Download or read book Kinetic Mechanisms for Premixed Laminar Steady State Methane Air Flames written by T. P. Coffee and published by . This book was released on 1983 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: A number of kinetic schemes have been used to model premixed, laminar, one-dimensional methane/air flames. Seven such kinetic schemes, including two new models, are compared with one another and with experimental data. The two new models, one with 14 species and one with 20 species, both agree with the experimental data over a range of stoichiometries from lean to rich. All of the models show good agreement for lean to slightly rich flames. This does not validate any of the models, even for this limited range. Rather, it is shown that the quantities measured are fairly insensitive to much of the mechanism. Therefore, models with incorrect kinetics can agree with the experimental data. In particular, the contribution of the C2 species to methane combustion is examined. While these species are important, we conclude that there is insufficient data to determine quantitatively the effects of the C2 chemistry reactions.
Download or read book Reduced Kinetic Mechanisms and Asymptotic Approximations for Methane air Flames written by Mitchell D. Smooke and published by Springer. This book was released on 1991 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this comprehensive text a systematic numerical and analytical treatment of the procedures for reducing complicated systems to a simplified reaction mechanism is presented. The results of applying the reduced reaction mechanism to a one-dimensional laminar flame are discussed. A set of premixed and non-premixed methane-air flames with simplified transport and skeletal chemistry are employed as test problems that are used later on to evaluate the results and assumptions in reduced reaction networks. The first four chapters form a short tutorial on the procedures used in formulating the test problems and in reducing reaction mechanisms by applying steady-state and partial-equilibrium approximations. The final six chapters discuss various aspects of the reduced chemistry problem for premixed and nonpremixed combustion.
Download or read book Reduced Kinetic Mechanisms and Asymptotic Approximations for Methane Air Flames written by Mitchell D. Smooke and published by Springer. This book was released on 2014-03-12 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this comprehensive text a systematic numerical and analytical treatment of the procedures for reducing complicated systems to a simplified reaction mechanism is presented. The results of applying the reduced reaction mechanism to a one-dimensional laminar flame are discussed. A set of premixed and non-premixed methane-air flames with simplified transport and skeletal chemistry are employed as test problems that are used later on to evaluate the results and assumptions in reduced reaction networks. The first four chapters form a short tutorial on the procedures used in formulating the test problems and in reducing reaction mechanisms by applying steady-state and partial-equilibrium approximations. The final six chapters discuss various aspects of the reduced chemistry problem for premixed and nonpremixed combustion.
Download or read book Reduced Kinetic Mechanisms for Applications in Combustion Systems written by Norbert Peters and published by Springer Science & Business Media. This book was released on 2008-09-11 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: In general, combustion is a spatially three-dimensional, highly complex physi co-chemical process oftransient nature. Models are therefore needed that sim to such a degree that it becomes amenable plify a given combustion problem to theoretical or numerical analysis but that are not so restrictive as to distort the underlying physics or chemistry. In particular, in view of worldwide efforts to conserve energy and to control pollutant formation, models of combustion chemistry are needed that are sufficiently accurate to allow confident predic tions of flame structures. Reduced kinetic mechanisms, which are the topic of the present book, represent such combustion-chemistry models. Historically combustion chemistry was first described as a global one-step reaction in which fuel and oxidizer react to form a single product. Even when detailed mechanisms ofelementary reactions became available, empirical one step kinetic approximations were needed in order to make problems amenable to theoretical analysis. This situation began to change inthe early 1970s when computing facilities became more powerful and more widely available, thereby facilitating numerical analysis of relatively simple combustion problems, typi cally steady one-dimensional flames, with moderately detailed mechanisms of elementary reactions. However, even on the fastest and most powerful com puters available today, numerical simulations of, say, laminar, steady, three dimensional reacting flows with reasonably detailed and hence realistic ki netic mechanisms of elementary reactions are not possible.
Download or read book Kinetic Mechanisms for Premixed Laminar Steady State Hydrogen Nitrous Oxide Flames written by and published by . This book was released on 1986 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report pertains to the detailed kinetics governing premixed, laminar, one-dimensional hydrogen/nitrous oxide flames. The long range goal is to understand the kinetics governing propellant decomposition, where nitrogen chemistry is important. Hydrogen/nitrous oxide flames are the simplest case of a flame controlled by nitrogen chemistry. A model has been developed for premixed, laminar, one-dimensional hydrogen/nitrous oxide flames. Results have been compared with a range of experimental data. The present model roughly reproduces the data, but inaccuracies still exist. Sensitivity and screening analyses have been used to indicate the additional experimental data needed to improve the model. Keywords: Burning Velocity.
Download or read book Sensitivity Analysis of Laminar Premixed CH 4 air Flames Using Full and Reduced Kinetic Mechanisms written by Bernd Rogg and published by . This book was released on 1990 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion Technology for a Clean Environment written by Maria Carvalho and published by CRC Press. This book was released on 2002-11-08 with total page 1576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The more than 90 refereed papers in this volume continue a series of biannual benchmarks for technologies that maximize energy conversion while minimizing undesirable emissions. Covering the entire range of industrial and transport combustion as well as strategies for energy research and development, these state-of-the-art will be indispensable to mechanical and chemical engineers in academia and industry and technical personnel in military, energy and environmental government agencies. The topics covered in this book include wood, oil, gas and coal combustion, combustion of alternative fuels, co-combustion and co-gasification, catalytic combustion, NO, SO, soot fundamentals, advanced diagnostics, burners, fluidized bed combustion, incineration, engines, advanced cycles, gas clean-up, control strategy and clean combustion in process industries.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Flow Simulation III written by Ernst Heinrich Hirschel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains eighteen reports on work, which is conducted since 2000 in the Collaborative Research Programme 'Numerical Flow Simulation' of the Centre National de la Recherche Scientifique (CNRS) and the Deutsche Forschungsgemeinschaft (DFG). French and German engineers and mathematicians present their joint research on the topics 'Development of Solution Techniques', 'Crystal Growth and Melts', 'Flows of Reacting Gases, Sound Generation' and 'Turbulent Flows'. In the background of their work is the still strong growth of the performance of super-computer architectures, which, together with large advances in algorithms, is opening vast new application areas of numerical flow simulation in research and industrial work. Results of this programme from the period 1996 to 1998 have been presented in NNFM 66 (1998), and NNFM75 (2001).
