Download or read book Kaizen Planning Implementing and Controlling written by Jorge Luis García-Alcaraz and published by Springer. This book was released on 2016-10-27 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports a literature review on kaizen, its industrial applications, critical success factors, benefits gained, journals that publish about it, main authors (research groups) and universities. Kaizen is treated in this book in three stages: planning, implementation and control. The authors provide a questionnaire designed with activities in every stage, highlighting the benefits gained in each stage. The study has been applied to more than 400 managers and leaders in continuous improvement in Mexican maquiladoras. A univariate analysis is provided to the activities in every stage. Moreover, structural equation models associating those activities with the benefits gained are presented for a statistical validation. Such a relationship between activities and benefits helps managers to identify the most important factor affecting their benefits and financial income.
Download or read book Lean Supply Chain Management in Fashion and Textile Industry written by Rajkishore Nayak and published by Springer Nature. This book was released on 2022-08-29 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the concepts of lean manufacturing that help to achieve the objectives of sustainability in a global competitive atmosphere. Lean can help to lower the manufacturing cost in the rising labour and material cost market. Lean is based on various fundamental concepts such as Kaizen, Kanban, Zidoka, 5S and Six Sigma, which aim at reducing process waste for efficiency and productivity that are discussed in this book. In addition, the technological changes such as introduction of Internet technologies and Industry 4.0 are taken care by the lean concepts, which are also addressed in this book.
Download or read book Kaizen Assembly written by Chris A. Ortiz and published by CRC Press. This book was released on 2006-06-26 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is easy to learn the philosophy and the concepts of kaizen. It is quite another challenge to translate the philosophy into action. While most books expound on the underlying principles and theory, Kaizen Assembly: Designing, Constructing, and Managing a Lean Assembly Line takes you step-by-step through an actual kaizen event. This approach demon
Download or read book Agile Kaizen written by Ángel Medinilla and published by Springer. This book was released on 2014-08-04 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agile teams have been struggling with the concept of continuous improvement since the first Agile frameworks were developed, and still very little has been written about the practice of continuous improvement in Agile environments. Although team retrospectives have been prescribed and some practices have been introduced in order to implement and facilitate them, the truth is that most Agile teams are conducting dull retrospectives that end with a list of things that have been done wrong, just to repeat the same list two weeks later at the next meeting. Instead of listing hundreds of Japanese-labeled tools, this book gives you practical insights into how to spot improvement opportunities, how to plan for improvement and how to engage everyone in your company in the Kaizen process. In addition, it will also provide you with 27 proven practices and 12 bonus activities to introduce into your retrospectives in order to keep them fresh, creative and exciting, so you can promise a team that, in a year’s time, no two retrospectives will be alike. This book helps you as a manager, team leader, change agent or consultant in any type of organization to unleash the real power of Kaizen cultures – no matter what kind of organization, market, product, technology, vision, goal or size. It provides you with the background, tools and practical hints on how to engage your organization in a process of continuous quest for new and better ways of performing.
Download or read book Advances in Industrial and Production Engineering written by Kripa Shanker and published by Springer. This book was released on 2019-04-23 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book discusses different topics of industrial and production engineering such as sustainable manufacturing systems, computer-aided engineering, rapid prototyping, manufacturing management and automation, metrology, manufacturing process optimization, casting, welding, machining, and machine tools. The contents of this book will be useful for researchers as well as professionals.
Download or read book Advances in Manufacturing Production Management and Process Control written by Stefan Trzcielinski and published by Springer Nature. This book was released on 2021-07-03 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a timely snapshot of human factors research and methods fostering a better integration of technologies and humans during the whole manufacturing cycle, giving a special emphasis to the quality and safety of the industrial environment for workers, the efficiency of the manufacturing processes itself, the quality of the final product, and its distribution to and use by the customers. It discusses timely issues relating to the automation of the manufacturing processes, and the challenges imposed by the implementation of industry 4.0, additive manufacturing and 3D printing technologies. Contributions cover a range of industrial sectors, such as the automotive, health and constructions ones, highlighting both organizational and engineering solutions fostering sustainability, globalization, customization, workers’ well-being and consumers’ satisfaction, among other issues. Based on the AHFE 2021 Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, held virtually on 25–29 July, 2021, from USA, this book, which merges ergonomic research and technical know-how in the field of manufacturing and product design, addresses a wide range of engineers, designers and professionals, dealing with the integration of technologies and humans in the factories of the future.
