Download or read book ISO 2631 1 written by and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Standard ISO 2631 1 written by International Organization for Standarization and published by . This book was released on 1997 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Vibration and Shock Evaluation of Human Exposure to Whole body Vibration Part 1 General Requirements ISO 2631 1 written by Międzynarodowa Organizacja Normalizacyjna and published by . This book was released on 1997 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Aerospace Medicine written by Jeffrey R. Davis, M.D. and published by Lippincott Williams & Wilkins. This book was released on 2008 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its Fourth Edition with a new editorial team, this comprehensive text addresses all medical and public health issues involved in the care of crews, passengers, and support personnel of aircraft and space vehicles. Coverage includes human physiology under flight conditions, clinical medicine in the aerospace environment, and the impact of the aviation industry on global public health. This edition features new chapters on radiation, toxicology and microbiology, dental considerations in aerospace medicine, women's health issues, commercial human space flight, space exploration, and unique aircraft including parachuting. Other highlights include significant new information on respiratory diseases, cardiovascular medicine, infectious disease transmission, and human response to acceleration.
Download or read book Evaluation of Human Exposure to Whole body Vibration part 1 General Requirements written by American National Standards Institute and published by . This book was released on 1985 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ISO 2631 4 written by and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Railway Noise and Vibration written by David Thompson and published by Elsevier. This book was released on 2008-12-11 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Railways are an environmentally friendly means of transport well suited to modern society. However, noise and vibration are key obstacles to further development of the railway networks for high-speed intercity traffic, for freight and for suburban metros and light-rail. All too often noise problems are dealt with inefficiently due to lack of understanding of the problem. This book brings together coverage of the theory of railway noise and vibration with practical applications of noise control technology at source to solve noise and vibration problems from railways. Each source of noise and vibration is described in a systematic way: rolling noise, curve squeal, bridge noise, aerodynamic noise, ground vibration and ground-borne noise, and vehicle interior noise. - Theoretical modelling approaches are introduced for each source in a tutorial fashion - Practical applications of noise control technology are presented using the theoretical models - Extensive examples of application to noise reduction techniques are included Railway Noise and Vibration is a hard-working reference and will be invaluable to all who have to deal with noise and vibration from railways, whether working in the industry or in consultancy or academic research. David Thompson is Professor of Railway Noise and Vibration at the Institute of Sound and Vibration Research, University of Southampton. He has worked in the field of railway noise since 1980, with British Rail Research in Derby, UK, and TNO Institute of Applied Physics in the Netherlands before moving to Southampton in 1996. He was responsible for developing the TWINS software for predicting rolling noise. - Discusses fully the theoretical background and practical workings of railway noise - Includes the latest research findings, brought together in one place - Forms an extended case study in the application of noise control techniques
Download or read book ISO 2631 2 written by and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Validation and Improvement of the ISO 2631 1 1997 Standard Method for Evaluating Discomfort from Whole body Vibration in a Multi axis Environment written by Yka Marjanen and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration exposure can occur at work, commuting between home and work, and in leisure activities. Any form of transportation will expose humans to some degree of vibration. Exposure to vibration can cause health problems, but more likely comfort problems. Health problems are normally related to back pain. Comfort on the other hand is related to both physiological and psychological factors, which can have a wide range of effects from a general annoyance to a reduced work capability. The standard ISO 2631-1 (1997) provides a guidance, which can be used to measure, evaluate and assess effects of whole-body vibration to discomfort. The standard allows several interpretations, which can lead to different results, as the standard does not provide an explicit guidance for selecting which axes and locations to measure and which averaging method to use for evaluating the axes. The suggested averaging method is the root mean square (r.m.s.) method, but additionally vibration dose value (VDV) can be used. This can lead to different results, as VDV emphasises shocks more than the r.m.s. method. The standard guides to measure and evaluate at least the seat translational axes, but the additional nine axes from the seat, backrest and floor are not mandatory. However, this can result in a different comfort value, as the values from the measured axes are combined. So taking into account all possible interpretations the assessment can vary significantly for the same environment. The selection of the averaging method is not a technical issue, as both methods are supported by all commercial equipment. However, it is rare that more than three axes are possible to be measured with typical whole-body vibration measurement equipment, thus the majority of studies have published results based on only the seat translational axes. Especially the rotational axes have been missing in most studies. The full method (i.e. using all possible axes to calculate the comfort value) of ISO 2631-1 (1997) has been rarely used and there is very little information on how accurate the method is for assessing discomfort in a multi-axis environment. There are only a few studies that have used the full method, but there are no known studies which have actually validated the full ISO 2631-1 method. The objective of the thesis was to validate and, if necessary, to improve the full method of the ISO 2631-1 standard for evaluating discomfort from whole-body vibration in a multi-axis environment. It was assumed that the ISO 2631-1 method can be used to predict discomfort in practice, but there are a relatively low number of studies to confirm this. Frequency weightings have been the