Download or read book Iterative Identification and Control Design for Robust Performance written by Wee Sit Lee and published by . This book was released on 1994 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Iterative Identification and Control written by Pedro Albertos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exposition of the interplay between the modelling of dynamic systems and the design of feedback controllers based on these models. The authors of individual chapters are some of the most renowned and authoritative figures in the fields of system identification and control design.
Download or read book Iterative Identification and Control written by P. Albertos Pérez and published by Springer Science & Business Media. This book was released on 2002-05-21 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exposition of the interplay between the modelling of dynamic systems and the design of feedback controllers based on these models. The authors of individual chapters are some of the most renowned and authoritative figures in the fields of system identification and control design.
Download or read book Essays on Control written by H.L. Trentelman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the text of the plenary lectures and the mini-courses of the European Control Conference (ECC'93) held in Groningen, the Netherlands, June 2S-July 1, 1993. However, the book is not your usu al conference proceedings. Instead, the authors took this occasion to take a broad overview of the field of control and discuss its development both from a theoretical as well as from an engineering perpective. The first essay is by the key-note speaker ofthe conference, A.G.J. Mac Farlane. It consists of a non-technical discussion of information processing and knowledge acquisition as the key features of control engineering tech nology. The next six articles are accounts of the plenary addresses. The contribution by R.W. Brockett concerns a mathematical framework for modelling motion control, a central question in robotics and vision. In the paper by M. Morari the engineering and the economic relevance of chemical process control are considered, in particular statistical quality control and the control of systems with constraints. The article by A.C.P.M. Backx is written from an industrial perspec tive. The author is director of an engineering consulting firm involved in the design of industrial control equipment. Specifically, the possibility of obtaining high performance and reliable controllers by modelling, identifi cation, and optimizing industrial processes is discussed.
Download or read book Real time Iterative Learning Control written by Jian-Xin Xu and published by Springer Science & Business Media. This book was released on 2008-12-12 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time Iterative Learning Control demonstrates how the latest advances in iterative learning control (ILC) can be applied to a number of plants widely encountered in practice. The book gives a systematic introduction to real-time ILC design and source of illustrative case studies for ILC problem solving; the fundamental concepts, schematics, configurations and generic guidelines for ILC design and implementation are enhanced by a well-selected group of representative, simple and easy-to-learn example applications. Key issues in ILC design and implementation in linear and nonlinear plants pervading mechatronics and batch processes are addressed, in particular: ILC design in the continuous- and discrete-time domains; design in the frequency and time domains; design with problem-specific performance objectives including robustness and optimality; design in a modular approach by integration with other control techniques; and design by means of classical tools based on Bode plots and state space.
Download or read book Control Oriented H infinity System Identification Based Robust Control Design written by Anju Bahri and published by . This book was released on 1997 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structured Uncertainty Modelling for Robust Control written by G Bor R D Nyi and published by LAP Lambert Academic Publishing. This book was released on 2012-01 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: In safety-critical applications it is expected that stability and performance are guaranteed even if the system dynamics are subjected to disturbances and uncertainties. Mu-synthesis methods are well known, powerful tools of designing robust feedback controllers for complex systems where uncertainties are modelled by structured sets. The book extends the Mu-synthesis framework by addressing the problem from the data-based modelling side. The book tries to characterize the way how to arrive at an efficient description of structured uncertainties and disturbances for complex systems that is not in-validated by experimental data, and is optimized for robust performance. The book leads the reader to the fields of research known as robust control, and iterative identification and control. Based on these disciplines it develops an optimization technique which facilitates both uncertainty modelling and robust feedback control design in order to achieve improved robust performance of the controlled system.
Download or read book From Data to Performance written by Sippe Geert Douma and published by . This book was released on 2006 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Issues in Systems Engineering 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-05-01 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Systems Engineering / 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Systems and Control Engineering. The editors have built Issues in Systems Engineering: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Systems and Control Engineering in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Systems Engineering: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Adaptive Systems in Control and Signal Processing 1995 written by Cs. Banyasz and published by Elsevier. This book was released on 2014-05-23 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading academic and industrial researchers working with adaptive systems and signal processing have been given the opportunity to exchange ideas, concepts and solutions at the IFAC Symposia on Adaptive Systems in Control and Signal Processing. This postprint volume contains all those papers which were presented at the 5th IFAC Symposium in Budapest in 1995. The technical program was composed of a number of invited and contributed sessions and a special case study session, providing a good balance between applications and theory oriented papers.
