Download or read book Catalysis By Gold written by Geoffrey C Bond and published by World Scientific. This book was released on 2006-08-15 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold has traditionally been regarded as inactive as a catalytic metal. However, the advent of nanoparticulate gold on high surface area oxide supports has demonstrated its high catalytic activity in many chemical reactions. Gold is active as a heterogeneous catalyst in both gas and liquid phases, and complexes catalyse reactions homogeneously in solution. Many of the reactions being studied will lead to new application areas for catalysis by gold in pollution control, chemical processing, sensors and fuel cell technology. This book describes the properties of gold, the methods for preparing gold catalysts and ways to characterise and use them effectively in reactions. The reaction mechanisms and reasons for the high activities are discussed and the applications for gold catalysis considered./a

Download or read book Kinetics of Catalytic Reactions written by M. Albert Vannice and published by Springer Science & Business Media. This book was released on 2006-04-09 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes how to conduct kinetic experiments with heterogeneous catalysts, analyze and model the results, and characterize the catalysts Detailed analysis of mass transfer in liquid phase reactions involving porous catalysts. Important to the fine chemicals and pharmaceutical industries so it has appeal to many researchers in both industry and academia (chemical engineering and chemistry departments

Download or read book Catalysis and Automotive Pollution Control written by A. Crucq and published by Elsevier. This book was released on 1987-04-01 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: In June 1984 the EEC Commission proposed new standards of permissible exhaust gas from motor vehicles to be introduced in Europe; these standards were approved by the Ministers of the Environment one year later. As the control of automotive pollution is at present mainly a catalytic problem, it was decided to hold an International Symposium on the subject, and an organizing committee composed of people engaged in catalytic research in the different Belgian Universities was constituted. This was the first Symposium of its kind to be held on an international level, and the quality and scientific interest of the papers presented was exceptional. It is planned to hold a follow-up Symposium in 2 to 3 years' time.The first part of the book is a general introduction to the problem of automotive pollution. The second, properly catalytic, part is devoted to fundamental and applied studies on pollution control, with emphasis on exhaust catalytic converters.

Download or read book Dynamics of Surfaces and Reaction Kinetics in Heterogeneous Catalysis written by G.F. Froment and published by Elsevier. This book was released on 1997-09-03 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many processes of the chemical industry are based upon heterogeneous catalysis. Two important items of these processes are the development of the catalyst itself and the design and optimization of the reactor. Both aspects would benefit from rigorous and accurate kinetic modeling, based upon information on the working catalyst gained from classical steady state experimentation, but also from studies using surface science techniques, from quantum chemical calculations providing more insight into possible reaction pathways and from transient experimentation dealing with reactions and reactors. This information is seldom combined into a kinetic model and into a quantitative description of the process. Generally the catalytic aspects are dealt with by chemists and by physicists, while the chemical engineers are called upon for mechanical aspects of the reactor design and its control. The symposium "Dynamics of Surfaces and Reaction Kinetics in Heterogeneous Catalysis" aims at illustrating a more global and concerted approach through a number of prestigious keynote lectures and severely screened oral and poster presentations.

Download or read book Kinetics of Chemical Reactions written by Guy B. Marin and published by John Wiley & Sons. This book was released on 2011-08-29 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This systematic presentation covers both experimental and theoretical kinetic methods, as well as fundamental and applied. The identification of dominant reaction paths, reaction intermediates and rate-determining steps allows a quantification of the effects of reaction conditions and catalyst properties, providing guidelines for catalyst optimization. In addition, the form in which the equations are presented allows for their straightforward implementation for scale-up and chemical reactor design purposes. Throughout, the methodologies given are illustrated by many examples.

Download or read book Perovskites and Related Mixed Oxides written by Pascal Granger and published by John Wiley & Sons. This book was released on 2016-02-23 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook and ready reference details all the main achievements in the field of perovskite-based and related mixed-oxide materials. The authors discuss, in an unbiased manner, the potentials as well as the challenges related to their use, thus offering new perspectives for research and development on both an academic and industrial level. The first volume begins by summarizing the different synthesis routes from molten salts at high temperatures to colloidal crystal template methods, before going on to focus on the physical properties of the resulting materials and their related applications in the fields of electronics, energy harvesting, and storage as well as electromechanics and superconductivity. The second volume is dedicated to the catalytic applications of perovskites and related mixed oxides, including, but not limited to total oxidation of hydrocarbons, dry reforming of methane and denitrogenation. The concluding section deals with the development of chemical reactors and novel perovskite-based applications, such as fuel cells and high-performance ceramic membranes. Throughout, the contributions clearly point out the intimate links between structure, properties and applications of these materials, making this an invaluable tool for materials scientists and for catalytic and physical chemists.

