Download or read book IUTAM Symposium on Multiscale Modeling and Characterization of Elastic Inelastic Behavior of Engineering Materials written by and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book L Art magique written by and published by . This book was released on 1911 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IUTAM Symposium on Multiscale Modeling and Characterization of Elastic Inelastic Behavior of Engineering Materials written by S. Ahzi and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this proceeding are a collection of the works presented at the IUTAM symposium-Marrakech 2002 (October 20-25) which brought together scientists from various countries. These papers cover contemporary topics in multiscale modeling and characterization of materials behavior of engineering materials. They were selected to focus on topics related to deformation and failure in metals, alloys, intermetallics and polymers including: experimental techniques, deformation and failure mechanisms, dislocation-based modelling, microscopic-macroscopic averaging schemes, application to forming processes and to phase transformation, localization and failure phenomena, and computational advances. Key areas that are covered by some of the papers include modeling of material deformation at various scales. At the atomistic scale, results from MD simulations pertaining to deformation mechanisms in nano-crystalline materials as well as dislocation-defect interactions are presented. Advances in modeling of deformation in metals using discrete dislocation analyses are also presented, providing an insight into this emerging scientific technique that can be used to model deformation at the microscale. These papers address current engineering problems, including deformation of thin fIlms, dislocation behavior and strength during nanoindentation, strength in metal matrix composites, dislocation-crack interaction, development of textures in polycrystals, and problems involving twining and shape memory behavior. On Behalf of the organizing committee, I would like to thank Professor P.
Download or read book IUTAM Symposium on Multiscale Modelling of Damage and Fracture Processes in Composite Materials written by Tomasz Sadowski and published by Springer Science & Business Media. This book was released on 2006-07-06 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating macroscopic properties with observations at lower levels, this book details advances in multiscale modelling and analysis pertaining to classes of composites which either have a wider range of relevant microstructural scales, such as metals, or do not have a very well-defined microstructure, e.g. cementitious or ceramic composites. The IUTAM symposia proceedings provide a platform for extensive further discussion and research.
Download or read book IUTAM Symposium on Multiscale Modeling and Characterization of Elastic Inelastic Behavior of Engineering Materials written by S. Ahzi and published by Springer. This book was released on 2014-03-14 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this proceeding are a collection of the works presented at the IUTAM symposium-Marrakech 2002 (October 20-25) which brought together scientists from various countries. These papers cover contemporary topics in multiscale modeling and characterization of materials behavior of engineering materials. They were selected to focus on topics related to deformation and failure in metals, alloys, intermetallics and polymers including: experimental techniques, deformation and failure mechanisms, dislocation-based modelling, microscopic-macroscopic averaging schemes, application to forming processes and to phase transformation, localization and failure phenomena, and computational advances. Key areas that are covered by some of the papers include modeling of material deformation at various scales. At the atomistic scale, results from MD simulations pertaining to deformation mechanisms in nano-crystalline materials as well as dislocation-defect interactions are presented. Advances in modeling of deformation in metals using discrete dislocation analyses are also presented, providing an insight into this emerging scientific technique that can be used to model deformation at the microscale. These papers address current engineering problems, including deformation of thin fIlms, dislocation behavior and strength during nanoindentation, strength in metal matrix composites, dislocation-crack interaction, development of textures in polycrystals, and problems involving twining and shape memory behavior. On Behalf of the organizing committee, I would like to thank Professor P.
Download or read book Multiscale Fatigue Crack Initiation and Propagation of Engineering Materials Structural Integrity and Microstructural Worthiness written by George C. Sih and published by Springer Science & Business Media. This book was released on 2008-06-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: What can be added to the fracture mechanics of metal fatigue that has not already been said since the 1900s? From the view point of the material and structure engineer, there are many aspects of failure by fatigue that are in need of attention, particularly when the size and time of the working components are changed by orders of magnitude from those considered by st traditional means. The 21 century marks an era of technology transition where structures are made larger and devices are made smaller, rendering the method of destructive testing unpractical. While health monitoring entered the field of science and engineering, the practitioners are discovering that the correlation between the signal and the location of interest depends on a priori knowledge of where failure may initiate. This information is not easy to find because the integrity of the physical system will change with time. Required is software that can self-adjust in time according to the monitored data. In this connection, effective application of health monitoring can use a predictive model of fatigue crack growth. Earlier fatigue crack growth models assumed functional dependence on the maximum stress and the size of the pre-existing crack or defect. Various possibilities were examined in the hope that the data could be grouped such that linear interpolation would apply.
