Download or read book Current Abstracts written by and published by . This book was released on 1994-07 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biomethanization of the Organic Fraction of Municipal Solid Wastes written by J. Mata-Alvarez and published by IWA Publishing. This book was released on 2002-08-31 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomethanization of the Organic Fraction of Municipal Solid Wastes is a comprehensive introduction to both the fundamentals and the more practical aspects of the anaerobic digestion of organic solid wastes, particularly those derived from households, that is, the organic fraction of municipal solid wastes (OFMSW). It can be used as a textbook for specialized courses and also as a guide for practitioners. In the first part, the book covers the relevant aspects of anaerobic digestion (AD) of organic wastes. The fundamentals and kinetic aspects of AD are reviewed with particular emphasis on the aspects related to solid wastes. This introduction is necessary to have a comprehensive view of the AD process and to understand the practical principles as well as the origin of possible problems arising from the management of the process. Chapter 2 emphasizes the role of kinetics in designing the reactor, paying special attention to existing models, particularly the dynamic ones. Through this introduction, it is intended to facilitate the technology transfer from laboratory or pilot plant experiences to full-scale process, in order to implement improvements in current digesters. Laboratory methods are described for the analysis and optimization of reactor performance, such as methanogenic activity tests or experimental evaluation of the biodegradation kinetics of solid organic waste. The different reaction patterns applied to industrial reactors are outlined. Industrial reactors are classified in accordance with the system they use, pointing out advantages and limitations. Co-digestion, enabling the co-treatment of organic wastes of different origin in a more economically feasible way, is described in detail. Examples of co-digestion are given, with OFMSW as a base-substrate. Finally, full-scale co-digestion plants are discussed. Various types (mechanical, biological, physico-chemical) of pre-treatment to increase the biodegradability, and thus the yields of the process, are reviewed in detail. The use of the fermentation products of anaerobic digesters for biological nutrient removal processes in wastewater treatment plants is described. This constitutes an example of integrated waste management, a field in which both economic and technical advances can be achieved. Balances are given to justify the approach, and a full-scale case study is presented. The important topic of economics and the ecological advantages of the process are emphasized. The use of compost, the integration with composting technology, and advantages over other technologies are detailed in the framework of an environmental impact assessment of biowaste treatment. Finally, the anaerobic digestion of MSW in landfills is reviewed in detail, with emphasis on landfill process enhancement and strategies for its application.

Download or read book Biogas Industrial written by Food and Agriculture Organization of the United Nations and published by Food & Agriculture Org.. This book was released on 2018-06-14 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: This user manual assists in the utilization of BEFSRA biogas industrial tool. Moreover, this manual provides useful definitions related to biogas digestor options, its operation and key parameters affecting production performance. After completing this manual and operate the tool, users will be able to perform the techno-economic analysis of biogas production and different potential uses for electricity generation, cogeneration of heat and power (CHP), direct use for heating and cooking or upgrade to natural gas. In this manual, users will be guided through a practical example on how to use the more than 450 feedstock options included in the database and that range from agriculture residues to common agro-industrial residues, for codigestion or seasonal operations. A correct use of manual and tool will provide an indication of production costs and investment; financial viability feedstock demand, and potential socio-economic benefits of biogas industrial plants. Biogas industrial manual is part of the Heat and Power submodule of Energy End Use Option in BEFS RA tools. This module builds up from the information generated in the Natural Resources modules in relation to feedstock. For a more detailed description of the module, refer to the general introduction of the training manual.

Download or read book Solid Substrate Cultivation written by H.W. Doelle and published by Springer. This book was released on 1992-11-30 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deepens the understanding of the solid substrate culture technique in order to widen the engineering base needed to encourage its practical use. Theories of practical relevance are explained in detail.

Download or read book Recycling of Solid Waste for Biofuels and Bio chemicals written by Obulisamy Parthiba Karthikeyan and published by Springer. This book was released on 2016-08-10 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest advances in and current research perspectives on the field of urban/industrial solid waste recycling for bio-energy and bio-fuel recovery. It chiefly focuses on five main thematic areas, namely bioreactor landfills coupled with energy and nutrient recovery; microbial insights into anaerobic digestion; greenhouse emission assessment; pyrolysis techniques for special waste treatment; and industrial waste stabilization options. In addition, it compiles the results of case studies and solid waste management perspectives from different countries.

