Download or read book ISO 10110 Optics and Optical Instruments written by Ronald K. Kimmel and published by . This book was released on 2002 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Induced Damage of Optical Materials written by Roger M. Wood and published by CRC Press. This book was released on 2003-08-01 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The laser power handling capacities of optical systems are determined by the physical properties of their component materials. At low intensity levels these factors are not important, but an understanding of damage mechanisms is fundamental to good design of laser products operating at high power. Laser Induced Damage of Optical Materials presents
Download or read book Handbook of Optomechanical Engineering written by Anees Ahmad and published by CRC Press. This book was released on 2017-07-11 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook covers all major aspects of optomechanical engineering - from conceptual design to fabrication and integration of complex optical systems. The practical information within is ideal for optical and optomechanical engineers and scientists involved in the design, development and integration of modern optical systems for commercial, space, and military applications. Charts, tables, figures, and photos augment this already impressive text. Fully revised, the new edition includes 4 new chapters: Plastic optics, Optomechanical tolerancing and error budgets, Analysis and design of flexures, and Optomechanical constraint equations.
Download or read book ISO Catalogue written by International Organization for Standardization and published by . This book was released on 2007 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Optomechanics written by Daniel Vukobratovich and published by CRC Press. This book was released on 2018-01-29 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: When Galileo designed the tube of his first telescope, optomechanics was born. Concerned with the shape and position of surfaces in an optical system, optomechanics is a subfield of physics that is arguably as old as optics. However, while universities offer courses on the subject, there is a scarcity in textbook selections that skillfully and properly convey optomechanical fundamentals to aspiring engineers. Complemented by tutorial examples and exercises, this textbook rectifies this issue by providing instructors and departments with a better choice for transmitting to students the basic principles of optomechanics and allowing them to comfortably gain familiarity with the field’s content. Practicing optical engineers who engage in self-study and wish to enhance the extent of their knowledge will also find benefit from the vast experience of the authors. The book begins with a discussion of materials based on optomechanical figures of merit and features chapters on windows, prisms, and lenses. The authors also cover topics related to design parameter, mounting small mirrors, metal mirrors with a discussion of infrared applications, and kinematic design. Overall, Fundamentals of Optomechanics outfits students and practitioners with a stellar foundation for exploring the design and support of optical system surfaces under a wide variety of conditions. Provides the fundamentals of optomechanics Presents self-contained, student-friendly prose, written by top scientists in the field Discusses materials, windows, individual lenses and multiple lenses Includes design, mounting, and performance of mirrors Includes homework problems and a solutions manual for adopting professors
Download or read book Optical Engineering Science written by Stephen Rolt and published by John Wiley & Sons. This book was released on 2020-01-07 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide for engineers and students that covers a wide range of optical design and optical metrology topics Optical Engineering Science offers a comprehensive and authoritative review of the science of optical engineering. The book bridges the gap between the basic theoretical principles of classical optics and the practical application of optics in the commercial world. Written by a noted expert in the field, the book examines a range of practical topics that are related to optical design, optical metrology and manufacturing. The book fills a void in the literature by coving all three topics in a single volume. Optical engineering science is at the foundation of the design of commercial optical systems, such as mobile phone cameras and digital cameras as well as highly sophisticated instruments for commercial and research applications. It spans the design, manufacture and testing of space or aerospace instrumentation to the optical sensor technology for environmental monitoring. Optics engineering science has a wide variety of applications, both commercial and research. This important book: Offers a comprehensive review of the topic of optical engineering Covers topics such as optical fibers, waveguides, aspheric surfaces, Zernike polynomials, polarisation, birefringence and more Targets engineering professionals and students Filled with illustrative examples and mathematical equations Written for professional practitioners, optical engineers, optical designers, optical systems engineers and students, Optical Engineering Science offers an authoritative guide that covers the broad range of optical design and optical metrology topics and their applications.
Download or read book Handbook of Humidity Measurement Volume 2 written by Ghenadii Korotcenkov and published by CRC Press. This book was released on 2019-01-25 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of unique water properties, humidity affects many living organisms, including humans and materials. Humidity control is important in various fields, from production management to creating a comfortable living environment. The second volume of The Handbook of Humidity Measurement is entirely devoted to the consideration of different types of solid-state devices developed for humidity measurement. This volume discusses the advantages and disadvantages about the capacitive, resistive, gravimetric, hygrometric, field ionization, microwave, Schottky barrier, Kelvin probe, field-effect transistor, solid-state electrochemical, and thermal conductivity-based humidity sensors. Additional features include: Provides a comprehensive analysis of the properties of humidity-sensitive materials, used for the development of such devices. Describes numerous strategies for the fabrication and characterization of humidity sensitive materials and sensing structures used in sensor applications. Explores new approaches proposed for the development of humidity sensors. Considers conventional devices such as phsychometers, gravimetric, mechanical (hair), electrolytic, child mirror hygrometers, etc., which were used for the measurement of humidity for several centuries. Handbook of Humidity Measurement, Volume 2: Electronic and Electrical Humidity Sensors provides valuable information for practicing engineers, measurement experts, laboratory technicians, project managers in industries and national laboratories, as well as university students and professors interested in solutions to humidity measurement tasks as well as in understanding fundamentals of any gas sensor operation and development.
