Download or read book IUTAM Symposium on Optimization of Mechanical Systems written by D. Bestle and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Union of Theoretical and Applied Mechanics (IUTAM) initiated and sponsored an International Symposium on Optimization of Mechanical Systems held in 1995 in Stuttgart, Germany. The Symposium was intended to bring together scientists working in different fields of optimization to exchange ideas and to discuss new trends with special emphasis on multi body systems. A Scientific Committee was appointed by the Bureau of IUTAM with the following members: S. Arimoto (Japan) EL. Chernousko (Russia) M. Geradin (Belgium) E.J. Haug (U.S.A.) C.A.M. Soares (Portugal) N. Olhoff (Denmark) W.O. Schiehlen (Germany, Chairman) K. Schittkowski (Germany) R.S. Sharp (U.K.) W. Stadler (U.S.A.) H.-B. Zhao (China) This committee selected the participants to be invited and the papers to be presented at the Symposium. As a result of this procedure, 90 active scientific participants from 20 countries followed the invitation, and 49 papers were presented in lecture and poster sessions.
Download or read book IUTAM Symposium on Optimization of Mechanical Systems written by Dieter Bestle and published by . This book was released on 1996 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IUTAM Symposium on Interaction Between Dynamics and Control in Advanced Mechanical Systems written by Dick H. van Campen and published by Springer. This book was released on 1997-03-31 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the April 1996 symposium address a wide variety of applications ranging from vehicle systems to mechatronic systems. Further, they illuminate the relevancy of more fundamental areas such as control of chaos and optimal control. The 51 contributions promote theoretical and applied investigations with respect to the interaction of dynamics and control in advanced engineering applications. Additional topics include motion control, dynamics and bifurcation of nonlinear systems, modelling and dynamics of engineering systems, vibration control, adaptive control, optimization and control, mechatronic systems, modelling control of engineering systems, system identification, and analysis and control of nonlinear systems. Papers are arranged alphabetically, by the first author's last name, and there is an author index only (no subject index). Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book IUTAM Symposium on Interaction between Dynamics and Control in Advanced Mechanical Systems written by Dick H. van Campen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decades, applications of dynamical analysis in advanced, often nonlinear, engineering systems have been evolved in a revolutionary way. In this context one can think of applications in aerospace engineering like satellites, in naval engineering like ship motion, in mechanical engineering like rotating machinery, vehicle systems, robots and biomechanics, and in civil engineering like earthquake dynamics and offshore technology. One could continue with this list for a long time. The application of advanced dynamics in the above fields has been possible due to the use of sophisticated computational techniques employing powerful concepts of nonlinear dynamics. These concepts have been and are being developed in mathematics, mechanics and physics. It should be remarked that careful experimental studies are vitally needed to establish the real existence and observability of the predicted dynamical phenomena. The interaction between nonlinear dynamics and nonlinear control in advanced engineering systems is becoming of increasing importance because of several reasons. Firstly, control strategies in nonlinear systems are used to obtain desired dynamic behaviour and improved reliability during operation, Applications include power plant rotating machinery, vehicle systems, robotics, etc. Terms like motion control, optimal control and adaptive control are used in this field of interest. Since mechanical and electronic components are often necessary to realize the desired action in practice, the engineers use the term mechatronics to indicate this field. If the desired dynamic behaviour is achieved by changing design variables (mostly called system parameters), one can think of fields like control of chaos.
Download or read book Dynamical Problems of Rigid Elastic Systems and Structures written by N.V. Banichuk and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Union of Theoretical and Applied Mechanics (IUTAM) initiated and supported an International Symposium on Dynamical Problems for Rigid-elastic Systems and Structures held in 1990 in Moscow, USSR. The Symposium was intended to bring together scientists working in the fields of multibody system dynamics and finite element systems with special emphasis to modeling, simulation, optimization and control. A Scientific Committee was appointed by the Bureau of IUTAM with following members: N.V. Banichuk (USSR). E.J. Haug (USA). Y. Hori (Japan). S. Kaliszky (Hungary), D.M. Klimov (USSR). Chairman, L. Lilov (Bulgaria), F. Niordson (Denmark), B. Roth (USA), W. Schiehlen (Germany), G. Schmidt (Germany), J. Wittenburg (Germany). The chairman invited the participants on recommendation by the Scientific Committee. As a result 48 active scientific participants from 11 countries followed the invitation, and 32 papers were presented in lecture sessions. The available manuscripts were reviewed by the Scientific Committee after the Symposium, and 24 of them are collected in this volume. At the Symposium a tour to the Institute for Problems of Mechanics, USSR Academy of Sciences, was arranged. The scientific lectures were devoted to the following topics: o Modeling and Optimization, o Dynamics of Systems with Elastic Constraints, o Vibrations, o Multibody Systems.