Download or read book Soil Stress Strain Behavior Measurement Modeling and Analysis written by Hoe I. Ling and published by Springer Science & Business Media. This book was released on 2007-11-28 with total page 989 pages. Available in PDF, EPUB and Kindle. Book excerpt: The material in this work is focused on recent developments in research into the stress-strain behavior of geomaterials, with an emphasis on laboratory measurements, soil constitutive modeling and behavior of soil structures (such as reinforced soils, piles and slopes). The latest advancements in the field, such as the rate effect and dynamic behavior of both clay and sand, behavior of modified soils and soil mixtures, and soil liquefaction are addressed.
Download or read book Elasticity of Transversely Isotropic Materials written by Haojiang Ding and published by Springer Science & Business Media. This book was released on 2006-07-09 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide a comprehensive introduction to the theory and applications of the mechanics of transversely isotropic elastic materials. There are many reasons why it should be written. First, the theory of transversely isotropic elastic materials is an important branch of applied mathematics and engineering science; but because of the difficulties caused by anisotropy, the mathematical treatments and descriptions of individual problems have been scattered throughout the technical literature. This often hinders further development and applications. Hence, a text that can present the theory and solution methodology uniformly is necessary. Secondly, with the rapid development of modern technologies, the theory of transversely isotropic elasticity has become increasingly important. In addition to the fields with which the theory has traditionally been associated, such as civil engineering and materials engineering, many emerging technologies have demanded the development of transversely isotropic elasticity. Some immediate examples are thin film technology, piezoelectric technology, functionally gradient materials technology and those involving transversely isotropic and layered microstructures, such as multi-layer systems and tribology mechanics of magnetic recording devices. Thus a unified mathematical treatment and presentation of solution methods for a wide range of mechanics models are of primary importance to both technological and economic progress.
Download or read book IUTAM Symposium on Topological Design Optimization of Structures Machines and Materials written by Martin Philip Bendsoe and published by Springer Science & Business Media. This book was released on 2006-10-03 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers edited papers presented at the IUTAM-Symposium Topological design optimization of structures, machines and materials - status and perspectives, October 2005. The papers cover the application of topological design optimization to fluid-solid interaction problems, acoustics problems, and to problems in biomechanics, as well as to other multiphysics problems. Also in focus are new basic modelling paradigms, covering new geometry modelling such as level-set methods and topological derivatives.
Download or read book IUTAM Symposium on Mesoscopic Dynamics of Fracture Process and Materials Strength written by H. Kitagawa and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the IUT AM Symposium of "Mesoscopic Dynamics of Fracture Process and Materials Strength", held in July 2003, at the Hotel Osaka Sun Palace, Osaka, Japan. The Symposium was proposed in 2001, aiming at organizing concentrated discussions on current understanding of fracture process and inhomogeneous deformation governing the materials strength with emphasis on the mesoscopic dynamics associated with evolutional mechanical behaviour under micro/macro mutual interaction. The decision of the General Assembly of International Union of Theoretical and Applied Mechanics (IUT AM) to accept our proposal was well-timed and attracted attention. Driven by the development of new theoretical and computational techniques, various novel challenges to investigate the mesoscopic dynamics have been actively done recently, including large-scaled 3D atomistic simulations, discrete dislocation dynamics and other micro/mesoscopic computational analyses. The Symposium attracted sixty-six participants from eight countries, and forty two papers were presented. The presentations comprised a wide variety of fundamental subjects of physics, mechanical models, computational strategies as well as engineering applications. Among the subjects, discussed are (a) dislocation patterning, (b) crystal plasticity, (c) characteristic fracture of amorphous/nanocrystal, (d) nano-indentation, (e) ductile-brittle transition, (f) ab-initio calculation, (g) computational methodology for multi-scale analysis and others.
Download or read book IUTAM Symposium on One Hundred Years of Boundary Layer Research written by Hans-Joachim Heinemann and published by Springer Science & Business Media. This book was released on 2006-12-20 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects peer-reviewed lectures of the IUTAM Symposium on the 100th anniversary of Boundary Layer research. No other reference of this calibre, on this topic, is likely to be published for the next decade. Covers classification, definition and mathematics of boundary layers; instability of boundary layers and transition; boundary layers control; turbulent boundary layers; numerical treatment and boundary layer modelling; special effects in boundary layers.
Download or read book Embedded Systems Modeling Technology and Applications written by Günter Hommel and published by Springer Science & Business Media. This book was released on 2006-08-05 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book synthesizes the results of the seventh in a successful series of workshops that were established by Shanghai Jiao Tong University and Technische Universität Berlin, bringing together researchers from both universities in order to present research results to an international community. Aspects covered here include, among others, Models and specification; Simulation of different properties; Middleware for distributed real-time systems; Signal Analysis; Control methods; Applications in airborne and medical systems.