Download or read book BSI Standards Catalogue written by and published by . This book was released on 1997 with total page 1110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Opto Mechanical Systems Design Volume 1 written by Paul Yoder and published by CRC Press. This book was released on 2017-12-19 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: Opto-Mechanical Systems Design, Fourth Edition is different in many ways from its three earlier editions: coauthor Daniel Vukobratovich has brought his broad expertise in materials, opto-mechanical design, analysis of optical instruments, large mirrors, and structures to bear throughout the book; Jan Nijenhuis has contributed a comprehensive new chapter on kinematics and applications of flexures; and several other experts in special aspects of opto-mechanics have contributed portions of other chapters. An expanded feature—a total of 110 worked-out design examples—has been added to several chapters to show how the theory, equations, and analytical methods can be applied by the reader. Finally, the extended text, new illustrations, new tables of data, and new references have warranted publication of this work in the form of two separate but closely entwined volumes. This first volume, Design and Analysis of Opto-Mechanical Assemblies, addresses topics pertaining primarily to optics smaller than 50 cm aperture. It summarizes the opto-mechanical design process, considers pertinent environmental influences, lists and updates key parameters for materials, illustrates numerous ways for mounting individual and multiple lenses, shows typical ways to design and mount windows and similar components, details designs for many types of prisms and techniques for mounting them, suggests designs and mounting techniques for small mirrors, explains the benefits of kinematic design and uses of flexures, describes how to analyze various types of opto-mechanical interfaces, demonstrates how the strength of glass can be determined and how to estimate stress generated in optics, and explains how changing temperature affects opto-mechanical assemblies.
Download or read book Opto Mechanical Systems Design Two Volume Set written by Paul Yoder and published by CRC Press. This book was released on 2018-12-14 with total page 1280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Opto-Mechanical Systems Design, Fourth Edition is different in many ways from its three earlier editions: coauthor Daniel Vukobratovich has brought his broad expertise in materials, opto-mechanical design, analysis of optical instruments, large mirrors, and structures to bear throughout the book; Jan Nijenhuis has contributed a comprehensive new chapter on kinematics and applications of flexures; and several other experts in special aspects of opto-mechanics have contributed portions of other chapters. An expanded feature—a total of 110 worked-out design examples—has been added to several chapters to show how the theory, equations, and analytical methods can be applied by the reader. Finally, the extended text, new illustrations, new tables of data, and new references have warranted publication of this work in the form of two separate but closely entwined volumes. The first volume, Design and Analysis of Opto-Mechanical Assemblies, addresses topics pertaining primarily to optics smaller than 50 cm aperture. It summarizes the opto-mechanical design process, considers pertinent environmental influences, lists and updates key parameters for materials, illustrates numerous ways for mounting individual and multiple lenses, shows typical ways to design and mount windows and similar components, details designs for many types of prisms and techniques for mounting them, suggests designs and mounting techniques for small mirrors, explains the benefits of kinematic design and uses of flexures, describes how to analyze various types of opto-mechanical interfaces, demonstrates how the strength of glass can be determined and how to estimate stress generated in optics, and explains how changing temperature affects opto-mechanical assemblies. The second volume, Design and Analysis of Large Mirrors and Structures, concentrates on the design and mounting of significantly larger optics and their structures, including a new and important topic: detailed consideration of factors affecting large mirror performance. The book details how to design and fabricate very large single-substrate, segmented, and lightweight mirrors; describes mountings for large mirrors with their optical axes in vertical, horizontal, and variable orientations; indicates how metal and composite mirrors differ from ones made of glass; explains key design aspects of optical instrument structural design; and takes a look at an emerging technology—the evolution and applications of silicon and silicon carbide in mirrors and other types of components for optical applications.
Download or read book Catalogue written by International Organization for Standardization and published by . This book was released on 2008 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metrics for High quality Specular Surfaces written by Lionel R. Baker and published by SPIE Press. This book was released on 2004 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book supplies the optical component and systems designer, and quality assurance engineers and managers with the definitions, measurement principles, and standard metrics used to characterize high-quality specular surfaces. The author covers both the traditional visual methods as well as newer (but not necessarily better) computer-aided techniques and describes the metrics adopted by the new ISO standards, including the setting of form and finish tolerances. Key issues of industry are raised, to help stimulate research and development of new methods and standards that blend the best of the old and new approaches to surface assessment.