Download or read book IUTAM Symposium on Vibration Control of Nonlinear Mechanisms and Structures written by H. Ulbrich and published by Springer Science & Business Media. This book was released on 2006-01-28 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decades, the growth of micro-electronics has reduced the cost of computing power to a level acceptable to industry and has made possible sophisticated control strategies suitable for many applications. Vibration c- trol is applied to all kinds of engineering systems to obtain the desired dynamic behavior, improved accuracy and increased reliability during operation. In this context, one can think of applications related to the control of structures’ vib- tion isolation, control of vehicle dynamics, noise control, control of machines and mechanisms and control of ?uid-structure-interaction. One could continue with this list for a long time. Research in the ?eld of vibration control is extremely comprehensive. Pr- lems that are typical for vibration control of nonlinear mechanisms and str- tures arise in the ?elds of modeling systems in such a way that the model is suitable for control design, to choose appropriate actuator and sensor locations and to select the actuators and sensors. Theobjective of the Symposium was to present anddiscuss methodsthat contribute to thesolution of such problems and to demonstrate the state of the art inthe ?eld shown by typical examples. The intention was to evaluate the limits of performance that can beachievedby controlling the dynamics, and to point out gaps in present research and give links for areas offuture research.Mainly, it brought together leading experts from quite different areas presenting theirpoints of view.
Download or read book Nonlinear and Stochastic Dynamics of Compliant Offshore Structures written by Seon Mi Han and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this monograph is to show how a compliant offshore structure in an ocean environment can be modeled in two and three di mensions. The monograph is divided into five parts. Chapter 1 provides the engineering motivation for this work, that is, offshore structures. These are very complex structures used for a variety of applications. It is possible to use beam models to initially study their dynamics. Chapter 2 is a review of variational methods, and thus includes the topics: princi ple of virtual work, D'Alembert's principle, Lagrange's equation, Hamil ton's principle, and the extended Hamilton's principle. These methods are used to derive the equations of motion throughout this monograph. Chapter 3 is a review of existing transverse beam models. They are the Euler-Bernoulli, Rayleigh, shear and Timoshenko models. The equa tions of motion are derived and solved analytically using the extended Hamilton's principle, as outlined in Chapter 2. For engineering purposes, the natural frequencies of the beam models are presented graphically as functions of normalized wave number and geometrical and physical pa rameters. Beam models are useful as representations of complex struc tures. In Chapter 4, a fluid force that is representative of those that act on offshore structures is formulated. The environmental load due to ocean current and random waves is obtained using Morison's equa tion. The random waves are formulated using the Pierson-Moskowitz spectrum with the Airy linear wave theory.
Download or read book Thin Walled Composite Beams written by Liviu Librescu and published by Springer Science & Business Media. This book was released on 2006-01-15 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is the first monograph devoted to the foundation of the theory of composite anisotropic thin-walled beams and to its applications in various problems involving the aeronautical/aerospace, helicopter, naval and mechanical structures. Throughout the theoretical part, an effort was made to provide the treatment of the subject by using the equations of the 3-D elasticity theory. Non-classical effects such as transverse shear, warping constraint, anisotropy of constituent materials yielding the coupling of twist-bending (lateral), bending (transversal)-extension have been included and their implications have been thoroughly analyzed. Thermal effects have been included and in order to be able to circumvent their deleterious effects, functionally graded materials have been considered in their construction. Implications of the application of the tailoring technique and of the active feedback control on free vibration, dynamic response, instability and aeroelasticity of such structures have been amply investigated. Special care was exercised throughout this work to address and validate the adopted solution methodologies and the obtained results against those available in the literature and obtained via numerical or experimental means.