Download or read book Kaizen and Kaizen Event Implementation written by Chris A. Ortiz and published by Pearson Education. This book was released on 2009-04-08 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Practical, How-to Guide to Succeeding with Kaizen Programs and Events Today manufacturers need kaizen’s continuous productivity improvement and waste reduction techniques more than ever. Kaizen and Kaizen Event Implementation provides specific, detailed solutions that have proven successful in real manufacturing environments. Ortiz, author of the best-selling Lessons from a Lean Consultant, covers every element of a successful kaizen program and offers techniques for implementing several key kaizen events. Drawing on his unsurpassed, in-the-trenches experience, he shares powerful insights into changing cultures, gaining management buy-in, training, reporting, follow-up, and much more. Whether you’re a plant manager, director, engineer, or quality specialist, this book will help you make kaizen work. Avoid common implementation mistakes Find the right champion and establish an effective steering committee Create timelines, select teams and leaders, and define objectives Use kaizen events to implement 5S, standard work, Kanban, and new line designs Includes a chapter-length case study from a real manufacturing firm
Download or read book True Kaizen written by Collin McLoughlin and published by Taylor & Francis. This book was released on 2017-11-13 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: What does it take to manage an organization to success? No matter what industry you are in, an organization is primarily a group of people. This book focuses on that ever-important human element. In the rush to get 'lean', many organizations focus solely on tools for increasing productivity, but where do these tools come from? In this book, Collin McLoughlin and Toshihiko Miura look back on their decades of international consulting experience to examine how organizations around the world have transformed on a cultural level by respecting the people who work within them and leveraging their creativity to solve problems. As our workforce becomes more knowledgeable, skillful, and more perceptive of their needs and wants as employees, the ability to reach the true potential of an organization becomes more and more difficult. Managers must look at each individual element of an equation like this in order to fully understand how to achieve an answer. They must begin to answer more focused questions, such as: 1. How productive is the existing work climate and culture? 2. How do employees, as individuals, navigate the existing work climate? (How do they deal with day-today issues with each other?) 3. Where and how are individuals and their work processes assessed? 4. What obstacles do employees face every day, and are they empowered to fix these obstacles? 5. What role does leadership play at each level of the organization? (Looking at the organization in layers of management.) To address these challenges, this book focuses on three main aspects of leadership and management: 1. Addressing and Improving the Perspective of Management -- The ideas presented in this book are not limited to a certain industry or field of work, but can be applied in any setting because they speak to a universal human element. 2. Exploring and Improving Work Climate -- Organizations are social entities, operating within their own controlled environment. This book will explore the factors that contribute to, and encourage, a positive work climate. 3. Observing and Eliminating Wasteful Work Processes -- Observing wasteful activities and work processes requires a refined perspective. The case studies presented illustrate the How and Why to help refine expertise. This will also lead to the joy and benefits
Download or read book Introducing Foreign Models for Development written by Izumi Ohno and published by Springer Nature. This book was released on 2023-10-03 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book studies how foreign models of economic development can be effectively learned by and applied to today’s latecomer countries. Policy capacity and societal learning are increasingly stressed as pre-conditions for successful catch-up. However, how such learning should be initiated by individual societies with different features needs to be explained. The book answers this pragmatic question from the perspective of Japan’s past experience and its extensive development cooperation in Asia, Africa, and Latin America. Since the late nineteenth century, Japan has developed a unique philosophy and method for adopting advanced technologies and systems from the West; the same philosophy and method govern its current cooperation with the developing world. The key concepts are local learning and translative adaptation. Local learning says that development requires the learner to adopt a proactive mindset and the goal of graduating from receiving aid. Meanwhile, translative adaptation requires foreign models be modified to fit local realities given the different structures of the home and foreign society. The development process must be wholly owned by the domestic society in rejection of copy-and-paste acceptance. These ideas not only informed Japan but are key to successful development for all. The book also asks how this learning method should—or should not—be revised in the age of SDGs and digitalization. Following the overview section that lays out the general principles, the book offers many real cases from Japan and other countries. The concrete actions outlined in these cases, with close attention to individual growth “ingredients” as opposed to general theories, are crucial to successful policy making. The book contains materials that are highly useful for national leaders and practitioners within developing countries as well as students of development studies.
