Download or read book IUTAM Symposium on Non Linear Singularities in Deformation and Flow written by D. Durban and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUTAM Symposium on "Non-Linear Singularities in Defonnation and Flow" took place from March 17 to 21, 1997, at the Technion in Haifa, Israel, with 70 participants from 12 countries. The leitmotif of this Symposium brought together scientists working on singularity-dominated local fields in various branches of continuum mechanics, covering traditional solid and liquid behaviour as well as that of more complex non-linear materials; non-linearities arise either from the constitutive equations for the material or from the presence of interfaces or both. The scientific committee invited speakers who presented 34 papers in 12 sessions. Topics covered in the lectures included near tip fields of cracks, notches and wedges; flow around comers, wedges and cones; interfacial phenomena; moving contact lines in multiphase systems; cusps in fluid interfaces and shocks and localization. There was a general consensus among the participants that singularities induced by non-linearities provide a challenging and currently important area of research in mechanics, engineering and applied mathematics. Presentation and discussions during the symposium initiated further studies of problems in these interesting areas. This volume contains 30 full length papers, submitted by the lecturers after the symposium and reviewed to the standards of international scientific periodicals. It is our pleasure to acknowledge the efficient and tireless help of Mrs. Alice Goodman and Mr. Gideon Wachsman of the Faculty of Aerospace Engineering at the Technion. David Durban Anthony Pearson Haifa Cambridge April 1998 IX International Scientific Committee C. Atkinson (UK) G. I. Barenblatt (USA) H. -c.
Download or read book IUTAM Symposium on Nonlinear Waves in Multi Phase Flow written by H.-C. Chang and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The active field of multi-phase flow has undergone fundamental changes in the last decade. Many salient complex interfacial dynamics of such flows are now understood at a basic level with precise mathematical and quantitative characterization. This is quite a departure from the traditional empirical approach. At an IUTAM Symposium at Notre Dame, in 1999, some of the leading researchers in the field gathered to review the progress thus far and to contemplate future directions. Their reports are summarized in this Proceedings. Topics covered include solitary wave dynamics on viscous film flows, sheet formation and drop entrainment in stratified flow, wetting and dewetting dynamics, self-similar drop formation dynamics, waves in bubbly and suspension flow, and bubble dynamics. It is a unique and essential reference for applied mathematicians, physicists, research engineers, and graduate students to keep abreast of the latest theoretical and numerical developments that promise to transform multi-phase flow research.
Download or read book Singular Solutions in Plasticity written by Sergei Alexandrov and published by Springer. This book was released on 2017-07-12 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with singular solutions that appear in the vicinity of maximum friction surfaces for several rigid plastic models. In particular, it discusses precise asymptotic expansions as a necessary ingredient for the development of efficient numerical methods to solve boundary value problems that involve the maximum friction law as a boundary condition. An applied aspect of the singular solutions considered is that these solutions are capable of predicting the development of narrow hard layers near frictional interfaces in manufacturing processes.
Download or read book Capillary Flows with Forming Interfaces written by Yulii D. Shikhmurzaev and published by CRC Press. This book was released on 2007-09-14 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Capillary Flows with Forming Interfaces explores numerous theoretical problems that arise in the mathematical description of capillary flows. It focuses on developing a unified approach to a variety of seemingly very different capillary flows of practical importance where classical fluid mechanics leads to nonphysical results. The book begin
Download or read book Slow Viscous Flows written by P. N. Shankar and published by Imperial College Press. This book was released on 2007 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an account of internal, external and unsteady slow viscous flows, including the advances. This book shows how the method of eigenfunctions, in conjunction with least squares, can be used to solve problems of low Reynolds number flows, including three-dimensional internal and unsteady flows.