Download or read book Direct Methods for Solving the Boltzmann Equation and Study of Nonequilibrium Flows written by V.V. Aristov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the methods of solving the nonlinear Boltz mann equation and of investigating its possibilities for describing some aerodynamic and physical problems. This monograph is a sequel to the book 'Numerical direct solutions of the kinetic Boltzmann equation' (in Russian) which was written with F. G. Tcheremissine and published by the Computing Center of the Russian Academy of Sciences some years ago. The main purposes of these two books are almost similar, namely, the study of nonequilibrium gas flows on the basis of direct integration of the kinetic equations. Nevertheless, there are some new aspects in the way this topic is treated in the present monograph. In particular, attention is paid to the advantages of the Boltzmann equation as a tool for considering nonequi librium, nonlinear processes. New fields of application of the Boltzmann equation are also described. Solutions of some problems are obtained with higher accuracy. Numerical procedures, such as parallel computing, are in vestigated for the first time. The structure and the contents of the present book have some com mon features with the monograph mentioned above, although there are new issues concerning the mathematical apparatus developed so that the Boltzmann equation can be applied for new physical problems. Because of this some chapters have been rewritten and checked again and some new chapters have been added.
Download or read book Self Consistent Methods for Composites written by S.K. Kanaun and published by Springer Science & Business Media. This book was released on 2008-05-20 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book is dedicated to the application of self-consistent methods to the solution of static and dynamic problems of the mechanics and physics of composite materials. The effective elastic, electric, dielectric, thermo-conductive and other properties of composite materials reinforced by ellipsoidal, spherical multi-layered inclusions, thin hard and soft inclusions, short fibers and unidirected multi-layered fibers are considered. The book contains many concrete results.
Download or read book The Behavior of Structures Composed of Composite Materials written by Jack R. Vinson and published by Springer. This book was released on 2006-04-11 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite structures and products have developed tremendously since the publication of the first edition of this work in 1986. This new edition of the now classic 1986 text has been written to educate the engineering reader in the various aspects of mechanics for using composite materials in the design and analysis of composite structures and products. Areas dealt with include manufacture, micromechanical properties, structural design, joints and bonding and a much needed introduction to composite design philosophy. Each chapter is concluded by numerous problems suitable for home assignments or examination. A solution guide is available on request from the authors.
Download or read book Optimal Control from Theory to Computer Programs written by Viorel Arnăutu and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present the mathematical theory and the know-how to make computer programs for the numerical approximation of Optimal Control of PDE's. The computer programs are presented in a straightforward generic language. As a consequence they are well structured, clearly explained and can be translated easily into any high level programming language. Applications and corresponding numerical tests are also given and discussed. To our knowledge, this is the first book to put together mathematics and computer programs for Optimal Control in order to bridge the gap between mathematical abstract algorithms and concrete numerical ones. The text is addressed to students and graduates in Mathematics, Mechanics, Applied Mathematics, Numerical Software, Information Technology and Engineering. It can also be used for Master and Ph.D. programs.
Download or read book A Modern Course in Aeroelasticity written by Robert Clark and published by Springer Science & Business Media. This book was released on 2006-01-24 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new edition, the fundamental material on classical linear aeroelasticity has been revised. Also new material has been added describing recent results on the research frontiers dealing with nonlinear aeroelasticity as well as major advances in the modelling of unsteady aerodynamic flows using the methods of computational fluid dynamics and reduced order modeling techniques. New chapters on aeroelasticity in turbomachinery and aeroelasticity and the latter chapters for a more advanced course, a graduate seminar or as a reference source for an entrée to the research literature.
Download or read book IUTAM Symposium on Advances in Nonlinear Stochastic Mechanics written by A. Naess and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUTAM Symposium on Advances in Nonlinear Stochastic Mechanics, held in Trondheim July 3-7, 1995, was the eighth of a series of IUTAM sponsored symposia which focus on the application of stochastic methods in mechanics. The previous meetings took place in Coventry, UK (1972), Sout'hampton, UK (1976), FrankfurtjOder, Germany (1982), Stockholm, Sweden (1984), Innsbruckjlgls, Austria (1987), Turin, Italy (1991) and San Antonio, Texas (1993). The symposium provided an extraordinary opportunity for scholars to meet and discuss recent advances in stochastic mechanics. The participants represented a wide range of expertise, from pure theoreticians to people primarily oriented toward applications. A significant achievement of the symposium was the very extensive discussions taking place over the whole range from highly theoretical questions to practical engineering applications. Several presentations also clearly demonstrated the substantial progress that has been achieved in recent years in terms of developing and implement ing stochastic analysis techniques for mechanical engineering systems. This aspect was further underpinned by specially invited extended lectures on computational stochastic mechanics, engineering applications of stochastic mechanics, and nonlinear active control. The symposium also reflected the very active and high-quality research taking place in the field of stochastic stability. Ten presentations were given on this topic ofa total of47 papers. A main conclusion that can be drawn from the proceedings of this symposium is that stochastic mechanics as a subject has reached great depth and width in both methodology and applicability.
