Download or read book Irrigation and Hydraulic Design General principles of hydraulic design written by Serge Leliavsky and published by . This book was released on 1955 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Small Hydraulic Structures written by D. B. Kraatz and published by . This book was released on 1975 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Irrigation and Hydraulic Design Irrigation works written by Serge Leliavsky and published by . This book was released on 1957 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Library List written by National Agricultural Library (U.S.) and published by . This book was released on 1968 with total page 1304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Irrigation Engineering and Hydraulic Structures written by Sharma S.K. and published by S. Chand Publishing. This book was released on with total page 1199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Irrigation Engineering and Hydraulic Structures comprehensively deals with all aspects of Irrigation in India, soil moisture and different types of irrigation systems including but not limited to Sprinkler, Tubewell, Canal and Micro-Irrigation. The book also focuses on Engineering Hydrology, Dams, Water Power Engineering as well as Irrigation Water Management. Special care has been taken to highlight the principles, practices and design procedures that have been widely recommended as well as suggest improvements in the application of existing methods and adoption of latest techniques used in other parts of the world.
Download or read book Journal of the American Water Works Association written by and published by . This book was released on 1961 with total page 1820 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 2012- contain only executive summaries of articles.
Download or read book Irrigation design manual written by Food and Agriculture Organization of the United Nations and published by Food & Agriculture Org.. This book was released on 2023-03-27 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction about what this manual is covering concentrating on Large Scale Irrigation (LSI), diversion barrage or weir, intake (with auxiliary structures), and most common conveyance structures suitable for LSI. A very brief overview of an approach to match water needs with water availability (demand vs supply) with references and links to Food and Agriculture Organization (FAO) literature that is covering the topic in detail. A brief reference to the most common methods to obtain necessary hydrological parameters for IRR scheme design. A very brief overview of the importance of knowledge of geological conditions and the investigation needed to obtain geotechnical design parameters (including the most common geotechnical tests to obtain design parameters). Planning phase considerations regarding diversion and intake structure, discussing the role of the main components. More technical discussion on each component of the weir or intake, including formula and worked examples (hydraulic and structural computations). Conceptual, hydraulic, and structural considerations of main conveyance components, with emphasis and more detail on most used components (such as canals, siphons, aqueducts, retaining walls, etc.). A very brief overview of the approach to irrigation water management and Operations & Maintenance (O&M), with references and links to FAO literature that is covering the topic in detail. Standard specification for irrigation construction material.
Download or read book Clarkson Bulletin written by Clarkson College of Technology and published by . This book was released on 1908 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Design of Stilling Basins and Energy Dissipators written by A. J. Peterka and published by Createspace Independent Pub. This book was released on 2015-03-04 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although hundreds of stilling basins and energydissipating devices have been designed in conjunction with spillways, outlet works, and canal structures, it is often necessary to make model studies of individual structures to be certain that these will operate as anticipated. The reason for these repetitive tests is that a factor of uncertainty exists regarding the overall performance characteristics of energy dissipators. The many laboratory studies made on individual structures over a period of years have been made by different personnel, for different groups of designers, each structure having different allowable design limitations. Since no two structures were exactly alike, attempts to generalize the assembled data resulted in sketchy and, at times, inconsistent results having only vague connecting links. Extensive library research into the works of others revealed the fact that the necessary correlation factors are nonexistent. To fill the need for up-to-date hydraulic design information on stilling basins and energy dissipators, a research program on this general subject was begun with a study of the hydraulic jump, observing all phases as it occurs in open channel flow. With a broader understanding of this phenomenon it was then possible to proceed to the more practical aspects of stilling basin design. This monograph generalizes the design of stilling basins, energy dissipators of several kinds and associated appurtenances. General design rules are presented so that the necessary dimensions for a particular structure may be easily and quickly determined, and the selected values checked by others without the need for exceptional judgment or extensive previous experience. Proper use of the material in this monograph will eliminate the need for hydraulic model tests on many individual structures, particularly the smaller ones. Designs of structures obtained by following the recommendations presented here will be conservative in that they will provide a desirable factor of safety. However, model studies will still prove beneficial to reduce structure sizes further, to account for nonsymmetrical conditions of approach or getaway, or to evaluate other unusual conditions not described herein.