Download or read book The Kaizen Event Planner written by Karen Martin and published by CRC Press. This book was released on 2017-07-27 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kaizen Events are an effective way to train organizations to break unproductive habits and adopt a continuous improvement philosophy while, at the same time, achieve breakthrough performance-level results. Through Kaizen Events, cross-functional teams learn how to make improvements in a methodological way. They learn how to quickly study a process,
Download or read book Beyond Strategic Kaizen written by Alin Posteucă and published by CRC Press. This book was released on 2023-02-16 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently, the challenge for manufacturing organizations is how to achieve their expected profit by continuously improving productivity or reducing costs. Manufacturing organizations have been using different improvement approaches to achieving cost reduction and productivity improvement for years by eliminating various losses and waste structures, such as excess inventory, excessive workforce, excessive capacity, excessive utility consumption, and so on. But is the problem solved? Unfortunately, no! Often manufacturing companies focus on maximizing the flow and meeting customer needs but forget their real aim – to make a profit for their stakeholders. Too many organizations meet customer expectations by seeking to continuously synchronize the flow to market demand but forget to check that they are doing it profitably enough to ensure business continuity and prosperity. When the financial results show that they are not so profitable, it is already too late. Moreover, the strategic direction of systematic improvements according to the sales trend – depending on the current degree of production capacity utilization and its dynamic effects on cost structures – is deficient in many manufacturing companies. So, would the failure of strategic and profitable systematic improvements be an option? Of course not! If the ultimate goal of the organization is to create target profit for stakeholders, then the behavior and strategic systematic improvements must be directed to those scenarios, strategies, tasks, problems, and “production levers” that are best based on creating the target profit. That’s what Strategic Kaizen thinking does – the simultaneous and consistent achievement of systematic operational and financial improvements in a strategic and operational manner. It achieves both synchronous operations at market demand by fulfilling takt time and profitable operations in accordance with profit demand by fulfilling takt profit. In short, the Strategic Kaizen mission is striving for the fulfillment of the ideal state of operations called synchronous profitable operations. In this book, the author, while presenting in detail the seven processes of Strategic Kaizen methodology, exposes the answer to historically incomplete thinking of productivity improvements for target profitability. The uniqueness of the book is reinforced by the detailed presentation of the successful application of the Strategic Kaizen thinking over the years in two multinational manufacturing organizations operating in highly competitive markets, addressing the synchronous profitable operations for both the sales increase scenario and the sales decrease scenario. Moreover, it presents examples of the practical application of the “white-collar” Strategic Kaizen. Essentially, by adopting the Strategic Kaizen methodology presented in detail in this book to consistently achieve the ideal state of a manufacturing organization, organizations will enter a new paradigm of thinking of strategic improvements – Strategic Kaizen thinking – to meet annual and multiannual target profits in a unique and effective way that operates according to its own strategic and operational management system.
Download or read book UGC NET Management 17 Practice Question Bank Include 4000 Question Answer With Solution MCQ As Per Updated Syllabus written by DIWAKAR EDUCATION HUB and published by DIWAKAR EDUCATION HUB. This book was released on 2021-09-07 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: MCQs Highlights - 1. Complete Units Cover Include All 10 Units Question Answer 2. 400 Practice Question Answer Each Unit 3. Total 4000 + Practice Question Answer 4. Try to take all topics MCQ 5. Include Oriented & Most Expected Question Answer 6. As Per the New Updated Syllabus 7. All Question With Answer & Explanations For More Details Call 7310762592
Download or read book Managing Service Operations written by Bill Hollins and published by SAGE. This book was released on 2006-09-18 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: `Bill Hollins continues his practical investigation of design in the service sector. In this new book with Sadie Shinkins, he provides a down to earth approach to an important topic in the field′ - Naomi Gornick, Honorary Professor, University of Dundee Guiding readers through each stage in the design and implementation of service operations, this book combines lively examples that are easy to relate to with clearly explained theory. Throughout, chapters contain pedagogical features that will help students to get the most from the ideas and examples being presented in the book. They include: - Chapter objectives; - Short cases; - Student exercises; - Chapter summaries; - Further reading section; - A glossary of key terms.
