Download or read book Impingement Jet Cooling in Gas Turbines written by R.S. Amano and published by WIT Press. This book was released on 2014-05-28 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the requirement for enhanced cooling technologies on modern gas turbine engines, advanced research and development has had to take place in field of thermal engineering. Among the gas turbine cooling technologies, impingement jet cooling is one of the most effective in terms of cooling effectiveness, manufacturability and cost. The chapters contained in this book describe research on state-of-the-art and advanced cooling technologies that have been developed, or that are being researched, with a variety of approaches from theoretical, experimental, and CFD studies. The authors of the chapters have been selected from some of the most active researchers and scientists on the subject. This is the first to book published on the topics of gas turbines and heat transfer to focus on impingement cooling alone.
Download or read book Three Dimensional Attached Viscous Flow written by Ernst Heinrich Hirschel and published by Springer Science & Business Media. This book was released on 2013-10-29 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viscous flow is treated usually in the frame of boundary-layer theory and as two-dimensional flow. Books on boundary layers give at most the describing equations for three-dimensional boundary layers, and solutions often only for some special cases. This book provides basic principles and theoretical foundations regarding three-dimensional attached viscous flow. Emphasis is put on general three-dimensional attached viscous flows and not on three-dimensional boundary layers. This wider scope is necessary in view of the theoretical and practical problems to be mastered in practice. The topics are weak, strong, and global interaction, the locality principle, properties of three-dimensional viscous flow, thermal surface effects, characteristic properties, wall compatibility conditions, connections between inviscid and viscous flow, flow topology, quasi-one- and two-dimensional flows, laminar-turbulent transition and turbulence. Though the primary flight speed range is that of civil air transport vehicles, flows past other flying vehicles up to hypersonic speeds are also considered. Emphasis is put on general three-dimensional attached viscous flows and not on three-dimensional boundary layers, as this wider scope is necessary in view of the theoretical and practical problems that have to be overcome in practice. The specific topics covered include weak, strong, and global interaction; the locality principle; properties of three-dimensional viscous flows; thermal surface effects; characteristic properties; wall compatibility conditions; connections between inviscid and viscous flows; flow topology; quasi-one- and two-dimensional flows; laminar-turbulent transition; and turbulence. Detailed discussions of examples illustrate these topics and the relevant phenomena encountered in three-dimensional viscous flows. The full governing equations, reference-temperature relations for qualitative considerations and estimations of flow properties, and coordinates for fuselages and wings are also provided. Sample problems with solutions allow readers to test their understanding.
Download or read book Thermal Engineering in Power Systems written by Ryoichi Amano and published by WIT Press. This book was released on 2008 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and development in thermal engineering for power systems are of significant importance to many scientists who are engaged in research and design work in power-related industries and laboratories. This book focuses on variety of research areas including Components of Compressor and Turbines that are used for both electric power systems and aero engines, Fuel Cells, Energy Conversion, and Energy Reuse and Recycling Systems. To be competitive in today's market, power systems need to reduce the operating costs, increase capacity factors and deal with many other tough issues. Heat Transfer and fluid flow issues are of great significance and it is likely that a state-of-the-art edited book with reference to power systems will make a contribution for design and R&D engineers and the development towards sustainable energy systems.
Download or read book Large Eddy Simulation for Compressible Flows written by Eric Garnier and published by Springer Science & Business Media. This book was released on 2009-08-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses both the fundamentals and the practical industrial applications of Large Eddy Simulation (LES) in order to bridge the gap between LES research and the growing need to use it in engineering modeling.
Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 1998-05-18 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer
Download or read book Gas Turbine Heat Transfer and Cooling Technology Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.
Download or read book Proceedings of International Conference on Thermofluids written by Shripad Revankar and published by Springer Nature. This book was released on 2020-11-21 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected and peer-reviewed proceedings of the International Conference on Thermofluids (KIIT Thermo 2020). It focuses on the latest studies and findings in the areas of fluid dynamics, heat transfer, thermodynamics, and combustion. Some of the topics covered in the book include electronic cooling, HVAC system analysis, inverse heat transfer, combustion, nano-fluids, multiphase flow, high-speed flow, and shock waves. The book includes both experimental and numerical studies along with a few review chapters from experienced researchers, and is expected to lead to new research in this important area. This book is of interest to students, researchers as well as practitioners working in the areas of fluid dynamics, thermodynamics, and combustion.
Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 1995-05-25 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer is designed to fill the information gap between regularly scheduled journals and university level textbooks by providing in-depth review articles over a broader scope than is allowablein either journals or texts.
Download or read book Handbook of Thermal Science and Engineering written by and published by Springer. This book was released on 2018-07-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook provides researchers, faculty, design engineers in industrial R&D, and practicing engineers in the field concise treatments of advanced and more-recently established topics in thermal science and engineering, with an important emphasis on micro- and nanosystems, not covered in earlier references on applied thermal science, heat transfer or relevant aspects of mechanical/chemical engineering. Major sections address new developments in heat transfer, transport phenomena, single- and multiphase flows with energy transfer, thermal-bioengineering, thermal radiation, combined mode heat transfer, coupled heat and mass transfer, and energy systems. Energy transport at the macro-scale and micro/nano-scales is also included. The internationally recognized team of authors adopt a consistent and systematic approach and writing style, including ample cross reference among topics, offering readers a user-friendly knowledgebase greater than the sum of its parts, perfect for frequent consultation. The Handbook of Thermal Science and Engineering is ideal for academic and professional readers in the traditional and emerging areas of mechanical engineering, chemical engineering, aerospace engineering, bioengineering, electronics fabrication, energy, and manufacturing concerned with the influence thermal phenomena.
Download or read book Fundamental Principles of Heat Transfer written by Stephen Whitaker and published by Elsevier. This book was released on 2013-10-22 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Principles of Heat Transfer introduces the fundamental concepts of heat transfer: conduction, convection, and radiation. It presents theoretical developments and example and design problems and illustrates the practical applications of fundamental principles. The chapters in this book cover various topics such as one-dimensional and transient heat conduction, energy and turbulent transport, forced convection, thermal radiation, and radiant energy exchange. There are example problems and solutions at the end of every chapter dealing with design problems. This book is a valuable introductory course in heat transfer for engineering students.
Download or read book NBS Special Publication written by and published by . This book was released on 1980 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tackling Turbulent Flows in Engineering written by Anupam Dewan and published by Springer Science & Business Media. This book was released on 2010-10-23 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emphasis of this book is on engineering aspects of fluid turbulence. The book explains for example how to tackle turbulence in industrial applications. It is useful to several disciplines, such as, mechanical, civil, chemical, aerospace engineers and also to professors, researchers, beginners, under graduates and post graduates. The following issues are emphasized in the book: - Modeling and computations of engineering flows: The author discusses in detail the quantities of interest for engineering turbulent flows and how to select an appropriate turbulence model; Also, a treatment of the selection of appropriate boundary conditions for the CFD simulations is given. - Modeling of turbulent convective heat transfer: This is encountered in several practical situations. It basically needs discussion on issues of treatment of walls and turbulent heat fluxes. - Modeling of buoyancy driven flows, for example, smoke issuing from chimney, pollutant discharge into water bodies, etc
Download or read book Analytical Heat Transfer written by Je-Chin Han and published by CRC Press. This book was released on 2022-06-24 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Heat Transfer explains how to analyze and solve conduction, convection, and radiation heat transfer problems. It enables students to tackle complex engineering heat transfer problems prevalent in practice. Covering heat transfer in high-speed flows and unsteady highly turbulent flows, the book also discusses enhanced heat transfer in channels, heat transfer in rotating channels, numerical modeling for turbulent flow heat transfer, and thermally developing heat transfer in a circular tube. The second edition features new content on Duhamel’s superposition method, Green’s function method for transient heat conduction, finite-difference method for steady state and transient heat conduction in cylindrical coordinates, and laminar mixed convection. It includes two new chapters on laminar-to-turbulent transitional heat transfer and turbulent flow heat transfer enhancement, in addition to end-of-chapter problems. The book bridges the gap between basic heat transfer undergraduate courses and advanced heat transfer graduate courses for a single semester of intermediate heat transfer, advanced conduction/radiation heat transfer, or convection heat transfer. Features: Focuses on analyzing and solving classic heat transfer problems in conduction, convection, and radiation Covers 2-D and 3-D view factor evaluation, combined radiation with conduction and/or convection, and gas radiation optically thin and optically thick limits Features updated content and new chapters on mass and heat transfer analogy, thermally developing heat transfer in a circular tube, laminar-turbulent transitional heat transfer, unsteady highly turbulent flows, enhanced heat transfer in channels, heat transfer in rotating channels, and numerical modeling for turbulent flow heat transfer Provides step-by-step mathematical formula derivations, analytical solution procedures, and demonstration examples Includes end-of-chapter problems with an accompanying Solutions Manual for instructors This book is ideal for undergraduate and graduate students studying basic heat transfer and advanced heat transfer.
