Download or read book Guide for the Use of the International System of Units SI written by Barry Taylor and published by DIANE Publishing. This book was released on 1995-11 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: A basic introduction to the metric system. Covers: the three classes of SI units & the SI prefixes; units outside the SI; rules & style conventions for printing & using units; rules & style conventions for expressing values of quantities; comments on some quantities & their units; rules & style conventions for spelling unit names; printing & using symbols & numbers in scientific & technical documents; & check list for reviewing manuscripts. Appendix: definitions of SI base units & the radian & Steradian; conversion factors, & comments on the references of the SI for the U.S. Extensive bibliography.
Download or read book Encyclopaedia of Scientific Units Weights and Measures written by François Cardarelli and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 869 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mankind has a fascination with measurement. Down the centuries we have produced a plethora of incompatible and duplicatory systems for measuring everything from the width of an Egyptian pyramid to the concentration of radioactivity near a nuclear reactor and the value of the fine structure constant. With the introduction first of the metric system and of its successor the Système International d'Unités (SI), the scientific community has established a standard method of measurement based on only seven core units. The Encyclopaedia of Scientific Units, Weights and Measures converts the huge variety of units from all over the world in every period of recorded history into units of the SI. Featuring: - An A - Z of conversion tables for over 10,000 units of measurements. - Tables of the fundamental constants of nature with their units. - Listings of professional societies, and national standardization bodies for easy reference. - An extensive bibliography detailing further reading on the multifarious aspects of measurement and its units. This huge work is simply a "must have" for any reference library frequented by scientists of any discipline or by those with historical interests in units of measurement such as archaeologists.
Download or read book International Standardization written by United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Science, Research, and Technology and published by . This book was released on 1989 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific Unit Conversion written by Francois Cardarelli and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published in a pocket book format for ease of use, this is a truly unique and practical guide giving accurate metric equivalents and conversion factors for no fewer than 10,000 scientific units. Cardarelli has spent many years building up this complete range of US, British, conventional metric, historic systems and SI units, covering the worlds of science, technology and medicine. The charts and tables are readily referenced and coloured tabs denote the different sections while a slot-in user guide acts as a bookmark.
Download or read book Guide for the Use of the International System of Units SI rev written by Ambler Thompson and published by DIANE Publishing. This book was released on 2009-11 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to assist users of the metric system (Internat. System of Units; SI), to inform them of changes in the SI and in SI usage. Contents: (1) Intro.; (2) NIST Policy on the Use of the SI; (3) Other Sources of Info. on the SI; (4) The Two Classes of SI Units and the SI Prefixes; (5) Units Outside the SI; (6) Rules and Style Conventions for Printing and Using Units; (7) Rules and Style Conventions for Expressing Values of Quantities; (8) Comments on Some Quantities and Their Units; (9) Rules and Style Conventions for Spelling Unit Names; (10) More on Printing and Using Symbols and Numbers in Scientific and Technical Documents; Appendix A: Definitions of the SI Base Units; Appendix B: Conversion Factors. Illustrations.
Download or read book Quantities Units and Symbols in Physical Chemistry written by E Richard Cohen and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first IUPAC Manual of Symbols and Terminology for Physicochemical Quantities and Units (the Green Book) of which this is the direct successor, was published in 1969, with the object of 'securing clarity and precision, and wider agreement in the use of symbols, by chemists in different countries, among physicists, chemists and engineers, and by editors of scientific journals'. Subsequent revisions have taken account of many developments in the field, culminating in the major extension and revision represented by the 1988 edition under the simplified title Quantities, Units and Symbols in Physical Chemistry. This 2007, Third Edition, is a further revision of the material which reflects the experience of the contributors with the previous editions. The book has been systematically brought up to date and new sections have been added. It strives to improve the exchange of scientific information among the readers in different disciplines and across different nations. In a rapidly expanding volume of scientific literature where each discipline has a tendency to retreat into its own jargon this book attempts to provide a readable compilation of widely used terms and symbols from many sources together with brief understandable definitions. This is the definitive guide for scientists and organizations working across a multitude of disciplines requiring internationally approved nomenclature.