focus of many published studies and it was assumed that these are broadly correct. Other aspects of the ISO 2631-1 method are the focus of this thesis. The goal was to keep a backward compatibility to previous studies and the current commercial equipment, thus several limitations were defined for the improvement of the standard. Several laboratory experiments, field measurements, and field and laboratory trials were conducted to validate the standard method. At first it was concluded that practical equipment for measuring 12-axis data was needed as there was no commercial system available. The equipment and software was validated in two experiments, which showed that simple and affordable components could be used to develop equipment for the full method. Even though the standard does not include information about a six-axis sensor for measuring both translational and rotational axes, there was a method to validate the sensor. The first field study included measuring several machines using all twelve axes. The analysis showed that the seat and backrest translational axes will contribute about 90 % of the overall vibration total value of the standard method, thus very little justification was found for including the seat rotational and floor translational axes. Similar results were found based on the data from the previous 12-axis studies. It was also found that the neglected axes could be compensated with a factor for estimating the overall vibration total value including all twelve axes. As the overall vibration total value is directly related to the number of used axes, the compensating factors can be used to compare results which used different axes. The laboratory trial confirmed the results from the field study, and it was concluded that sufficient accuracy to predict discomfort can be achieved using just the seat translational axes, even though the correlation improved when more axes were included. It was found that the evaluation of discomfort was improved by the use of the frequency weighting curves and the r.m.s. averaging method. However, as the multiplying factors degraded correlation, it was concluded that a new set of factors should be calculated. The new factors showed that a higher emphasis on the seat horizontal axes should be given (x=2.7, y=1.8 and z=1.0). The new factors improved the correlation systematically for all subjects. The field trial showed a similar trend, where optimised multiplying factors improved the correlation, but it was also noted that different multiplying factors are required for different environments, thus a procedure to optimise the standard method to different environments was developed. The trial showed systematic behaviour and the optimised multiplying factors were best for all subjects and groups.
Download or read book Handbook of Human Vibration written by M. J. Griffin and published by Academic Press. This book was released on 2012-12-02 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today the human body is exposed to vibration not only while traveling but also during leisure and domestic activities and in many occupations. This volume summarizes the current understanding of the many human responses to vibration.Divided into two parts, this book deals with whole-body vibrations and hand-transmitted vibration. In each part the experimental data and appropriate models are presented in detail so that readers can address practical problems. An extensive guide to national and international standards is provided, and a large multidisciplinary glossary of terms assists in understanding the relevant technical and medical jargon.This comprehensive reference volume is accessible to all those interested in human vibration: medical doctors, engineers, lawyers, scientists, and health and safety officials and administrators.LK uses the following bulleted list_This new text features:An up-to-date statement of current knowledge on human responses to vibrationA comprehensive glossary of terms in current use in the fields of vibration and human responseAn extensive bibliography and guide to national and international standards
Download or read book Fundamentals of Aerospace Medicine written by Jeffrey Davis and published by Lippincott Williams & Wilkins. This book was released on 2021-04-14 with total page 1262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encompassing all occupants of aircraft and spacecraft—passengers and crew, military and civilian—Fundamentals of Aerospace Medicine, 5th Edition, addresses all medical and public health issues involved in this unique medical specialty. Comprehensive coverage includes everything from human physiology under flight conditions to the impact of the aviation industry on public health, from an increasingly mobile global populace to numerous clinical specialty considerations, including a variety of common diseases and risks emanating from the aerospace environment. This text is an invaluable reference for all students and practitioners who engage in aeromedical clinical practice, engineering, education, research, mission planning, population health, and operational support.
Download or read book Environmental Vibrations Prediction Monitoring Mitigation and Evaluation written by Hirokazu Takemiya and published by CRC Press. This book was released on 2021-06-23 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Globally there is much interest in environmental vibrations, as caused by all forms of traffic, by construction activities and factory operations, and by other man-made sources. The focus is on prediction, control and mitigation to benefit our quality of life, and also to improve the operation of sensitive machines in high-tech production. The Japanese Geotechnical Society, the Architectural Institute of Japan, the Japanese Society of Civil Engineering and the Chinese Society for Vibration Engineering came together to organise this International Symposium on Environmental Vibrations at Okayama University, from September 20th to September 22nd, 2005. This book contains the proceedings of this meeting, recording the international exchange of experience, knowledge and research presented at the conference. Both invited and submitted papers are included, written by eminent academic professionals and engineering specialists. It includes topical areas of environmental vibrations, as well as referring to expertise and practices in related fields, these include: wave propagation in soils; soil dynamics; soil-structure dynamic interaction; field measurement of environmental vibration; monitoring of environmental vibrations; development of vibration mitigation measures; evaluation of environmental vibrations; effects of vibration on human perception; effects of vibration on high-precision machines. Both the research community and professionals in the field of environmental vibrations will find this an excellent resource.