Download or read book Handbook of Optical Systems Volume 3 written by Herbert Gross and published by Wiley-VCH. This book was released on 2007-04-09 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: The state-of-the-art full-colored handbook gives a comprehensive introduction to the principles and the practice of calculation, layout, and understanding of optical systems and lens design. Written by reputed industrial experts in the field, this text introduces the user to the basic properties of optical systems, aberration theory, classification and characterization of systems, advanced simulation models, measuring of system quality and manufacturing issues. In this Volume Volume 3 focuses on the treatment of aberration. By deriving and applying image quality criteria, the reader is introduced to techniques to correct his or her optical system for aberrations and to optimize it under the chosen criteria. Thorough treatment is given to gradient and illumination systems as well as to the topic of tolerances. The volume is rounded off with a chapter on the integration of the correction scheme developed into the existing system. Finally the software package OPTALIX is introduced as an advanced solution for integrated quality management of optical systems. Other Volumes Volume 1: Fundamentals of Technical Optics Volume 2: Physical Image Formation Volume 4: Survey of Optical Instruments Volume 5: Advanced Physical Optics
Download or read book Optics Manufacturing written by Christoph Gerhard and published by CRC Press. This book was released on 2017-12-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical components are essential key elements in modern engineering and everyday life. The education of skilled personnel and specialists in the fields of theoretical and practical optics manufacturing is of essential importance for next-generation technologies. Against this background, this book provides the basis for the education and advanced training of precision and ophthalmic optics technicians, craftsmen, and foremen, and it is an extensive reference work for students, academics, optical designers or shop managers, and production engineers. It not only covers particularly used and applied machines, working materials, testing procedures, and machining steps for classical optics manufacturing, but it also addresses the production and specification of optical glasses as well as unconventional production techniques and novel approaches. Optics Manufacturing: Components and Systems furthermore covers the basics of light propagation and provides an overview on optical materials and components; presents an introduction and explanation of the necessary considerations and procedures for the initial definition of manufacturing tolerances and the relevant industrial standards for optics manufacturing; and addresses the production of micro optics, the assembly of opto-mechanical setups and possible manufacturing errors, and the impact of the resulting inaccuracies. In order to allow fast and clear access to the most essential information, each chapter ends with a short summary of the most important aspects, including an explanation of relevant equations, symbols, and abbreviations. For further reading, extensive lists of references are also provided. Finally, exercises on the covered basic principles of optics, approaches, and techniques of optics manufacturing—including their corresponding detailed solutions—are found in the appendix.
Download or read book Products and Services Catalogue written by and published by . This book was released on 2000 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Holographic Methods written by Stephan Stuerwald and published by Springer. This book was released on 2018-10-12 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents not only the simultaneous combination of optical methods based on holographic principles for marker-free imaging, real-time trapping, identification and tracking of micro objects, but also the application of substantial low coherent light sources and non-diffractive beams. It first provides an overview of digital holographic microscopy (DHM) and holographic optical tweezers as well as non-diffracting beam types for minimal-invasive, real-time and marker-free imaging as well as manipulation of micro and nano objects. It then investigates the design concepts for the optical layout of holographic optical tweezers (HOTs) and their optimization using optical simulations and experimental methods. In a further part, the book characterizes the corresponding system modules that allow the addition of HOTs to commercial microscopes with regard to stability and diffraction efficiency. Further, based on experiments and microfluidic applications, it demonstrates the functionality of the combined setup, and discusses several types of non-diffracting beams and their application in optical manipulation. The book shows that holographic optical tweezers, including several non-diffracting beam types like Mathieu beams, combined parabolic and Airy beams, not only open up the possibility of generating efficient multiple dynamic traps for micro and nano particles with forces in the pico and nano newton range, but also the opportunity to exert optical torque with special beams like Bessel beams, which can facilitate the movement and rotation of particles by generating microfluidic flows. The last part discusses the potential use of a slightly modified DHM-HOT-system to explore the functionality of direct laser writing based on a two photon absorption process in a negative photoresist with a continuous wave laser
Download or read book Handbook of Optical Systems Volume 5 written by Bernd D¿rband and published by John Wiley & Sons. This book was released on 2012-05-14 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: The state-of-the-art full-colored handbook gives a comprehensive introduction to the principles and the practice of calculation, layout, and understanding of optical systems and lens design. Written by reputed industrial experts in the field, this text introduces the user to the basic properties of optical systems, aberration theory, classification and characterization of systems, advanced simulation models, measuring of system quality and manufacturing issues. In this Volume Volume 5 topics comprise the methods of measuring the properties of optical systems. The different fundamental techniques, such as propagation measurement and polarimetry, are introduced and discussed in detail and clarity. The presentation allows the reader, after having devised an optical system, to perform the measurements best suited to ascertain that the system fulfills the specific needs and requirements. The following chapters provide a survey on materials, coatings and surfaces of optical components, and combine this with a treatment of light and radiation. The book thus serves as a one-stop reference for metrology of optical systems. Other Volumes Volume 1: Fundamentals of Technical Optics Volume 2: Physical Image Formation Volume 3: Aberration Theory and Correction of Optical Systems Volume 4: Survey of Optical Instruments