Download or read book Conversion Tables of Units in Science Engineering written by Ari L Horvath and published by Springer. This book was released on 1986-10-13 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Converting units from one type of usage to another is a constant and regular problem that engineers and scientists have to solve. This book will therefore be invaluable as it provides a complete coverage of all the conversion factors required. Covering areas such as mechanical units, thermal units, units of physical chemistry, units of light, units of electricity and magnetism and also radiation. References are given throughout and there is a comprehensive index.
Download or read book Industrial Ventilation Design Guidebook Volume 1 written by Howard D. Goodfellow and published by Academic Press. This book was released on 2020-07-24 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fully revised and restructured two-volume 2nd edition of the Industrial Ventilation Design Guidebook develops a systematic approach to the engineering design of industrial ventilation systems and provides engineers guidance on how to implement this state-of-the-art ventilation technology on a global basis.Volume 1: Fundamentals features the latest research technology in the broad field of ventilation for contaminant control including extensive updates of the foundational chapters from the previous edition.With major contributions by experts from Asia, Europe and North America in the global industrial ventilation field, this new edition is a valuable reference for consulting engineers working in the design of air pollution and sustainability for their industrial clients (processing and manufacturing), as well as mechanical, process and plant engineers looking for design methodologies and advice on sensors and control algorithms for specific industrial operations so they can meet challenging targets in the low carbon economy. Presents practical designs for different types of industrial systems including descriptions and new designs for ducted systems Discusses the basic processes of air and containment movements such as jets, plumes, and boundary flows inside ventilated spaces Introduces the new concept of target levels in the systematic design methodology such as assessing target levels for key parameters of industrial air technology and the hierarchy of different target levels Provides future directions and opportunities in the industrial design field
Download or read book PVC Technology written by M.V. Titow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book continues the tradition of the first two editions of the late W. S. Penn's original PVC Technology, and the extensively revised third (1971) edition prepared by myself and B. J. Lanham. In the present edition the original general format, and the arrange ment of chapters, have been largely preserved, but virtually nothing now remains of Penn's own text: a part of the contents is based on material from the 1971 TitowlLanham version (revised, updated and mainly rewritten): the rest is new, including, inter alia, several chapters specially contributed by experts from the plastics industry in the UK and Europe. The section listing international (ISO) and national (BS, ASTM and DIN) standards relevant to PVC, which was first intro duced (as Appendix 1) in the 1971 edition, proved a popularfeature: it has now been brought up to date and considerably extended. Two further appendices provide, respectively, comprehensive unit conver sion"tables (with additional information on some ofthe mostfrequently encountered units, and the SI units), and a list of many properties of interest in PVC materials, with definitions, typical numerical values, and references~to relevant standard test methods. For various reasons, work on this edition involved more than the usual quota of problems: I am truly grateful to the Publisher's Manag ing Editor, Mr G. B. Olley, for his understanding, patience, unfailing courtesy and friendly encouragement.
Download or read book Standardizing Terminology for Better Communication written by Richard Alan Strehlow and published by ASTM International. This book was released on 1993 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty-seven papers from the ASTM symposium on [title] held in Cleveland, Ohio, June 1991, provide an overview of terminology work today. The volume is arranged into four major categories: issues in terminology; applying terminological principles and theories; computerization and database applicatio
Download or read book Mathematical Expressions written by Jukka K. Korpela and published by Suomen E-painos Oy. This book was released on 2014-08-12 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide to writing mathematical expressions covers both simple notations used in general texts and professional formulas and equations used in natural sciences, mathematics, and other fields. It is an essential handbook for people who write, edit, or typeset of texts where mathematical notations may be needed. The book presents notations defined in the modern international standard ISO 80000-2 but also describes other common practices.
Download or read book ISO Standards for Geographic Information written by Wolfgang Kresse and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book addresses scientists and technical experts who have already some background knowledge in Geographic Information Systems (GIS) and who want to know more about standardisation in GIS, in particular, the role of the International Organization for Standardization (ISO). In addition, the monograph meets the needs of programmers who are involved in implementing ISO 19100 standards and who need a better understanding of the overall structure of the standards. Last, but not least, this richly illustrated book helps readers to better understand the rather abstract ISO documents.