Download or read book Analysis of Kinetic Reaction Mechanisms written by Tamás Turányi and published by Springer. This book was released on 2014-12-29 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical processes in many fields of science and technology, including combustion, atmospheric chemistry, environmental modelling, process engineering, and systems biology, can be described by detailed reaction mechanisms consisting of numerous reaction steps. This book describes methods for the analysis of reaction mechanisms that are applicable in all these fields. Topics addressed include: how sensitivity and uncertainty analyses allow the calculation of the overall uncertainty of simulation results and the identification of the most important input parameters, the ways in which mechanisms can be reduced without losing important kinetic and dynamic detail, and the application of reduced models for more accurate engineering optimizations. This monograph is invaluable for researchers and engineers dealing with detailed reaction mechanisms, but is also useful for graduate students of related courses in chemistry, mechanical engineering, energy and environmental science and biology.
Download or read book Chemical Kinetics in Combustion and Reactive Flows Modeling Tools and Applications written by V. I. Naoumov and published by Cambridge University Press. This book was released on 2019-08-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces advanced mathematical tools for the modeling, simulation, and analysis of chemical non-equilibrium phenomena in combustion and flows, following a detailed explanation of the basics of thermodynamics and chemical kinetics of reactive mixtures. Researchers, practitioners, lecturers, and graduate students will find this work valuable.
Download or read book Fossil Energy Update written by and published by . This book was released on 1977 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Direct Numerical Simulation for Turbulent Reacting Flows written by Thierry Baritaud and published by Editions TECHNIP. This book was released on 1996 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: Description of accurate boundary conditions for the simulation of reactive flows. Parallel direct numerical simulation of turbulent reactive flow. Flame-wall interaction and heat flux modelling in turbulent channel flow. A numerical study of laminar flame wall interaction with detailed chemistry: wall temperature effects. Modeling and simulation of turbulent flame kernel evolution. Experimental and theoretical analysis of flame surface density modelling for premixed turbulent combustion. Gradient and counter-gradient transport in turbulent premixed flames. Direct numerical simulation of turbulent flames with complex chemical kinetics. Effects of curvature and unsteadiness in diffusion flames. Implications for turbulent diffusion combustion. Numerical simulations of autoignition in turbulent mixing flows. Stabilization processes of diffusion flames. References.
Download or read book Mathematical Modelling of Gas Phase Complex Reaction Systems Pyrolysis and Combustion written by and published by Elsevier. This book was released on 2019-06-06 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling of Gas-Phase Complex Reaction Systems: Pyrolysis and Combustion, Volume 45, gives an overview of the different steps involved in the development and application of detailed kinetic mechanisms, mainly relating to pyrolysis and combustion processes. The book is divided into two parts that cover the chemistry and kinetic models and then the numerical and statistical methods. It offers a comprehensive coverage of the theory and tools needed, along with the steps necessary for practical and industrial applications. Details thermochemical properties and "ab initio" calculations of elementary reaction rates Details kinetic mechanisms of pyrolysis and combustion processes Explains experimental data for improving reaction models and for kinetic mechanisms assessment Describes surrogate fuels and molecular reconstruction of hydrocarbon liquid mixtures Describes pollutant formation in combustion systems Solves and validates the kinetic mechanisms using numerical and statistical methods Outlines optimal design of industrial burners and optimization and dynamic control of pyrolysis furnaces Outlines large eddy simulation of turbulent reacting flows
Download or read book An Experimental and Computational Study on the Propagation and Kinetic Structure of Laminar Premixed Flames written by Fokion Egolfopoulos and published by . This book was released on 1990 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Combustion written by Norbert Peters and published by Cambridge University Press. This book was released on 2000-08-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.
Download or read book Numerical Flow Simulation II written by Ernst H. Hirschel and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this series is to publish promptly and in a de- tailed form new material from the field of Numerical Fluid Mechanics including the use of advanced computer systems. Published are reports on specialized conferences, workshops, research programs, and monographs. Contents: This volume contains nineteen reports on work, which is conducted since 1998 in the Collaborative Research Programme "Numerical Flow Simulation" of the Centre National de la Recherche Scientifique (CNRS) and the Deutsche Forschungsgemeinschaft (DFG). French and German engineers and mathematicians present their joint research on the topics "Development of Solution Techniques", "Crystal Growth and Melts", "Flows of Reacting Gases", and "Turbulent Flows". In the background of their work is the still strong growth of the performance of super-computer architectures, which, together with large advances in algorithms, is opening vast new application areas of numerical flow simulation in research and industrial work. Results of this programme from the period 1996 to 1998 have been presented in NNFM 66 (1998)