Download or read book Journal of the American Water Works Association written by American Water Works Association and published by . This book was released on 1961 with total page 1294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volumes for 2012- contain only executive summaries of articles.
Download or read book Hydraulic Design of Side Weirs written by R. W. P. May and published by Thomas Telford. This book was released on 2003 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Side weirs are widely used to divert or discharge flows from reservoirs, rivers, artificial channels and sewers. The hydraulic behaviour of this type of weir is complex and difficult to predict accurately using simple methods and the diversity of applictions of side weirs has the potential to complicate guidance. This manual covers the fundamental hydraulic principles and discusses the practical design issues separately for each main strcuture type.
Download or read book Hydraulic Principles and Design Concepts for Submain Units with Multiple Outlet Pipelines written by Gürol Yıldırım and published by Springer Nature. This book was released on 2023-06-25 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a state-of-the-art review of recent analytical developments on multi-outlets pipe flow hydraulics and alternative hydraulic design concepts. For this purpose, the book presents simple, but sufficiently accurate analytical equations, that can be applied directly without needing any numerical technique to achieve whole hydraulic computations. The analytical procedures explained here give an opportunity for designers to better understand the basic hydraulic principles of multi-outlet pipe flow, and demonstrate their applicability and efficiency to design problems of multi-outlet sub-main lines, covering various design configurations.
Download or read book A Basic Collection for Scientific and Technical Libraries written by Effie B. Lunsford and published by . This book was released on 1971 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulletin of Clarkson College of Technology written by Clarkson College of Technology and published by . This book was released on 1912 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Trickle Irrigation for Crop Production written by F.S. Nakayama and published by Elsevier. This book was released on 2012-12-02 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: An entirely new agricultural technology, trickle or drip irrigation, began its development in the early 1960's. Initial progress was sporadic even though the advantages in water management with trickle systems were recognized. Operators were reluctant to use the system because of its high initial cost and questions regarding its reliability. Once the main problems were isolated and solutions developed to make the system reliable, rapid acceptance by the growers resulted. Today, trickle irrigation is being used on crops that were earlier considered to be uneconomical. This multi-purpose handbook brings together current knowledge from various engineering and scientific disciplines (crop, hydraulic, irrigation and soil sciences) needed for understanding the trickle irrigation system for crop production. The two dozen contributors are experts on the various subjects, which range from the basic to the more practical aspects of trickle irrigation. Major topics include design, operation and management - with individual chapters covering historical development, emitter construction and clogging, system design, water and salt distribution, automation, water treatment, irrigation scheduling, maintenance, fertilization and salinity.The book greatly expands the scope of research papers, reviews, extension bulletins, and updates earlier text with new information on trickle systems. A multi-disciplinary approach has been taken on a multi-faceted subject. The material contained in the book is the most comprehensive yet developed on the topic. Illustrative sample problems and solutions provide field operators and extension personnel with information needed to install and maintain trickle systems. As it is up-to-date, it is useful as a teaching and reference source for students, manufacturers and irrigation system operators as well as irrigation and crop specialists, and consultants.
Download or read book Seepage Hydraulics written by G. Kovács and published by Elsevier. This book was released on 2011-08-19 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seepage Hydraulics
Download or read book Microirrigation for Crop Production written by and published by Elsevier. This book was released on 2006-09-28 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microirrigation has become the fastest growing segment of the irrigation industry worldwide and has the potential to increase the quality of food supply through improved water fertilizer efficiency. This book is meant to update the text "Trickle Irrigation, Design, Operation and Management". This text offers the most current understanding of the management criteria needed to obtain maximum water and fertilization efficiency.* Presents a detailed explanation of system design, operation, and management specific to various types of MI systems* Analyzes proper use of irrigation technology and its effect to increase efficiency* Provides an understanding to the basic science needed to comprehend operation and management* Over 150 figures of designs and charts of systems including, surface drip, subsurface drip, spray/microsprinkler, and more