Download or read book Mechanical Behaviors of Carbon Nanotubes written by K.M. Liew and published by William Andrew. This book was released on 2016-12-25 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Behaviors of Carbon Nanotubes: Theoretical and Numerical Approaches presents various theoretical and numerical studies on mechanical behaviors of carbon nanotubes. The main theoretical aspects included in the book contain classical molecular dynamics simulation, atomistic-continuum theory, atomic finite element method, continuum plate, nonlocal continuum plate, and shell models. Detailed coverage is also given to structural and elastic properties, trace of large deformation, buckling and post-buckling behaviors, fracture, vibration characteristics, wave propagation, and the most promising engineering applications. This book not only illustrates the theoretical and numerical methods for analyzing the mechanical behavior of carbon nanotubes, but also contains computational results from experiments that have already taken place. Covers various theoretical and numerical studies, giving readers a greater understanding of the mechanical behavior of carbon nanotubes Includes multiscale methods that provide the advantages of atomistic and continuum approaches, helping readers solve complex, large-system engineering problems Allows engineers to create more efficient carbon nanotube structures and devices
Download or read book Ventilator Induced Lung Injury written by Didier Dreyfuss and published by CRC Press. This book was released on 2006-03-21 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference surveys current best practices in the prevention and management of ventilator-induced lung injury (VILI) and spans the many pathways and mechanisms of VILI including cell injury and repair, the modulation of alveolar-capillary barrier properties, and lung and systemic inflammatory consequences of injurous mechanical ventilation. Cons
Download or read book Convection in Fluids written by Radyadour Kh. Zeytounian and published by Springer Science & Business Media. This book was released on 2009-07-21 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph, entirely devoted to “Convection in Fluids”, presents a unified rational approach of various convective phenomena in fluids (mainly considered as a thermally perfect gas or an expansible liquid), where the main driving mechanism is the buoyancy force (Archimedean thrust) or temperature-dependent surface tension in homogeneities (Marangoni effect). Also, the general mathematical formulation (for instance, in the Bénard problem - heated from below) and the effect of free surface deformation are taken into account. In the case of atmospheric thermal convection, the Coriolis force and stratification effects are also considered. This volume gives a rational and analytical analysis of the above mentioned physical effects on the basis of the full unsteady Navier-Stokes and Fourier (NS-F) equations - for a Newtonian compressible viscous and heat-conducting fluid - coupled with the associated initials (at initial time), boundary (lower-at the solid plane) and free surface (upper-in contact with ambiant air) conditions. This, obviously, is not an easy but a necessary task if we have in mind a rational modelling process, and work within a numerically coherent simulation on a high speed computer.
Download or read book Cracks and Fracture written by K. Bertram Broberg and published by Elsevier. This book was released on 1999-02-24 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cracks and Fracture consists of nine chapters in logical sequence. In two introductory chapters, physical processes in the vicinity of the crack edge are discussed and the fracture process is described. Chapter 3 develops general basic concepts and relations in crack mechanics, such as path independent integrals, stress intensity factors and energy flux into the crack edge region. Chapters 4-7 deal with elastostatic cracks, stationary or slowly moving elastic-plastic cracks, elastodynamic crack mechanics and elastoplastic aspects of fracture, including dynamic fracture mechanics. Appendices include general formulae, the basic theory of analytic functions, introduction to Laplace and Hankel transforms and description of certain basic relations, for instance for stress waves in solids. There is an extensive bibliography, containing references to both classical and recent work, and a comprehensive index. Presents an extensive bibliography containing references to both classical and recent works and a comprehensive index Appendices include general formulas, the basic theory of analytic functions, introduction to Laplace and Hankel transforms, and descriptions of certain basic relations, for instance for stress waves in solids
Download or read book Computational Mechanics written by Zhenhan Yao and published by 清华大学出版社有限公司. This book was released on 2004 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interfacial Phenomena and the Marangoni Effect written by M. G. Velarde and published by Springer. This book was released on 2014-05-04 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marangoni (1878), provided a wealth of detailed information on the effects of variations of the potential energy of liquid surfaces and, in particular, flow arising from variations in temperature and surfactant composition. One aspect of this science is seen today to bear on important phenomena associated with the processing of modern materials. The role of the basic effect in technology was probably first demonstrated by chemical engineers in the field of liquid-liquid extraction. Indeed, phenomena attributable to Marangoni flows have been reported in innumerable instances relevant to modern technologies, such as in hot salt corrosion in aeroturbine blades; the drying of solvent-containing paints; the drying of silicon wafers used in electronics; in materials processing, particularly in metallic systems which have been suspected to demonstrate Marangoni flows.
