Download or read book IX International Conference on Fault Tolerant Systems and Diagnostics written by and published by . This book was released on 1986 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 9th IFToMM International Conference on Rotor Dynamics written by Paolo Pennacchi and published by Springer. This book was released on 2015-05-26 with total page 2214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 9th IFToMM International Conference on Rotor Dynamics. This conference is a premier global event that brings together specialists from the university and industry sectors worldwide in order to promote the exchange of knowledge, ideas, and information on the latest developments and applied technologies in the dynamics of rotating machinery. The coverage is wide ranging, including, for example, new ideas and trends in various aspects of bearing technologies, issues in the analysis of blade dynamic behavior, condition monitoring of different rotating machines, vibration control, electromechanical and fluid-structure interactions in rotating machinery, rotor dynamics of micro, nano and cryogenic machines, and applications of rotor dynamics in transportation engineering. Since its inception 32 years ago, the IFToMM International Conference on Rotor Dynamics has become an irreplaceable point of reference for those working in the field and this book reflects the high quality and diversity of content that the conference continues to guarantee.
Download or read book Proceedings of the 11th International Conference on Robotics Vision Signal Processing and Power Applications written by Nor Muzlifah Mahyuddin and published by Springer Nature. This book was released on 2022-02-11 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceeding is a collection of research papers presented at the 11th International Conference on Robotics, Vision, Signal Processing & Power Applications (RoViSP 2021). The theme of RoViSP 2021 “Enhancing Research and Innovation through the Fourth Industrial Revolution (IR 4.0)” served as a platform for researchers, scientists, engineers, academicians as well as industrial professionals from all around the globe to present and exchange their research findings and development activities through oral presentations. The book covers various topics of interest, including: Robotics, Control, Mechatronics and Automation Telecommunication Systems and Applications Electronic Design and Applications Vision, Image and Signal Processing Electrical Power, Energy and Industrial Applications Computer and Information Technology Biomedical Engineering and Applications Intelligent Systems Internet-of-things Mechatronics Mobile Technology
Download or read book Proceedings of the 1993 International Conference on Parallel Processing written by C.Y. Roger Chen and published by CRC Press. This book was released on 1993-08-16 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume work presents a compendium of current and seminal papers on parallel/distributed processing offered at the 22nd International Conference on Parallel Processing, held August 16-20, 1993 in Chicago, Illinois. Topics include processor architectures; mapping algorithms to parallel systems, performance evaluations; fault diagnosis, recovery, and tolerance; cube networks; portable software; synchronization; compilers; hypercube computing; and image processing and graphics. Computer professionals in parallel processing, distributed systems, and software engineering will find this book essential to their complete computer reference library.
Download or read book Proceedings of the 4th International Conference on Electrical Engineering and Control Applications written by Sofiane Bououden and published by Springer Nature. This book was released on 2020-09-29 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented during the 4th International Conference on Electrical Engineering and Control Applications. It covers new control system models, troubleshooting tips and complex system requirements, such as increased speed, precision and remote capabilities. Additionally, the papers discuss not only the engineering aspects of signal processing and various practical issues in the broad field of information transmission, but also novel technologies for communication networks and modern antenna design. This book is intended for researchers, engineers and advanced postgraduate students in the fields of control and electrical engineering, computer science and signal processing, as well as mechanical and chemical engineering.
Download or read book Fault tolerant Control and Diagnosis for Integer and Fractional order Systems written by Rafael Martínez-Guerra and published by Springer Nature. This book was released on 2020-12-14 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about algebraic and differential methods, as well as fractional calculus, applied to diagnose and reject faults in nonlinear systems, which are of integer or fractional order. This represents an extension of a very important and widely studied problem in control theory, namely fault diagnosis and rejection (using differential algebraic approaches), to systems presenting fractional dynamics, i.e. systems whose dynamics are represented by derivatives and integrals of non-integer order. The authors offer a thorough overview devoted to fault diagnosis and fault-tolerant control applied to fractional-order and integer-order dynamical systems, and they introduce new methodologies for control and observation described by fractional and integer models, together with successful simulations and real-time applications. The basic concepts and tools of mathematics required to understand the methodologies proposed are all clearly introduced and explained. Consequently, the book is useful as supplementary reading in courses of applied mathematics and nonlinear control theory. This book is meant for engineers, mathematicians, physicists and, in general, to researchers and postgraduate students in diverse areas who have a minimum knowledge of calculus. It also contains advanced topics for researchers and professionals interested in the area of states and faults estimation.