Download or read book IUTAM Symposium on Chaotic Dynamics and Control of Systems and Processes in Mechanics written by Giuseppe Rega and published by Springer Science & Business Media. This book was released on 2005-03-10 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest of the applied mechanics community in chaotic dynamics of engineering systems has exploded in the last fifteen years, although research activity on nonlinear dynamical problems in mechanics started well before the end of the Eighties. It developed first within the general context of the classical theory of nonlinear oscillations, or nonlinear vibrations, and of the relevant engineering applications. This was an extremely fertile field in terms of formulation of mechanical and mathematical models, of development of powerful analytical techniques, and of understanding of a number of basic nonlinear phenomena. At about the same time, meaningful theoretical results highlighting new solution methods and new or complex phenomena in the dynamics of deterministic systems were obtained within dynamical systems theory by means of sophisticated geometrical and computational techniques. In recent years, careful experimental studies have been made to establish the actual occurrence and observability of the predicted dynamic phenomena, as it is vitally needed in all engineering fields. Complex dynamics have been shown to characterize the behaviour of a great number of nonlinear mechanical systems, ranging from aerospace engineering applications to naval applications, mechanical engineering, structural engineering, robotics and biomechanics, and other areas. The International Union of Theoretical and Applied Mechanics grasped the importance of such complex phenomena in the Eighties, when the first IUTAM Symposium devoted to the general topic of nonlinear and chaotic dynamics in applied mechanics and engineering was held in Stuttgart (1989).
Download or read book IUTAM Symposium on Evolutionary Methods in Mechanics written by Tadeusz Burczynski and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium held in Cracow, Poland, 24-27 September 2002
Download or read book Thermoelastic Models of Continua written by D. Iesan and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the basic problems of the theory of thermoelasticity for three models of continuous bodies: materials with voids, micropolar solids and nonsimple bodies. Beginning with the basic laws of thermodynamics, the theory of thermoelastic materials with voids is treated. Two subsequent chapters cover the analysis of the linear theory of micropolar thermoelastic bodies. The book concludes with a study of nonsimple thermoelastic materials, which are characterised by the inclusion of higher gradients of displacement in the basic postulates. Relevant examples and exercises which illustrate the theory are given throughout the text. The book should be of interest to mathematicians and specialists working in the fields of elasticity, thermoelasticity, civil engineering and geophysics.
Download or read book Parallel Robots written by J.P. Merlet and published by Springer Science & Business Media. This book was released on 2006-07-01 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel robots are closed-loop mechanisms presenting very good performances in terms of accuracy, velocity, rigidity and ability to manipulate large loads. They have been used in a large number of applications ranging from astronomy to flight simulators and are becoming increasingly popular in the field of machine-tool industry. This book presents a complete synthesis of the latest results on the possible mechanical architectures, analysis and synthesis of this type of mechanism. It is intended to be used by students (with over 150 exercises and numerous internet addresses), researchers (with over 650 references and anonymous ftp access to the code of some algorithms presented in this book) and engineers (for which practical results, mistakes to avoid, and applications are presented). Since the publication of the first edition (2000) there has been an impressive increase in terms of study and use of this kind of structure that are reported in this book. This second edition has been completely overhauled. The initial chapter on kinematics has been split into Inverse Kinematics and Direct Kinematics. A new chapter on calibration was added. The other chapters have also been rewritten to a large extent. The reference section has been updated to include around 45% new works that appeared after the first edition.
Download or read book Thin Walled Composite Beams written by Liviu Librescu and published by Springer Science & Business Media. This book was released on 2006-01-15 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is the first monograph devoted to the foundation of the theory of composite anisotropic thin-walled beams and to its applications in various problems involving the aeronautical/aerospace, helicopter, naval and mechanical structures. Throughout the theoretical part, an effort was made to provide the treatment of the subject by using the equations of the 3-D elasticity theory. Non-classical effects such as transverse shear, warping constraint, anisotropy of constituent materials yielding the coupling of twist-bending (lateral), bending (transversal)-extension have been included and their implications have been thoroughly analyzed. Thermal effects have been included and in order to be able to circumvent their deleterious effects, functionally graded materials have been considered in their construction. Implications of the application of the tailoring technique and of the active feedback control on free vibration, dynamic response, instability and aeroelasticity of such structures have been amply investigated. Special care was exercised throughout this work to address and validate the adopted solution methodologies and the obtained results against those available in the literature and obtained via numerical or experimental means.