Download or read book Functional Analysis written by Leonid P. Lebedev and published by Springer Science & Business Media. This book was released on 2006-04-29 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book started its life as a series of lectures given by the second author from the 1970’s onwards to students in their third and fourth years in the Department of Mechanics and Mathematics at Rostov State University. For these lectures there was also an audience of engineers and applied mechanicists who wished to understand the functional analysis used in contemporary research in their fields. These people were not so much interested in functional analysis itself as in its applications; they did not want to be told about functional analysis in its most abstract form, but wanted a guided tour through those parts of the analysis needed for their applications. The lecture notes evolved over the years as the first author started to make more formal typewritten versions incorporating new material. About 1990 the first author prepared an English version and submitted it to Kluwer Academic Publishers for inclusion in the series Solid Mechanics and its Applications. At that state the notes were divided into three long chapters covering linear and nonlinear analysis. As Series Editor, the third author started to edit them. The requirements of lecture notes and books are vastly different. A book has to be complete (in some sense), self contained, and able to be read without the help of an instructor.
Download or read book Virtual Nonlinear Multibody Systems written by Werner Schiehlen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains an edited versIOn of lectures presented at the NATO ADVANCED STUDY INSTITUTE on VIRTUAL NONLINEAR MUL TIBODY SYSTEMS which was held in Prague, Czech Republic, from 23 June to 3 July 2002. It was organized by the Department of Mechanics, Faculty of Mechanical Engineering, Czech Technical University in Prague, in cooperation with the Institute B of Mechanics, University of Stuttgart, Germany. The ADVANCED STUDY INSTITUTE addressed the state of the art in multibody dynamics placing special emphasis on nonlinear systems, virtual reality, and control design as required in mechatronics and its corresponding applications. Eighty-six participants from twenty-two countries representing academia, industry, government and research institutions attended the meeting. The high qualification of the participants contributed greatly to the success of the ADVANCED STUDY INSTITUTE in that it promoted the exchange of experience between leading scientists and young scholars, and encouraged discussions to generate new ideas and to define directions of research and future developments. The full program of the ADVANCED STUDY INSTITUTE included also contributed presentations made by participants where different topics were explored, among them: Such topics include: nonholonomic systems; flexible multibody systems; contact, impact and collision; numerical methods of differential-algebraical equations; simulation approaches; virtual modelling; mechatronic design; control; biomechanics; space structures and vehicle dynamics. These presentations have been reviewed and a selection will be published in this volume, and in special issues of the journals Multibody System Dynamics and Mechanics of Structures and Machines.
Download or read book IUTAM Symposium on Dynamics Modeling and Interaction Control in Virtual and Real Environments written by Gábor Stépán and published by Springer Science & Business Media. This book was released on 2011-07-01 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the invited papers presented at the IUTAM Symposium on Multibody Dynamics and Interaction Control in Virtual and Real Environments held in Budapest, Hungary, June 7−11 2010. The symposium aimed to bring together specialists in the fields of multibody system modeling, contact/collision mechanics and control of mechanical systems. The offered topics included modeling aspects, mechanical and mathematical models, the question of neglections and simplifications, reduction of large systems, interaction with environment like air, water and obstacles, contact of all types, control concepts, control stability and optimization. Discussions between experts in these fields made it possible to exchange ideas about the recent advances in multibody system modeling and interaction control, as well as about the possible future trends. The presentations of recent scientific results may facilitate the interaction between scientific areas like system/control engineering and mechanical engineering. Papers on dynamics modeling and interaction control were selected to cover the main areas: mathematical modeling, dynamic analysis, friction modeling, solid and thermomechanical aspects, and applications. A significant outcome of the meeting was the opening towards applications that are of key importance to the future of nonlinear dynamics.