Download or read book Structured Catalysts and Reactors written by Andrzej Cybulski and published by CRC Press. This book was released on 2005-11-02 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in structured catalysts is steadily increasing due to the already proven, as well as potential, advantages of these catalysts. Updating the comprehensive coverage of the first edition published in 1998 with the latest science and applications, Structured Catalysts and Reactors, Second Edition gives detailed information on all aspect

Download or read book Engineering Solutions for CO2 Conversion written by Tomas Ramirez Reina and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide that offers a review of the current technologies that tackle CO2 emissions The race to reduce CO2 emissions continues to be an urgent global challenge. "Engineering Solutions for CO2 Conversion" offers a thorough guide to the most current technologies designed to mitigate CO2 emissions ranging from CO2 capture to CO2 utilization approaches. With contributions from an international panel representing a wide range of expertise, this book contains a multidisciplinary toolkit that covers the myriad aspects of CO2 conversion strategies. Comprehensive in scope, it explores the chemical, physical, engineering and economical facets of CO2 conversion. "Engineering Solutions for CO2 Conversion" explores a broad range of topics including linking CFD and process simulations, membranes technologies for efficient CO2 capture-conversion, biogas sweetening technologies, plasma-assisted conversion of CO2, and much more. This important resource: * Addresses a pressing concern of global environmental damage, caused by the greenhouse gases emissions from fossil fuels * Contains a review of the most current developments on the various aspects of CO2 capture and utilization strategies * Incldues information on chemical, physical, engineering and economical facets of CO2 capture and utilization * Offers in-depth insight into materials design, processing characterization, and computer modeling with respect to CO2 capture and conversion Written for catalytic chemists, electrochemists, process engineers, chemical engineers, chemists in industry, photochemists, environmental chemists, theoretical chemists, environmental officers, "Engineering Solutions for CO2 Conversion" provides the most current and expert information on the many aspects and challenges of CO2 conversion.

Download or read book Calorimetry and Thermal Methods in Catalysis written by Aline Auroux and published by Springer Science & Business Media. This book was released on 2013-09-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is about calorimetry and thermal analysis methods, alone or linked to other techniques, as applied to the characterization of catalysts, supports and adsorbents, and to the study of catalytic reactions in various domains: air and wastewater treatment, clean and renewable energies, refining of hydrocarbons, green chemistry, hydrogen production and storage. The book is intended to fill the gap between the basic thermodynamic and kinetics concepts acquired by students during their academic formation, and the use of experimental techniques such as thermal analysis and calorimetry to answer practical questions. Moreover, it supplies insights into the various thermal and calorimetric methods which can be employed in studies aimed at characterizing the physico-chemical properties of solid adsorbents, supports and catalysts, and the processes related to the adsorption desorption phenomena of the reactants and/or products of catalytic reactions. The book also covers the basic concepts for physico-chemical comprehension of the relevant phenomena. Thermodynamic and kinetic aspects of the catalytic reactions can be fruitfully investigated by means of thermal analysis and calorimetric methods, in order to better understand the sequence of the elemental steps in the catalysed reaction. So the fundamental theory behind the various thermal analysis and calorimetric techniques and methods also are illustrated.

Download or read book Interfacial Electrochemistry written by Andrzej Wieckowski and published by Routledge. This book was released on 2017-11-22 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text probes topics and reviews progress in interfacial electrochemistry. It supplies chapter abstracts to give readers a concise overview of individual subjects and there are more than 1500 drawings, photographs, micrographs, tables and equations. The 118 contributors are international scholars who present theory, experimentation and applications.