Download or read book Gas Turbine Blade Cooling written by Chaitanya D Ghodke and published by SAE International. This book was released on 2018-12-10 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbines play an extremely important role in fulfilling a variety of power needs and are mainly used for power generation and propulsion applications. The performance and efficiency of gas turbine engines are to a large extent dependent on turbine rotor inlet temperatures: typically, the hotter the better. In gas turbines, the combustion temperature and the fuel efficiency are limited by the heat transfer properties of the turbine blades. However, in pushing the limits of hot gas temperatures while preventing the melting of blade components in high-pressure turbines, the use of effective cooling technologies is critical. Increasing the turbine inlet temperature also increases heat transferred to the turbine blade, and it is possible that the operating temperature could reach far above permissible metal temperature. In such cases, insufficient cooling of turbine blades results in excessive thermal stress on the blades causing premature blade failure. This may bring hazards to the engine's safe operation. Gas Turbine Blade Cooling, edited by Dr. Chaitanya D. Ghodke, offers 10 handpicked SAE International's technical papers, which identify key aspects of turbine blade cooling and help readers understand how this process can improve the performance of turbine hardware.
Download or read book Recent Advances in Mechanical Infrastructure written by Ajit Kumar Parwani and published by Springer Nature. This book was released on 2022-01-03 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents latest research-based innovations in the field of mechanical infrastructure presented in the International Conference on Recent Advances in Mechanical Infrastructure (ICRAM 2021). The broad research topics presented in this book are recent advances in thermal infrastructure: This includes aerodynamics, renewable energy, computational fluid dynamics, carbon dioxide capture and sequestration, energy and thermo-fluids, fluid dynamics, fuels and combustion, heat and mass transfer, internal combustion engine, and refrigeration and air conditioning. Recent advances in manufacturing infrastructure includes green manufacturing, instrumentation and control, material characterization, manufacturing techniques, rapid prototyping, polymers, and composites. Recent advances in infrastructure planning and design includes applied mechanics, bio-mechanics, computer-aided engineering design, finite element analysis, industrial tribology, machine design, robotics and automation, dynamics and vibration, industrial engineering, and optimization.
Download or read book Heat Transfer Enhancement in Chemical Processes written by Lili Sun and published by Elsevier. This book was released on 2024-08-14 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer Enhancement in Chemical Processes combines process technologies with heat exchange equipment to study heat transfer enhancement. The book provides guidance for the progress of process technologies and the application of enhanced heat transfer equipment. It analyzes the basic principles of heat transfer and summarizes the theories and methods of heat transfer enhancement, while also focusing on three representative processes in petrochemical industry, including oil refining, aromatics, and ethylene production. The book summarizes in a systematical way the practical application of heat transfer enhancement in the petrochemical industry, from the equipment components, the processes, and the whole plant. - Puts theory into practice, providing guidance for the application of scientific research achievements - Integrates process technologies with process intensification, providing guidance for process flow enhancement - Combines process with equipment, introducing heat transfer enhancement technologies suitable for different processes - Covers the oil refining unit, aromatics unit, the ethylene plant and its downstream units
Download or read book Journal of Thermophysics and Heat Transfer written by and published by . This book was released on 2006 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: This journal is devoted to the advancement of the science and technology of thermophysics and heat transfer through the dissemination of original research papers disclosing new technical knowledge and exploratory developments and applications based on new knowledge. It publishes papers that deal with the properties and mechanisms involved in thermal energy transfer and storage in gases, liquids, and solids or combinations thereof. These studies include conductive, convective, and radiative modes alone or in combination and the effects of the environment.
