Spectroscopy written by Friedrich Kremer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both an introductory course to broadband dielectric spectroscopy and a monograph describing recent dielectric contributions to current topics, this book is the first to cover the topic and has been hotly awaited by the scientific community.

Download or read book Encyclopedia of Polymer Blends Volume 3 written by Avraam I. Isayev and published by John Wiley & Sons. This book was released on 2016-06-07 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete and timely overview of the topic, this Encyclopedia imparts knowledge of fundamental principles and their applications for academicians, scientists and researchers, while informing engineers, industrialists and entrepreneurs of the current state of the technology and its utilization. The most comprehensive source on polymer blends available on the market Offers a complete and timely overview of the topic Each article presents up to date research & development on a topic and its basic principles and applications, integrates case studies, laboratory and pilot plant experiments, and gives due reference to published and patented literature Equips academics, scientists and researchers with knowledge of fundamentals principles and their applications, and informs the engineers, industrialists and entrepreneurs about the state of the art technology and its applications

Download or read book Solid State Polymerization written by Constantine D. Papaspyrides and published by John Wiley & Sons. This book was released on 2009-04-27 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most current guide to solid state polymerization Solid State Polymerization (SSP)is an indispensable tool in the design, manufacture, and study of polymers, plastics, and fibers. SSP presents significant advantages over other polymerization techniques due to low operating temperatures, inexpensive equipment, and simple and environmentally sound procedures. Combining fundamentals of polymer science, chemistry, physical chemistry, and engineering, SSP also offers many research applications for a wide range of students and investigators. Gathering and filtering the latest literature on SSP, Solid Solid State Polymerization offers a unique, one-stop resource on this important process. With chapters contributed by leaders in the field, this text summarizes SSP, and provides essential coverage that includes: An introduction to SSP, with chemical and physical steps, apparatus, advantages, and parameters SSP physical chemistry and mechanisms Kinetic aspects of polyesters and polyamides SSP Catalysis in SSP processes Application of SSP under high pressure conditions in the laboratory Engineering aspects regarding process modeling and industrial application Recent developments and future possibilities Solid State Polymerization provides the most up-to-date coverage of this constantly developing field to academic and industry professionals, as well as graduate and postgraduate-level students in chemical engineering, materials science and engineering, polymer chemistry, polymer processing and polymer engineering.

Download or read book Introduction to Physical Polymer Science written by Leslie H. Sperling and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Updated Edition of the Classic Text Polymers constitute the basis for the plastics, rubber, adhesives, fiber, and coating industries. The Fourth Edition of Introduction to Physical Polymer Science acknowledges the industrial success of polymers and the advancements made in the field while continuing to deliver the comprehensive introduction to polymer science that made its predecessors classic texts. The Fourth Edition continues its coverage of amorphous and crystalline materials, glass transitions, rubber elasticity, and mechanical behavior, and offers updated discussions of polymer blends, composites, and interfaces, as well as such basics as molecular weight determination. Thus, interrelationships among molecular structure, morphology, and mechanical behavior of polymers continue to provide much of the value of the book. Newly introduced topics include: Nanocomposites, including carbon nanotubes and exfoliated montmorillonite clays The structure, motions, and functions of DNA and proteins, as well as the interfaces of polymeric biomaterials with living organisms The glass transition behavior of nano-thin plastic films In addition, new sections have been included on fire retardancy, friction and wear, optical tweezers, and more. Introduction to Physical Polymer Science, Fourth Edition provides both an essential introduction to the field as well as an entry point to the latest research and developments in polymer science and engineering, making it an indispensable text for chemistry, chemical engineering, materials science and engineering, and polymer science and engineering students and professionals.

Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.

Download or read book Mechanical and Thermophysical Properties of Polymer Liquid Crystals written by Witold Brostow and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: may never overcome the effects of hysteresis and stress (see Chapters 6 and 12). The first sentence of the reference work, Handbook of Liquid Crystals, reads: The terms liquid crystals, crystalline liquid, mesophase, and mesomorphous state are used synonymously to describe a state of aggregation that exhibits a molecular order in a size range similar to that of a crystal but acts more or less as a viscous liquid: [2] In other words, molecules within a liquid crystalline phase possess some orientational order and lack positional order; furthermore, the shape of a liquid crystalline sample is determined by the vessel in which it is contained rather than by the orientational order of its aggregated molecules. The authors recognized the limitations and imprecision of this definition but, like others preceding them, could not devise a simple and generally applicable one that is better. Regardless, the terms 'liquid crystal' and 'mesophase' should not be used interchangeably. As mentioned above, all liquid crystals are mesophases, but all mesophases are not liquid crystals. Recent studies, employing elaborate and sophisticated analytical techniques, have permitted finer distinctions between classical crystals and mesophases. At the same time, they have made definitions like that from the Handbook of Liquid Crystals somewhat obsolete for reasons other than terminology. One part of the problem arises from the use of a combination of bulk properties (like flow) and microscopic properties (like molecular ordering) within the same definition.