Download or read book Standard Methods for Thermal Comfort Assessment of Clothing written by Ivana Špelić and published by CRC Press. This book was released on 2019-06-20 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing detailed analysis of the thermal comfort assessment of clothing as the basis for developing standards, this book discusses the thermal protective role of clothing as a way of modelling heat transfer from the body, general thermal regulation of humans, and the importance of globally accepted test methods and standards to improve quality. New materials and discoveries in the study of thermal comfort necessitate the need for standard improvements and update. The development of international standards and the unification of testing methods is of crucial significance to ensure cost reduction and health protection. The book promotes instruments, methods, implementation of unified specifications, and the definition of standards so that a clear quality management system can be established, for both production systems and testing methods. It discusses standards in ergonomics of the thermal environment, clothing thermal characteristics, and subjective assessment of thermal comfort, which allows for systematic control of the measuring methods and the services and final products that are distributed on the global market. This book is aimed at industry professionals, researchers, and advanced students working in textile and clothing engineering, comfort testing, and ergonomics.
Download or read book Compendium of Terminology and Nomenclature of Properties in Clinical Laboratory Sciences written by Georges Férard and published by Royal Society of Chemistry. This book was released on 2016-11-11 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been significant expansion and development in clinical laboratory sciences and, in particular, metrological concepts, definitions and terms since the previous edition of this book was published in 1995. It is of prime importance to standardize laboratory reports for reliable exchange of patient examination data without loss of meaning or accuracy. New disciplines have appeared and the interrelationships between different disciplines within clinical laboratory sciences demand a common structure and language for data exchange, in the laboratory and with the clinicians, necessitating additional coverage in this book. These new sections will be based upon recommendations published by various national, regional, and international bodies especially IUPAC and IFCC. This book groups and updates the recommendations and will be appropriate for laboratory scientists, medical professionals and students in this area.
Download or read book Security First Compliance for Small Businesses written by Karen Walsh and published by CRC Press. This book was released on 2023-08-17 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organizations of all sizes struggle to secure their data in a constantly evolving digital landscape. Expanding digital footprints and the rapid expansion of cloud strategies arising from the COVID-19 pandemic increase an organization’s attack surface. When combined with limited resources caused by the cybersecurity skills gap, securing small and mid-sized business IT infrastructures becomes more complicated. With limited staffing and budgetary restrictions, small businesses need to create cost-effective, security-driven programs that protect data while also meeting increasingly stringent compliance requirements. This book bridges the gap between complex technical language and business objectives to create a security-first review of the security and compliance landscapes. Starting from the premise that “with security comes compliance,” this book starts by defining “security-first” and then walking readers through the process of creating a holistic security and compliance program. Looking at security and privacy through the lens of zero trust, this overview of regulations and industry standards provides both background about and implications drawn from modern security practices. Rather than focusing solely on individual cybersecurity frameworks, this book offers insights into best practices based on the commonalities between regulations and industry standards, highlighting some of the primary differences to show the nuances. Woven throughout are practical examples of solutions that enable small and mid-sized businesses to create “cybersustainable” security-focused policies, processes, and controls that protect today’s future for tomorrow’s digital ecosystem.
Download or read book Springer Handbook of Geographic Information written by Wolfgang Kresse and published by Springer Science & Business Media. This book was released on 2011-10-31 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer science provides a powerful tool that was virtually unknown three generations ago. Some of the classical fields of knowledge are geodesy (surveying), cartography, and geography. Electronics have revolutionized geodetic methods. Cartography has faced the dominance of the computer that results in simplified cartographic products. All three fields make use of basic components such as the Internet and databases. The Springer Handbook of Geographic Information is organized in three parts, Basics, Geographic Information and Applications. Some parts of the basics belong to the larger field of computer science. However, the reader gets a comprehensive view on geographic information because the topics selected from computer science have a close relation to geographic information. The Springer Handbook of Geographic Information is written for scientists at universities and industry as well as advanced and PhD students.
Download or read book Principles of Object Oriented Modeling and Simulation with Modelica 3 3 written by Peter Fritzson and published by John Wiley & Sons. This book was released on 2015-01-06 with total page 1268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fritzson covers the Modelica language in impressive depth from the basic concepts such as cyber-physical, equation-base, object-oriented, system, model, and simulation, while also incorporating over a hundred exercises and their solutions for a tutorial, easy-to-read experience. The only book with complete Modelica 3.3 coverage Over one hundred exercises and solutions Examines basic concepts such as cyber-physical, equation-based, object-oriented, system, model, and simulation