Download or read book Diagnosis Fault Detection Tolerant Control written by Nabil Derbel and published by Springer Nature. This book was released on 2020-02-20 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on unhealthy cyber-physical systems. Consisting of 14 chapters, it discusses recognizing the beginning of the fault, diagnosing the appearance of the fault, and stopping the system or switching to a special control mode known as fault-tolerant control. Each chapter includes the background, motivation, quantitative development (equations), and case studies/illustration/tutorial (simulations, experiences, curves, tables, etc.). Readers can easily tailor the techniques presented to accommodate their ad hoc applications.
Download or read book Fault tolerant Flight Control and Guidance Systems written by Guillaume J. J. Ducard and published by Springer Science & Business Media. This book was released on 2009-05-14 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a complete overview of fault-tolerant flight control techniques. Discussion covers the necessary equations for the modeling of small UAVs, a complete system based on extended Kalman filters, and a nonlinear flight control and guidance system.
Download or read book Advanced Control of Electrical Drives and Power Electronic Converters written by Jacek Kabziński and published by Springer. This book was released on 2016-09-30 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume is written by key specialists working in multidisciplinary fields in electrical engineering, linking control theory, power electronics, artificial neural networks, embedded controllers and signal processing. The authors of each chapter report the state of the art of the various topics addressed and present results of their own research, laboratory experiments and successful applications. The presented solutions concentrate on three main areas of interest: · motion control in complex electromechanical systems, including sensorless control; · fault diagnosis and fault tolerant control of electric drives; · new control algorithms for power electronics converters. The chapters and the complete book possess strong monograph attributes. Important practical and theoretical problems are deeply and accurately presented on the background of an exhaustive state-of the art review. Many results are completely new and were never published before. Well-known control methods like field oriented control (FOC) or direct torque control (DTC) are referred as a starting point for modifications or are used for comparison. Among numerous control theories used to solve particular problems are: nonlinear control, robust control, adaptive control, Lyapunov techniques, observer design, model predictive control, neural control, sliding mode control, signal filtration and processing, fault diagnosis, and fault tolerant control.
Download or read book Advanced and Intelligent Computations in Diagnosis and Control written by Zdzisław Kowalczuk and published by Springer. This book was released on 2015-09-01 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the demands of research and industrial centers for diagnostics, monitoring and decision making systems that result from the increasing complexity of automation and systems, the need to ensure the highest level of reliability and safety, and continuing research and the development of innovative approaches to fault diagnosis. The contributions combine domains of engineering knowledge for diagnosis, including detection, isolation, localization, identification, reconfiguration and fault-tolerant control. The book is divided into six parts: (I) Fault Detection and Isolation; (II) Estimation and Identification; (III) Robust and Fault Tolerant Control; (IV) Industrial and Medical Diagnostics; (V) Artificial Intelligence; (VI) Expert and Computer Systems.
Download or read book Automation and Control written by Aleksandar Rodic and published by BoD – Books on Demand. This book was released on 2009-12-01 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present edited book is a collection of 18 chapters written by internationally recognized experts and well-known professionals of the field. Chapters contribute to diverse facets of automation and control. The volume is organized in four parts according to the main subjects, regarding the recent advances in this field of engineering. The first thematic part of the book is devoted to automation. This includes solving of assembly line balancing problem and design of software architecture for cognitive assembling in production systems. The second part of the book concerns different aspects of modelling and control. This includes a study on modelling pollutant emission of diesel engine, development of a PLC program obtained from DEVS model, control networks for digital home, automatic control of temperature and flow in heat exchanger, and non-linear analysis and design of phase locked loops. The third part addresses issues of parameter estimation and filter design, including methods for parameters estimation, control and design of the wave digital filters. The fourth part presents new results in the intelligent control. This includes building a neural PDF strategy for hydroelectric satation simulator, intelligent network system for process control, neural generalized predictive control for industrial processes, intelligent system for forecasting, diagnosis and decision making based on neural networks and self-organizing maps, development of a smart semantic middleware for the Internet , development of appropriate AI methods in fault-tollerant control, building expert system in rotary railcar dumpers, expert system for plant asset management, and building of a image retrieval system in heterogeneous database. The content of this thematic book admirably reflects the complementary aspects of theory and practice which have taken place in the last years. Certainly, the content of this book will serve as a valuable overview of theoretical and practical methods in control and automation to those who deal with engineering and research in this field of activities.