Download or read book Anaerobic Digestion of Solid Waste written by F. Cecchi and published by IWA Publishing (International Water Assoc). This book was released on 1993-05-31 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is no description available for this title

Download or read book Applied Bioengineering written by Toshiomi Yoshida and published by John Wiley & Sons. This book was released on 2017-06-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the topic, highlighting recent developments, ongoing research trends and future directions. Experts from Europe, Asia and the US cover five core areas of imminent importance to the food, feed, pharmaceutical and water treatment industries in terms of sustainable and innovative processing and production. In the field of enzyme engineering, they summarize historic developments and provide an overview of molecular enzyme engineering, while also discussing key principles of microbial process engineering, including chapters on process development and control. Further sections deal with animal and plant cell culture engineering. The final section of the book deals with environmental topics and highlights the application of bioengineering principles in waste treatment and the recovery of valuable resources. With its cutting-edge visions, extensive discussions and unique perspectives, this is a ready reference for biotechnologists, bioengineers, bioengineers, biotechnological institutes, and environmental chemists.

Download or read book Sludge Reduction Technologies in Wastewater Treatment Plants written by Paola Foladori and published by IWA Publishing. This book was released on 2010-07-31 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sludge Reduction Technologies in Wastewater Treatment Plants is a review of the sludge reduction techniques integrated in wastewater treatment plants with detailed chapters on the most promising and most widespread techniques. The aim of the book is to update the international community on the current status of knowledge and techniques in the field of sludge reduction. It will provide a comprehensive understanding of the following issues in sludge reduction: principles of sludge reduction techniques; process configurations; potential performance; advantages and drawbacks; economics and energy consumption. This book will be essential reading for managers and technical staff of wastewater treatment plants as well as graduate students and post-graduate specialists.

Download or read book Index Medicus written by and published by . This book was released on 2004 with total page 1940 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1963- include as pt. 2 of the Jan. issue: Medical subject headings.

Download or read book Current Developments in Biotechnology and Bioengineering written by Christian Larroche and published by Elsevier. This book was released on 2016-09-17 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Developments in Biotechnology and Bioengineering: Bioprocesses, Bioreactors and Controls provides extensive coverage of new developments, state-of-the-art technologies, and potential future trends, reviewing industrial biotechnology and bioengineering practices that facilitate and enhance the transition of processes from lab to plant scale, which is becoming increasingly important as such transitions continue to grow in frequency. Focusing on industrial bioprocesses, bioreactors for bioprocesses, and controls for bioprocesses, this title reviews industrial practice to identify bottlenecks and propose solutions, highlighting that the optimal control of a bioprocess involves not only maximization of product yield, but also taking into account parameters such as quality assurance and environmental aspects. - Describes industrial bioprocesses based on the reaction media - Lists the type of bioreactors used for a specific bioprocess/application - Outlines the principles of control systems in various bioprocesses

Download or read book Biogas Processes for Sustainable Development written by Uri Marchaim and published by Food & Agriculture Org.. This book was released on 1992 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended to assist engineers, government officials and funding agencies to meet present and future challenges and make decisions on the promotion of anaerobic digestion as an alternative source of energy.

Download or read book Organic Matter and Rice written by and published by Int. Rice Res. Inst.. This book was released on 1984 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biogas Technology Transfer and Diffusion written by Mahmoud M. El-Halwagi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on the State of the Art on Biogas Technology, Transfer and Diffusion was held in Cairo, Egypt, from 17 to 24 November 1984. The Conference was organized by the Egyptian Academy of Scientific Research and Technology (ASR T), the Egyptian National Research Centre (NRC), the Bioenergy Systems and Technology project (BST) of the US Agency for International Development (US/AID) Office of Energy, and the National Academy of Sciences (NAS). A number of international organizations and agencies co-sponsored the Conference. More than 100 participants from 40 countries attended. The purpose of the Conference was to assess the viability of biogas technology (BGT) and propose future courses of action for exploiting BGT prospects to the fullest extent. The Conference emphasized a balanced coverage of technical, environ mental, social, economic and organizational aspects relevant to biogas systems design, operation and diffusion. It was organized to incorporate experiences that are pertinent, for the most part, to developing countries. In addition to the wide spectrum of presentations and country programs, structured and non-structured discussions among the participants were strongly encouraged in thematic sessions at round-table discussions, and through personal contacts during poster sessions and field trips. It was clear from the enthusiastic response of most participants that the Conference, in large measure, succeeded in fulfilling its mission. Although draft papers were distributed to all participants, it was felt that the results obtained were worthy of organized and refined documentation. And this is precisely what this book intends to do.