Download or read book Manual of Vibration Exercise and Vibration Therapy written by Jörn Rittweger and published by Springer Nature. This book was released on 2020-05-23 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the practical aspects of vibration exercise and vibration therapy. In addition, it describes the technical and physiological background, providing applied scientists and doctors with a deeper understanding of the therapeutic potential that vibration exercise holds. Having first emerged two decades ago, vibration exercise has since established itself as a widespread form of physical exercise, used in all rehabilitation areas. The goal of this book is to close the gap between scientific knowledge and practice. Given that occupational exposure to vibration leads to well-known unfavorable effects, the book is also dedicated to potential risks, hazards and contra-indications and of course, the application of vibration therapy in a number of specific conditions is presented in a clinically usable fashion. Given its breadth of coverage, this book will be of interest to physiotherapists and exercise scientists, but also to a wider range of physicians working in the field of rehabilitation.
Download or read book Advances and Trends in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2010-08-16 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances and Trends in Structural Engineering, Mechanics and Computation features over 300 papers classified into 21 sections, which were presented at the Fourth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2010, Cape Town, South Africa, 6-8 September 2010). The SEMC conferences have been held every 3 years in
Download or read book DS ISO 2631 1 written by Dansk Standard and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Problems in Structures written by Hugo Bachmann and published by Birkhäuser. This book was released on 2012-12-06 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authors: Hugo Bachmann, Walter J. Ammann, Florian Deischl, Josef Eisenmann, Ingomar Floegl, Gerhard H. Hirsch, Günter K. Klein, Göran J. Lande, Oskar Mahrenholtz, Hans G. Natke, Hans Nussbaumer, Anthony J. Pretlove, Johann H. Rainer, Ernst-Ulrich Saemann, Lorenz Steinbeisser. Large structures such as factories, gymnasia, concert halls, bridges, towers, masts and chimneys can be detrimentally affected by vibrations. These vibrations can cause either serviceability problems, severely hampering the user's comfort, or safety problems. The aim of this book is to provide structural and civil engineers working in construction and environmental engineering with practical guidelines for counteracting vibration problems. Dynamic actions are considered from the following sources of vibration: - human body motions, - rotating, oscillating and impacting machines, - wind flow, - road traffic, railway traffic and construction work. The main section of the book presents tools that aid in decision-making and in deriving simple solutions to cases of frequently occurring "normal" vibration problems. Complexer problems and more advanced solutions are also considered. In all cases these guidelines should enable the engineer to decide on appropriate solutions expeditiously. The appendices of the book contain fundamentals essential to the main chapters.
Download or read book Theory of Ground Vehicles written by J. Y. Wong and published by John Wiley & Sons. This book was released on 2008-08-04 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology/Engineering/Automotive Engineering for advancing ground vehicle mobility A standard text and reference for both the educational and professional communities, Theory of Ground Vehicles gives aspiring and practicing engineers a fundamental understanding of the critical factors affecting the performance, handling, and ride essential to the development and design of ground vehicles. In view of the growing concerns over environmental impact, energy efficiency, and safety, this new Fourth Edition has been revised and expanded to address these issues and other developments in the field. Retaining the contents and format of previous editions, the Fourth Edition introduces new material to reflect recent advances in ground transportation technology, including: * Computer-aided methods for design and performance evaluation of off-road vehicles and their practical applications * Emissions and fuel economy * Hybrid electric drives and fuel cells and their operating principles * Selection of vehicle configurations for off-road operations * Road vehicle stability control * ISO 2631-1:1997 and its applications to evaluating vehicle ride characteristics As in previous editions, this book focuses on applying engineering principles to the analysis of vehicle behavior. A large number of practical examples and problems are included throughout to help readers bridge the gap between theory and practice. With its broad coverage and pedagogical aids, Theory of Ground Vehicles, Fourth Edition remains the text of choice for students, engineers, and researchers wishing to master and apply basic theory to solve real-world, road and off-road vehicle mobility problems.