Download or read book Control System Design for Electrical Stimulation in Upper Limb Rehabilitation written by Chris Freeman and published by Springer. This book was released on 2015-10-28 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive framework for model-based electrical stimulation (ES) controller design, covering the whole process needed to develop a system for helping people with physical impairments perform functional upper limb tasks such as eating, grasping and manipulating objects. The book first demonstrates procedures for modelling and identifying biomechanical models of the response of ES, covering a wide variety of aspects including mechanical support structures, kinematics, electrode placement, tasks, and sensor locations. It then goes on to demonstrate how complex functional activities of daily living can be captured in the form of optimisation problems, and extends ES control design to address this case. It then lays out a design methodology, stability conditions, and robust performance criteria that enable control schemes to be developed systematically and transparently, ensuring that they can operate effectively in the presence of realistic modelling uncertainty, physiological variation and measurement noise.
Download or read book System Identification 2003 written by Paul Van Den Hof and published by Elsevier. This book was released on 2004-06-29 with total page 2092 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of the symposium covers all major aspects of system identification, experimental modelling, signal processing and adaptive control, ranging from theoretical, methodological and scientific developments to a large variety of (engineering) application areas. It is the intention of the organizers to promote SYSID 2003 as a meeting place where scientists and engineers from several research communities can meet to discuss issues related to these areas. Relevant topics for the symposium program include: Identification of linear and multivariable systems, identification of nonlinear systems, including neural networks, identification of hybrid and distributed systems, Identification for control, experimental modelling in process control, vibration and modal analysis, model validation, monitoring and fault detection, signal processing and communication, parameter estimation and inverse modelling, statistical analysis and uncertainty bounding, adaptive control and data-based controller tuning, learning, data mining and Bayesian approaches, sequential Monte Carlo methods, including particle filtering, applications in process control systems, motion control systems, robotics, aerospace systems, bioengineering and medical systems, physical measurement systems, automotive systems, econometrics, transportation and communication systems *Provides the latest research on System Identification*Contains contributions written by experts in the field*Part of the IFAC Proceedings Series which provides a comprehensive overview of the major topics in control engineering.
Download or read book Iterative Learning Control written by Zeungnam Bien and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Iterative Learning Control (ILC) differs from most existing control methods in the sense that, it exploits every possibility to incorporate past control informa tion, such as tracking errors and control input signals, into the construction of the present control action. There are two phases in Iterative Learning Control: first the long term memory components are used to store past control infor mation, then the stored control information is fused in a certain manner so as to ensure that the system meets control specifications such as convergence, robustness, etc. It is worth pointing out that, those control specifications may not be easily satisfied by other control methods as they require more prior knowledge of the process in the stage of the controller design. ILC requires much less information of the system variations to yield the desired dynamic be haviors. Due to its simplicity and effectiveness, ILC has received considerable attention and applications in many areas for the past one and half decades. Most contributions have been focused on developing new ILC algorithms with property analysis. Since 1992, the research in ILC has progressed by leaps and bounds. On one hand, substantial work has been conducted and reported in the core area of developing and analyzing new ILC algorithms. On the other hand, researchers have realized that integration of ILC with other control techniques may give rise to better controllers that exhibit desired performance which is impossible by any individual approach.
Download or read book European Control Conference 1995 written by and published by European Control Association. This book was released on 1995-09-05 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the European Control Conference 1995, Rome, Italy 5-8 September 1995
Download or read book System Identification and Robust Control written by Steen Toffner-Clausen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology impacts all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies, ... , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. The present text Steen T0ffner-Clausen deals with both system identification and robust control. It provides a very comprehensive tutorial introduction to some of the most difficult topics in robust control theory before considering applications problems. Traditional Hoo robust control design concepts for multivariable systems are first considered and the problems of robust stability and performance are discussed. The following chapter introduces the idea of the structured singular value and applies this to both analysis and synthesis problems. The author manages to provide a very straightforward introduction to this subject and also introduces some new ideas.
Download or read book European Control Conference 1993 written by and published by European Control Association. This book was released on 1993-06-28 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the European Control Conference 1993, Groningen, Netherlands, June 28 – July 1, 1993
Download or read book Fifth International Symposium on Magnetic Suspension Technology written by Nelson J. Groom and published by . This book was released on 2000 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the state of technology of all areas of magnetic suspension and reviews recent developments in sensors, controls, superconducting magnet technology, and design/implementation practices.
