Download or read book IWarp written by Thomas Gross and published by MIT Press. This book was released on 1998 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the complete iWarp system, from instruction-level parallelism to final parallel applications. The authors present a range of issues that must be considered to get a real system into practice. foreword by Gordon Bell and afterword by H.T. Kung Although researchers have proposed many mechanisms and theories for parallel systems, only a few have actually resulted in working computing platforms. The iWarp is an experimental parallel system that was designed and built jointly by Carnegie Mellon University and Intel Corporation. The system is based on the idea of integrating a VLIW processor and a sophisticated fine-grained communication system on a single chip. This book describes the complete iWarp system, from instruction-level parallelism to final parallel applications. The authors present a range of issues that must be considered to get a real system into practice. They also provide a start-to-finish history of the project, including what was done right and what was done wrong, that will be of interest to anyone who studies or builds computer systems.

Download or read book Computation Cognition written by Charles William Gear and published by SIAM. This book was released on 1991-01-01 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theme of the symposium, computation and cognition, was designed to explore the relations between very different modes of computation, and to bring together views of the computation process from different disciplines.

Download or read book Signal written by and published by . This book was released on 1990 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital Signal Processing for Multimedia Systems written by Keshab K. Parhi and published by CRC Press. This book was released on 1999-03-11 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses a wide selection of multimedia applications, programmable and custom architectures for the implementations of multimedia systems, and arithmetic architectures and design methodologies. The book covers recent applications of digital signal processing algorithms in multimedia, presents high-speed and low-priority binary and finite field arithmetic architectures, details VHDL-based implementation approaches, and more.

Download or read book Frontiers of Supercomputing II written by Karyn R. Ames and published by Univ of California Press. This book was released on 2023-11-10 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This uniquely comprehensive book brings together the vast amount of technical, economic, and political information and the analyses of supercomputing that have hitherto been buried in the frequently inaccessible "gray literature." Seventy-nine distinguished participants in the second Frontiers of Supercomputing conference offer perceptive and often controversial views on the emerging computing environment in the United States. This title is part of UC Press's Voices Revived program, which commemorates University of California Press’s mission to seek out and cultivate the brightest minds and give them voice, reach, and impact. Drawing on a backlist dating to 1893, Voices Revived makes high-quality, peer-reviewed scholarship accessible once again using print-on-demand technology. This title was originally published in 1994.

Download or read book Parallel Supercomputing in MIMD Architectures written by R.Michael Hord and published by CRC Press. This book was released on 2018-02-01 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel Supercomputing in MIMD Architectures is devoted to supercomputing on a wide variety of Multiple-Instruction-Multiple-Data (MIMD)-class parallel machines. This book describes architectural concepts, commercial and research hardware implementations, major programming concepts, algorithmic methods, representative applications, and benefits and drawbacks. Commercial machines described include Connection Machine 5, NCUBE, Butterfly, Meiko, Intel iPSC, iPSC/2 and iWarp, DSP3, Multimax, Sequent, and Teradata. Research machines covered include the J-Machine, PAX, Concert, and ASP. Operating systems, languages, translating sequential programs to parallel, and semiautomatic parallelizing are aspects of MIMD software addressed in Parallel Supercomputing in MIMD Architectures. MIMD issues such as scalability, partitioning, processor utilization, and heterogenous networks are discussed as well.This book is packed with important information and richly illustrated with diagrams and tables, Parallel Supercomputing in MIMD Architectures is an essential reference for computer professionals, program managers, applications system designers, scientists, engineers, and students in the computer sciences.

Download or read book Handbook on Data Centers written by Samee U. Khan and published by Springer. This book was released on 2015-03-16 with total page 1309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook offers a comprehensive review of the state-of-the-art research achievements in the field of data centers. Contributions from international, leading researchers and scholars offer topics in cloud computing, virtualization in data centers, energy efficient data centers, and next generation data center architecture. It also comprises current research trends in emerging areas, such as data security, data protection management, and network resource management in data centers. Specific attention is devoted to industry needs associated with the challenges faced by data centers, such as various power, cooling, floor space, and associated environmental health and safety issues, while still working to support growth without disrupting quality of service. The contributions cut across various IT data technology domains as a single source to discuss the interdependencies that need to be supported to enable a virtualized, next-generation, energy efficient, economical, and environmentally friendly data center. This book appeals to a broad spectrum of readers, including server, storage, networking, database, and applications analysts, administrators, and architects. It is intended for those seeking to gain a stronger grasp on data center networks: the fundamental protocol used by the applications and the network, the typical network technologies, and their design aspects. The Handbook of Data Centers is a leading reference on design and implementation for planning, implementing, and operating data center networks.