Download or read book Polymer Synthesis Theory and Practice written by Dietrich Braun and published by Springer Science & Business Media. This book was released on 2006-10-14 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first English edition of this book was pubUshed in 1971 with the late Prof. Dr. Werner Kern as coauthor. In 1997, for the preparation of the third edition, Prof. Dr. Helmut Ritter joined the team of authors and in 2001 Prof. Dr. Brigitte Voit and Prof. Dr. Matthias Rehahn complemented this team. The change in authors has not altered the basic concept of this 4th edition: again we were not aimed at compiling a comprehensive collection of recipes. In stead, we attempted to reach a broader description of the general methods and techniques for the synthesis, modification, and characterization of macromo- cules, supplemented by 105 selected and detailed experiments and by sufficient theoretical treatment so that no additional textbook be needed in order to under stand the experiments. In addition to the preparative aspects we have also tried to give the reader an impression of the relation of chemical structure and mor phology of polymers to their properties, as well as of areas of their application.

Download or read book Polymer Crystallization written by Jerold M. Schultz and published by . This book was released on 2001 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Table of contents

Download or read book Introduction to Soft Matter written by Ian W. Hamley and published by John Wiley & Sons. This book was released on 2013-03-18 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to this exciting and relativelynew subject with chapters covering natural and synthetic polymers,colloids, surfactants and liquid crystals highlighting the many andvaried applications of these materials. Written by an expert in thefield, this book will be an essential reference for people workingin both industry and academia and will aid in understanding of thisincreasingly popular topic. Contains a new chapter on biological soft matter Newly edited and updated chapters including updated coverageof recent aspects of polymer science. Contain problems at the end of each chapter to facilitateunderstanding

Download or read book Dielectric Polymer Nanocomposites written by J. Keith Nelson and published by Springer Science & Business Media. This book was released on 2009-12-17 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dielectric Polymer Nanocomposites provides the first in-depth discussion of nano-dielectrics, an emerging and fast moving topic in electrical insulation. The text begins with an overview of the background, principles and promise of nanodielectrics, followed by a discussion of the processing of nanocomposites and then proceeds with special considerations of clay based processes, mechanical, thermal and electric properties and surface properties as well as erosion resistance. Carbon nanotubes are discussed as a means of creation of non linear conductivity, the text concludes with a industrial applications perspective.

Download or read book Science and Technology of Rubber written by James E. Mark and published by Elsevier. This book was released on 2011-07-28 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Rubber, Third Edition provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling.

Download or read book Organic and Physical Chemistry of Polymers written by Yves Gnanou and published by John Wiley & Sons. This book was released on 2008-03-03 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic and Physical Chemistry of Polymers provides a thorough introduction to the fundamentals of polymers, including their structure and synthesis as well as their chemical and physical properties. This accessible guide illuminates the increasingly important role of polymers in modern chemistry, beginning with the essentials, then covering thermodynamics, conformation, morphology, and measurements of molar masses; polymerization mechanisms, reaction of polymers, synthesis of block and graft polymers, and complex topologies; and the mechanical properties, rheology, polymer processing, and fabrication of fibers and films.

Download or read book Textbook of Polymer Science written by Fred W. Billmeyer and published by John Wiley & Sons. This book was released on 1984-03-21 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition of the classic, best-selling polymer science textbook surveys theory and practice of all major phases of polymer science, engineering, and technology, including polymerization, solution theory, fractionation and molecular-weight measurement, solid-state properties, structure-property relationships, and the preparation, fabrication and properties of commercially-important plastics, fibers, and elastomers.

Download or read book Solid State Characterization of Pharmaceuticals written by Richard A. Storey and published by John Wiley & Sons. This book was released on 2011-03-31 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of solid state characterization is central to the pharmaceutical industry, as drug products are, in an overwhelming number of cases, produced as solid materials. Selection of the optimum solid form is a critical aspect of the development of pharmaceutical compounds, due to their ability to exist in more than one form or crystal structure (polymorphism). These polymorphs exhibit different physical properties which can affect their biopharmaceutical properties. This book provides an up-to-date review of the current techniques used to characterize pharmaceutical solids. Ensuring balanced, practical coverage with industrial relevance, it covers a range of key applications in the field. The following topics are included: Physical properties and processes Thermodynamics Intellectual guidance X-ray diffraction Spectroscopy Microscopy Particle sizing Mechanical properties Vapour sorption Thermal analysis & Calorimetry Polymorph prediction Form selection

Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.

Download or read book Crystallization Modalities in Polymer Melt Processing written by Hermann Janeschitz-Kriegl and published by Springer. This book was released on 2014-10-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structure formation in crystallizing polymers, as occurring during processing, has not been treated so far in a coherent form. This fact explains, why this monograph is written as the ?rst book devoted to this subject. A quarter of a century ago the underdevelopment of this subject was obvious. Trial and error dominated. In fact, other apposite subjects as polymer melt rheology or heat transfer, had reached high levels. A great number of books has been devoted to them. Mold ?lling of amorphous polymers and the solidi?cation of these polymers by vitri?cation can nowadays be simulated numerically with a high degree of accuracy. In the solidi?ed sample even residual stresses and corresponding birefringence effects can accurately be 1 calculated . However, semicrystalline polymers, which form the majority of industrial po- mers, have been excluded from these considerations for good reasons. In fact, great uncertainties existed about the formation of quality determining crystalline str- tures. In particular, polyole?ns suffered from this shortcoming. In 1983 this fact instigated the polymer research group at the Johannes Kepler University in Linz to start with pertinent activities. The urgency of this kind of studies becomes evident, if advantages and hitches of these polymers are considered. 1. Versatility of processing: Injection molding into a great variety of shapes and sizes, from thin walled beakers to garden chairs, not to forget pipe and pro?le extrusion, cable coating, ?ber spinning, ?lm blowing. 2. Product qualities: Ductility, low density, good electric insulation, corrosion resistance, surface quality.