Download or read book Low Temperature CO Oxidation Catalysts for Long Life CO2 Lasers written by David R. Schryer and published by . This book was released on 1990 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Catalytic Combustion written by Sophie A. Cottilard and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic combustion has been developed as a method of promoting efficient combustion over a wide range of air-to-fuel ratios with a minimum pollutant formation at low temperatures as compared to conventional flame combustion. In this book, the authors present current research in the study of catalytic combustion including commercial and industrial research in combustion and fluidisation engineering; the catalytic combustion of soot; using metal oxides to improve catalytic efficiency; catalytic combustion in the removal of pollutants from exhaust gases and in the energy conversion field and the catalytic combustion of methane using ceria-zirconia.

Download or read book Kinetics of Chemical Reactions written by Guy B. Marin and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second, extended and updated edition presents the current state of kinetics of chemical reactions, combining basic knowledge with results recently obtained at the frontier of science. Special attention is paid to the problem of the chemical reaction complexity with theoretical and methodological concepts illustrated throughout by numerous examples taken from heterogeneous catalysis combustion and enzyme processes. Of great interest to graduate students in both chemistry and chemical engineering.

Download or read book Supported Metal Single Atom Catalysis written by Philippe Serp and published by Wiley-VCH. This book was released on 2022-02-22 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: b”Supported Metal Single Atom CatalysisCovers all key aspects of supported metal single atom catalysts, an invaluable resource for academic researchers and industry professionals alike Single atom catalysis is one of the most innovative and dynamic research areas in catalysis science. Supported metal catalysts are used extensively across the chemical industry, ranging from fine and bulk chemical production to petrochemicals. Single atom catalysts (SACs) combine the advantages of both homogeneous and heterogeneous catalysts such as catalyst stability, activity, and high dispersion of the active phase. Supported Metal Single Atom Catalysis provides an authoritative and up-to-date overview of the emerging field, covering the synthesis, preparation, characterization, modeling, and applications of SACs. This comprehensive volume introduces the basic principles of single atom catalysis, describes metal oxide and carbon support materials for SAC preparation, presents characterization techniques and theoretical calculations, and discusses SACs in areas including selective hydrogenation, oxidation reactions, activation of small molecules, C-C bond formation, and biomedical applications. Highlights the activity, selectivity, and stability advantages of supported metal SACs compared to other heterogeneous catalysts Covers applications of SACs in thermal catalysis, electrocatalysis, and photocatalysis Includes chapters on single atom alloys and supported double and triple metal atom catalysts Discusses the prospects, challenges, and potential industrial applications of SACs Supported Metal Single Atom Catalysis is an indispensable reference for all those working in the fields of catalysis, solid-state chemistry, materials science, and spectroscopy, including catalytic chemists, organic chemists, electrochemists, theoretical chemists, and industrial chemists.

Download or read book Kinetic Models for a Diesel Oxidation Catalyst written by Stephen John Salomons and published by Stephen Salomons. This book was released on 2008 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Chemistry in Biomedical and Environmental Science written by Jonathan P. Blitz and published by Springer Science & Business Media. This book was released on 2006-09-09 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume holds a special niche in describing the current state of the art in the fundamentals and applications of a variety of nanomaterials. A common theme throughout much of this volume involves adsorption and interfacial behavior of nanomaterials. The book provides a useful mixture of reviews and primary research from leading laboratories and offers a unique blend of East European and Western contributors.

Download or read book Third World Congress on Oxidation Catalysis written by S.T. Oyama and published by Elsevier. This book was released on 1997-09-12 with total page 1277 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overall theme of the 3rd World Congress is "Atom Efficient Catalytic Oxidations for Global Technologies". This theme was chosen to stimulate the participants to report their findings with an emphasis on conserving valuable material in their catalytic transformations, as well as conserving energy, in an environmentally responsible manner. Progress towards this stated goal is substantial as evidenced by the tremendous response of the community in their participation of quality publications complied in these Proceedings of the Congress.The subjects presented span a wide range of oxidation reactions and catalysts. These include the currently important area of lower alkane oxidation to the corresponding olefins, unsaturated aldehydes, acids and nitriles.The four featured lectures and seven plenary lectures constitute the general background and overview of the subject matter at hand. The 104 contributed papers and 13 poster manuscripts, summarized in this compendium, probe new avenues to achieve catalytically efficient oxidation reactions for the future needs of mankind in a global environment.