Download or read book Diagnostics and Prognostics of Engineering Systems Methods and Techniques written by Kadry, Seifedine and published by IGI Global. This book was released on 2012-09-30 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Prognostics predicts an industrial systems lifespan using probability measurements to determine the way a machine operates. Prognostics are essential in determining being able to predict and stop failures before they occur. Therefore the development of dependable prognostic procedures for engineering systems is important to increase the systems performance and reliability. Diagnostics and Prognostics of Engineering Systems: Methods and Techniques provides widespread coverage and discussions on the methods and techniques of diagnosis and prognosis systems. Including practical examples to display the methods effectiveness in real-world applications as well as the latest trends and research, this reference source aims to introduce fundamental theory and practice for system diagnosis and prognosis.
Download or read book Intelligent Systems Technologies and Applications written by Stefano Berretti and published by Springer. This book was released on 2015-08-28 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a selection of refereed and revised papers of Intelligent Techniques and Applications track, and the Special Track on Intelligent Image Processing and Artificial Vision track originally presented at the International Symposium on Intelligent Systems Technologies and Applications (ISTA), August 10-13, 2015, Kochi, India.
Download or read book Service Oriented Holonic and Multi agent Manufacturing Systems for Industry of the Future written by Theodor Borangiu and published by Springer Nature. This book was released on 2022-06-02 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the peer reviewed papers presented at the 11th edition of the International Workshop on Service-oriented, Holonic and Multi-Agent Manufacturing Systems for the Industry of the Future, SOHOMA’21, organized on 18-19 November, 2021 by the Arts et Métiers Institute of Technology of Cluny, France in collaboration with University Politehnica of Bucharest (the CIMR Research Centre in Computer Integrated Manufacturing and Robotics), Polytechnic University Hauts-de-France (the LAMIH Laboratory of Industrial and Human Automation Control, Mechanical Engineering and Computer Science) and Polytechnic Institute of Bragança (the CeDRI Research Centre in Digitalization and Intelligent Robotics).
Download or read book Soft Computing Theories and Applications written by Millie Pant and published by Springer Nature. This book was released on 2020-02-24 with total page 1403 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on soft computing and its applications to solve real-world problems in different domains, ranging from medicine and health care, to supply chain management, image processing and cryptanalysis. It includes high-quality papers presented at the International Conference on Soft Computing: Theories and Applications (SoCTA 2018), organized by Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India. Offering significant insights into soft computing for teachers and researchers alike, the book inspires more researchers to work in the field of soft computing.
Download or read book Diagnosis and Fault tolerant Control Volume 2 written by Vicenc Puig and published by John Wiley & Sons. This book was released on 2021-12-29 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in fault diagnosis and fault-tolerant control of dynamic processes. Its impetus derives from the need for an overview of the challenges of the fault diagnosis technique and sustainable control, especially for those demanding systems that require reliability, availability, maintainability, and safety to ensure efficient operations. Moreover, the need for a high degree of tolerance with respect to possible faults represents a further key point, primarily for complex systems, as modeling and control are inherently challenging, and maintenance is both expensive and safety-critical. Diagnosis and Fault-tolerant Control 2 also presents and compares different fault diagnosis and fault-tolerant schemes, using well established, innovative strategies for modeling the behavior of the dynamic process under investigation. An updated treatise of diagnosis and fault-tolerant control is addressed with the use of essential and advanced methods including signal-based, model-based and data-driven techniques. Another key feature is the application of these methods for dealing with robustness and reliability.
Download or read book Proceedings of the TEPEN International Workshop on Fault Diagnostic and Prognostic written by Zuolu Wang and published by Springer Nature. This book was released on with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