Download or read book Gigabit ATM Monthly Newsletter November 2009 written by and published by Information Gatekeepers Inc. This book was released on with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Encyclopedia of Parallel Computing written by David Padua and published by Springer Science & Business Media. This book was released on 2011-09-08 with total page 2211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 300 entries in an A-Z format, the Encyclopedia of Parallel Computing provides easy, intuitive access to relevant information for professionals and researchers seeking access to any aspect within the broad field of parallel computing. Topics for this comprehensive reference were selected, written, and peer-reviewed by an international pool of distinguished researchers in the field. The Encyclopedia is broad in scope, covering machine organization, programming languages, algorithms, and applications. Within each area, concepts, designs, and specific implementations are presented. The highly-structured essays in this work comprise synonyms, a definition and discussion of the topic, bibliographies, and links to related literature. Extensive cross-references to other entries within the Encyclopedia support efficient, user-friendly searchers for immediate access to useful information. Key concepts presented in the Encyclopedia of Parallel Computing include; laws and metrics; specific numerical and non-numerical algorithms; asynchronous algorithms; libraries of subroutines; benchmark suites; applications; sequential consistency and cache coherency; machine classes such as clusters, shared-memory multiprocessors, special-purpose machines and dataflow machines; specific machines such as Cray supercomputers, IBM’s cell processor and Intel’s multicore machines; race detection and auto parallelization; parallel programming languages, synchronization primitives, collective operations, message passing libraries, checkpointing, and operating systems. Topics covered: Speedup, Efficiency, Isoefficiency, Redundancy, Amdahls law, Computer Architecture Concepts, Parallel Machine Designs, Benmarks, Parallel Programming concepts & design, Algorithms, Parallel applications. This authoritative reference will be published in two formats: print and online. The online edition features hyperlinks to cross-references and to additional significant research. Related Subjects: supercomputing, high-performance computing, distributed computing

Download or read book Massively Parallel Optical and Neural Computing in the United States written by Gilbert Kalb and published by IOS Press. This book was released on 1992 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: A survey of products and research projects in the field of highly parallel, optical and neural computers in the USA. It covers operating systems, language projects and market analysis, as well as optical computing devices and optical connections of electronic parts.

Download or read book High Performance Computing HiPC 2008 written by P. Sadayappan and published by Springer. This book was released on 2008-12-17 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 15th International Conference on High-Performance Computing, HiPC 2008, held in Bangalore, India, in December 2008. The 46 revised full papers presented together with the abstracts of 5 keynote talks were carefully reviewed and selected from 317 submissions. The papers are organized in topical sections on applications performance optimizazion, parallel algorithms and applications, scheduling and resource management, sensor networks, energy-aware computing, distributed algorithms, communication networks as well as architecture.

Download or read book Attaining High Performance Communications written by Ada Gavrilovska and published by CRC Press. This book was released on 2016-04-19 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: No single solution applied at one particular layer can help applications solve all performance-related issues with communication services. Instead, this book shows that a coordinated effort is needed among the layers. It covers many different types of technologies and layers across the stack, from the architectural features of the hardware, through the protocols and their implementation in operating system kernels, to the manner in which application services and middleware are using underlying platforms. The book also describes key developments in high-end platforms, high performance interconnection fabrics and communication libraries, and multi- and many-core systems.

Download or read book Designing SOCs with Configured Cores written by Steve Leibson and published by Elsevier. This book was released on 2006-08-15 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microprocessor cores used for SOC design are the direct descendents of Intel’s original 4004 microprocessor. Just as packaged microprocessor ICs vary widely in their attributes, so do microprocessors packaged as IP cores. However, SOC designers still compare and select processor cores the way they previously compared and selected packaged microprocessor ICs. The big problem with this selection method is that it assumes that the laws of the microprocessor universe have remained unchanged for decades. This assumption is no longer valid. Processor cores for SOC designs can be far more plastic than microprocessor ICs for board-level system designs. Shaping these cores for specific applications produces much better processor efficiency and much lower system clock rates. Together, Tensilica’s Xtensa and Diamond processor cores constitute a family of software-compatible microprocessors covering an extremely wide performance range from simple control processors, to DSPs, to 3-way superscalar processors. Yet all of these processors use the same software-development tools so that programmers familiar with one processor in the family can easily switch to another. This book emphasizes a processor-centric MPSOC (multiple-processor SOC) design style shaped by the realities of the 21st-century and nanometer silicon. It advocates the assignment of tasks to firmware-controlled processors whenever possible to maximize SOC flexibility, cut power dissipation, reduce the size and number of hand-built logic blocks, shrink the associated verification effort, and minimize the overall design risk. · An essential, no-nonsense guide to the design of 21st-century mega-gate SOCs using nanometer silicon. · Discusses today's key issues affecting SOC design, based on author's decades of personal experience in developing large digital systems as a design engineer while working at Hewlett-Packard's Desktop Computer Division and at EDA workstation pioneer Cadnetix, and covering such topics as an award-winning technology journalist and editor-in-chief for EDN magazine and the Microprocessor Report. · Explores conventionally accepted boundaries and perceived limits of processor-based system design and then explodes these artificial constraints through a fresh outlook on and discussion of the special abilities of processor cores designed specifically for SOC design. · Thorough exploration of the evolution of processors and processor cores used for ASIC and SOC design with a look at where the industry has come from, and where it's going. · Easy-to-understand explanations of the capabilities of configurable and extensible processor cores through a detailed examination of Tensilica's configurable, extensible Xtensa processor core and six pre-configured Diamond cores. · The most comprehensive assessment available of the practical aspects of configuring and using multiple processor cores to achieve very difficult and ambitious SOC price, performance, and power design goals.