Download or read book The Microbiology of Anaerobic Digesters written by Michael H. Gerardi and published by John Wiley & Sons. This book was released on 2003-09-19 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anaerobic digestion is a biochemical degradation process that converts complex organic material, such as animal manure, into methane and other byproducts. Part of the author's Wastewater Microbiology series, Microbiology of Anareboic Digesters eschews technical jargon to deliver a practical, how-to guide for wastewater plant operators.

Download or read book Anaerobic Digestion Model No 1 ADM1 written by IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes and published by IWA Publishing. This book was released on 2002-02-01 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes was created with the aim to produce a generic model and common platform for dynamic simulations of a variety of anaerobic processes. This book presents the outcome of this undertaking and is the result of four years collaborative work by a number of international experts from various fields of anaerobic process technology. The purpose of this approach is to provide a unified basis for anaerobic digestion modelling. It is hoped this will promote increased application of modelling and simulation as a tool for research, design, operation and optimisation of anaerobic processes worldwide. This model was developed on the basis of the extensive but often disparate work in modelling and simulation of anaerobic digestion systems over the last twenty years. In developing ADM1, the Task Group have tried to establish common nomenclature, units and model structure, consistent with existing anaerobic modelling literature and the popular activated sludge models (See Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000, ISBN: 1900222248). As such, it is intended to promote widespread application of simulation from domestic (wastewater and sludge) treatment systems to specialised industrial applications. Outputs from the model include common process variables such gas flow and composition, pH, separate organic acids, and ammonium. The structure has been devised to encourage specific extensions or modifications where required, but still maintain a common platform. During development the model has been successfully tested on a range of systems from full-scale waste sludge digestion to laboratory-scale thermophilic high-rate UASB reactors. The model structure is presented in a readily applicable matrix format for implementation in many available differential equation solvers. It is expected that the model will be available as part of commercial wastewater simulation packages. ADM1 will be a valuable information source for practising engineers working in water treatment (both domestic and industrial) as well as academic researchers and students in Environmental Engineering and Science, Civil and Sanitary Engineering, Biotechnology, and Chemical and Process Engineering departments. Contents Introduction Nomenclature, State Variables and Expressions Biochemical Processes Physicochemical Processes Model Implementation in a Single Stage CSTR Suggested Biochemical Parameter Values, Sensitivity and Estimation Conclusions References Appendix A: Review of Parameters Appendix B: Supplementary Matrix Information Appendix C: Integration with the ASM Appendix D: Estimating Stoichiometric Coefficients for Fermentation Scientific & Technical Report No.13

Download or read book Mitigation of Greenhouse Gas Emissions in Livestock Production written by Pierre J. Gerber and published by Food & Agriculture Organization of the UN (FAO). This book was released on 2013 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current analysis was conducted to evaluate the potential of nutritional, manure and animal husbandry practices for mitigating methane (CH4) and nitrous oxide (N2O) - i.e. non-carbon dioxide (CO2) - GHG emissions from livestock production. These practices were categorized into enteric CH4, manure management and animal husbandry mitigation practices. Emphasis was placed on enteric CH4 mitigation practices for ruminant animals (only in vivo studies were considered) and manure mitigation practices for both ruminant and monogastric species. Over 900 references were reviewed; simulation and life cycle assessment analyses were generally excluded

Download or read book Innovative Wastewater Treatment Resource Recovery Technologies Impacts on Energy Economy and Environment written by Juan M. Lema and published by IWA Publishing. This book was released on 2017-06-15 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the 3R concept applied to wastewater treatment and resource recovery under a double perspective. Firstly, it deals with innovative technologies leading to: Reducing energy requirements, space and impacts; Reusing water and sludge of sufficient quality; and Recovering resources such as energy, nutrients, metals and chemicals, including biopolymers. Besides targeting effective C,N&P removal, other issues such as organic micropollutants, gases and odours emissions are considered. Most of the technologies analysed have been tested at pilot- or at full-scale. Tools and methods for their Economic, Environmental, Legal and Social impact assessment are described. The 3R concept is also applied to Innovative Processes design, considering different levels of innovation: Retrofitting, where novel units are included in more conventional processes; Re-Thinking, which implies a substantial flowsheet modification; and Re-Imagining, with completely new conceptions. Tools are presented for Modelling, Optimising and Selecting the most suitable plant layout for each particular scenario from a holistic technical, economic and environmental point of view.