Download or read book Mathematical Reviews written by and published by . This book was released on 2001 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1988 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The British National Bibliography written by Arthur James Wells and published by . This book was released on 1999 with total page 1778 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Asymptotic Modelling of Fluid Flow Phenomena written by Radyadour Kh. Zeytounian and published by Springer Science & Business Media. This book was released on 2006-04-10 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: for the fluctuations around the means but rather fluctuations, and appearing in the following incompressible system of equations: on any wall; at initial time, and are assumed known. This contribution arose from discussion with J. P. Guiraud on attempts to push forward our last co-signed paper (1986) and the main idea is to put a stochastic structure on fluctuations and to identify the large eddies with a part of the probability space. The Reynolds stresses are derived from a kind of Monte-Carlo process on equations for fluctuations. Those are themselves modelled against a technique, using the Guiraud and Zeytounian (1986). The scheme consists in a set of like equations, considered as random, because they mimic the large eddy fluctuations. The Reynolds stresses are got from stochastic averaging over a family of their solutions. Asymptotics underlies the scheme, but in a rather loose hidden way. We explain this in relation with homogenizati- localization processes (described within the §3. 4 ofChapter 3). Ofcourse the mathematical well posedness of the scheme is not known and the numerics would be formidable! Whether this attempt will inspire researchers in the field of highly complex turbulent flows is not foreseeable and we have hope that the idea will prove useful.
Download or read book Nonlinear Instability of Nonparallel Flows written by S.P. Lin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUTAM Symposium on Nonlinear Instability of Nonparallel Flows was held at Clarkson University, Potsdam, NY 13699-5725, USA from 26 to 31 July 1993. It consisted of 9 general speeches, 35 lectures and 15 poster-seminar presentations. The papers were grouped in fairly focused sessions on boundary layers, shear flows, vortices, wakes, nonlinear waves and jets. The symposium was fol lowed by a workshop in which the subject matter discussed was sum marized and some further work for future investigation was recom mended. The highlights of the workshop will be reported elsewhere. In this book many of the papers that describe the ideas presented at the symposium are collected to provide a reference for researchers in charting the future course of their studies in the area of nonlinear instability of nonparallel flows. The papers in this book are grouped under the following headings: • Boundary layers and shear flows • Compressibility and thermal effects • Vortices and wakes • Nonlinear waves and jets In the lead paper ofthis book M. E. Goldstein describes an asymp totic theory of nonlinear interaction between two spatially growing oblique waves on nonparallel boundary and free-shear layers. The wave interaction originates from the nonlinear critical layer and is responsive to weakly nonparallel effects. The theory results in a sys tem of integral differential equations which appear to be relevant near the upper branch of the neutral curve.
Download or read book Fracture Phenomena in Nature and Technology written by Davide Bigoni and published by Springer Science & Business. This book was released on 2014-04-29 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains contributions presented at the IUTAM Symposium "Fracture Phenomena in Nature and Technology" held in Brescia, Italy, 1-5 July, 2012.The objective of the Symposium was fracture research, interpreted broadly to include new engineering and structural mechanics treatments of damage development and crack growth and also large-scale failure processes as exemplified by earthquake or landslide failures, ice shelf break-up and hydraulic fracturing (natural or for resource extraction or CO2 sequestration), as well as small-scale rupture phenomena in materials physics including, e.g. inception of shear banding, void growth, adhesion and decohesion in contact and friction, crystal dislocation processes and atomic/electronic scale treatment of brittle crack tips and fundamental cohesive properties. Special emphasis was given to multiscale fracture description and new scale-bridging formulations capable to substantiate recent experiments and tailored to become the basis for innovative computational algorithms.