Download or read book Beginning GIMP written by Akkana Peck and published by Apress. This book was released on 2009-03-12 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The GIMP Version 2.4 will be released end of 2005. We’ll likely be first to market a book about the new version. Other books are pre-Version 2.4 and very outdated Takes a project-based approach. Reader will be taught through real-world examples and projects immediately applicable for their own work GIMP is an emerging technology in Open Source that has been making big headlines. Was used to make the Scooby-Doo movie and the official mascot of Linux (Tux) GIMP works on Mac OSX, Linux, and Windows. This book shows how to install it on each platform.

Download or read book Parallel Architectures and Parallel Algorithms for Integrated Vision Systems written by Alok N. Choudary and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer vision is one of the most complex and computationally intensive problem. Like any other computationally intensive problems, parallel pro cessing has been suggested as an approach to solving the problems in com puter vision. Computer vision employs algorithms from a wide range of areas such as image and signal processing, advanced mathematics, graph theory, databases and artificial intelligence. Hence, not only are the comput ing requirements for solving vision problems tremendous but they also demand computers that are efficient to solve problems exhibiting vastly dif ferent characteristics. With recent advances in VLSI design technology, Single Instruction Multiple Data (SIMD) massively parallel computers have been proposed and built. However, such architectures have been shown to be useful for solving a very limited subset of the problems in vision. Specifically, algorithms from low level vision that involve computations closely mimicking the architec ture and require simple control and computations are suitable for massively parallel SIMD computers. An Integrated Vision System (IVS) involves com putations from low to high level vision to be executed in a systematic fashion and repeatedly. The interaction between computations and information dependent nature of the computations suggests that architectural require ments for computer vision systems can not be satisfied by massively parallel SIMD computers.

Download or read book Handbook of Fiber Optic Data Communication written by Manoj Wadekar and published by Elsevier Inc. Chapters. This book was released on 2013-08-09 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter describes the InfiniBand (IB) industry standard and network architecture. IB features such as zero-copy and remote direct memory access (RDMA) help reduce processor overhead by directly transferring data from sender memory to receiver memory without involving host processors. This chapter covers overall IB architecture and its various layers, with an emphasis on link and network layers, Channel Adapters, switches, and routers. Concepts discussed include IPv6 and Ethernet datagrams, packet formats, speed and width negotiations, buffering, flow control, and Q-pairs. Emerging protocols for providing RDMA functions to other applications are discussed, including RoCE and iWARP.

Download or read book Handbook of Fiber Optic Data Communication written by Casimer DeCusatis and published by Academic Press. This book was released on 2013-08-09 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4th edition of this popular Handbook continues to provide an easy-to-use guide to the many exciting new developments in the field of optical fiber data communications. With 90% new content, this edition contains all new material describing the transformation of the modern data communications network, both within the data center and over extended distances between data centers, along with best practices for the design of highly virtualized, converged, energy efficient, secure, and flattened network infrastructures. Key topics include networks for cloud computing, software defined networking, integrated and embedded networking appliances, and low latency networks for financial trading or other time-sensitive applications. Network architectures from the leading vendors are outlined (including Smart Analytic Solutions, Qfabric, FabricPath, and Exadata) as well as the latest revisions to industry standards for interoperable networks, including lossless Ethernet, 16G Fiber Channel, RoCE, FCoE, TRILL, IEEE 802.1Qbg, and more. Written by experts from IBM, HP, Dell, Cisco, Ciena, and Sun/ Oracle Case studies and ‘How to...’ demonstrations on a wide range of topics, including Optical Ethernet, next generation Internet, RDMA and Fiber Channel over Ethernet Quick reference tables of all the key optical network parameters for protocols like ESCON, FICON, and SONET/ATM and a glossary of technical terms and acronyms