Download or read book Modular Kaizen written by Grace L. Duffy and published by Quality Press. This book was released on 2013-11-07 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modular Kaizen is a development of necessity. Improvement has to happen on the fly in our rapidly changing world. This book is about using the resources, people, and schedules already in place to get things done. Modular Kaizen is the counterpoint to a kaizen blitz, in which team members are confined in a room to hammer out an opportunity or a solution to some problem. In the hectic, interrupt-driven environment of many organizations, it is simply not possible to remove critical players from normal operations for any length of time. Grace Duffy draws on 40 years of experience to incorporate techniques, innovations, and lessons learned in pursuit of effective continuous and breakthrough improvement. Part I provides the conceptual model along with steps and tools for process and system improvement in an extremely busy and interrupt-driven workplace. Part II offers three case studiesfrom manufacturing, healthcare, and aerospaceto show how the techniques work in real time. If you are looking for proven approaches to integrating quality improvement into daily work, this is your book. It is written for those of us who have to get it done, not just talk about it. So roll up your sleeves and dig in.
Download or read book Workers Managers Productivity written by Akio Hosono and published by Springer Nature. This book was released on 2020-02-14 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides a glimpse into the Japanese management technique known as “Kaizen,” and the ways it has been disseminated around the developing world. The novelty of this book is three-fold: it provides a contextualized view of the mechanisms of initiatives implementing Kaizen in developing countries; compared with productivity studies, it places the relationship between workers and managers at the center of inquiry, reflecting the intent of SDG8 concerning decent work and economic growth; and it provides an overview of the heterogeneity of Kaizen in terms of geography and firm size. This book explores how improving management techniques can support firms’ productivity and quality. Given its wide range of case studies from across Africa, Asia and Latin America, this book will be of value to scholars, policymakers and advocates of sustainable development alike.
Download or read book Applying the Kaizen in Africa written by Keijiro Otsuka and published by Springer. This book was released on 2018-08-22 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: At present, how to develop industries is a burning issue in Africa, where population growth remains high and economic development has thus far failed to provide sufficient jobs for many, especially young people and women. The creation of productive jobs through industrial development ought to be a central issue in steering economic activity across the continent. The authors of this book, consisting of two development economists and five practitioners, argue that the adoption of Kaizen management practices, which originated in Japan and have become widely used by manufacturers in advanced and emerging economies, is decisively the most effective first step for industrial development in Africa. This open access book discusses what Kaizen management is, why it is applicable to Africa, and why it can provide Africa with a springboard for sustainable economic growth and employment generation.
Download or read book Quality Management for Organizations Using Lean Six Sigma Techniques written by Erick Jones and published by CRC Press. This book was released on 2014-02-25 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: The next step in the evolution of the organizational quality field, Lean Six Sigma (LSS) has come of age. However, many challenges to using LSS in lieu of, in conjunction with, or integrated with other quality initiatives remain. An update on the current focus of quality management, Quality Management for Organizations Using Lean Six Sigma Techniques covers the concepts and principles of Lean Six Sigma and its origins in quality, total quality management (TQM), and statistical process control (SPC), and then explores how it can be integrated into manufacturing, logistics, and healthcare operations. The book presents the background on quality and Lean Six Sigma (LSS) techniques and tools, previous history of LSS in manufacturing, and current applications of LSS in operations such as logistics and healthcare. It provides a decision model for choosing whether to use LSS or other quality initiatives, which projects should be selected and prioritized, and what to do with non-LSS projects. The author also details an integration model for integrating and developing integrated LSS and other quality initiatives, and common mathematical techniques that you can use for performing LSS statistical calculations. He describes methods to attain the different Six Sigma certifications, and closes with discussion of future directions of Lean Six Sigma and quality. Case studies illustrate the integration of LSS principles into other quality initiatives, highlighting best practices as well as successful and failed integrations. This guide gives you a balanced description of the good, bad, and ugly in integrating LSS into modern operations, giving you the understanding necessary to immediately apply the concepts to your quality processes.
