Download or read book Irradiation Creep Behavior of the Fusion Heats of HT9 and Modified 9Cr 1 Mo Steels written by Raymond J. Puigh and published by . This book was released on 1990 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-reactor creep data on the fusion heats of HT9 and a modified 9Cr-1Mo steel have been obtained from the irradiation of pressurized tube specimens in the FFTF reactor. These irradiations were conducted on specimens that reached approximately 50 dpa at 400 to 540°C and that used hoop stresses ranging from 0 to 200 MPa. The creep behavior of these two alloys was found to be similar to and consistent with creep data on related alloys irradiated in either EBR-II or the Fast Flux Test Facility (FFTF). A correlation describing the irradiation-induced creep component of deformation has been developed and compared with the available data.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-05 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Energy Update written by and published by . This book was released on 1983 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Fusion by Inertial Confinement written by Guillermo Velarde and published by CRC Press. This book was released on 2020-11-25 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Fusion by Inertial Confinement provides a comprehensive analysis of directly driven inertial confinement fusion. All important aspects of the process are covered, including scientific considerations that support the concept, lasers and particle beams as drivers, target fabrication, analytical and numerical calculations, and materials and engineering considerations. Authors from Australia, Germany, Italy, Japan, Russia, Spain, and the U.S. have contributed to the volume, making it an internationally significant work for all scientists working in the Inertial Confinement Fusion (ICF) field, as well as for graduate students in engineering and physics with interest in ICF.
Download or read book Creep Resistant Steels written by Fujio Abe and published by Elsevier. This book was released on 2008-03-14 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep-resistant steels are widely used in the petroleum, chemical and power generation industries. Creep-resistant steels must be reliable over very long periods of time at high temperatures and in severe environments. Understanding and improving long-term creep strength is essential for safe operation of plant and equipment. This book provides an authoritative summary of key research in this important area.The first part of the book describes the specifications and manufacture of creep-resistant steels. Part two covers the behaviour of creep-resistant steels and methods for strengthening them. The final group of chapters analyses applications in such areas as turbines and nuclear reactors.With its distinguished editors and international team of contributors, Creep-resistant steels is a valuable reference for the power generation, petrochemical and other industries which use high strength steels at elevated temperatures. - Describes the specifications and manufacture of creep-resistant steels - Strengthening methods are discussed in detail - Different applications are analysed including turbines and nuclear reactors
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Annual Index written by and published by . This book was released on 1989 with total page 1676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1984-03 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Alloys for Nuclear Energy Applications written by Robert Odette and published by Newnes. This book was released on 2019-08-15 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-performance alloys that can withstand operation in hazardous nuclear environments are critical to presentday in-service reactor support and maintenance and are foundational for reactor concepts of the future. With commercial nuclear energy vendors and operators facing the retirement of staff during the coming decades, much of the scholarly knowledge of nuclear materials pursuant to appropriate, impactful, and safe usage is at risk. Led by the multi-award winning editorial team of G. Robert Odette (UCSB) and Steven J. Zinkle (UTK/ORNL) and with contributions from leaders of each alloy discipline, Structural Alloys for Nuclear Energy Applications aids the next generation of researchers and industry staff developing and maintaining steels, nickel-base alloys, zirconium alloys, and other structural alloys in nuclear energy applications. This authoritative reference is a critical acquisition for institutions and individuals seeking state-of-the-art knowledge aided by the editors' unique personal insight from decades of frontline research, engineering and management. - Focuses on in-service irradiation, thermal, mechanical, and chemical performance capabilities. - Covers the use of steels and other structural alloys in current fission technology, leading edge Generation-IV fission reactors, and future fusion power reactors. - Provides a critical and comprehensive review of the state-of-the-art experimental knowledge base of reactor materials, for applications ranging from engineering safety and lifetime assessments to supporting the development of advanced computational models.
Download or read book INIS Atomindex written by and published by . This book was released on 1987 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Energy and Environmental Materials written by Yafang Han and published by Springer. This book was released on 2018-04-17 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume gathers selected papers presented at the Chinese Materials Conference 2017 (CMC2017), held in Yinchuan City, Ningxia, China, on July 06-12, 2017. This book covers a wide range of energy conversion and storage materials, thermoelectric materials and devices, nuclear materials, solar energy materials and solar cells, minerals and oil and gas materials, photocatalytic materials for energy production, eco-materials, and environmental engineering materials. The Chinese Materials Conference (CMC) is the most important serial conference of the Chinese Materials Research Society (C-MRS) and has been held each year since the early 1990s. The 2017 installment included 37 Symposia covering four fields: Advances in energy and environmental materials; High performance structural materials; Fundamental research on materials; and Advanced functional materials. More than 5500 participants attended the congress, and the organizers received more than 700 technical papers. Based on the recommendations of symposium organizers and after peer reviewing, 490 papers have been included in the present proceedings, which showcase the latest original research results in the field of materials, achieved by more than 300 research groups at various universities and research institutes.
Download or read book Metals Abstracts written by and published by . This book was released on 1995 with total page 1602 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1985 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of Topical Conference on Ferritic Alloys for Use in Nuclear Energy Technologies Snowbird Utah June 19 23 1983 written by John Wolfersperger Davis and published by Society for Mining Metallurgy & Exploration. This book was released on 1984 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics Briefs written by and published by . This book was released on 1993 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Technology of Fusion Reactors written by Minoru Akiyama and published by World Scientific. This book was released on 1991 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the contributions of over 40 outstanding applied physicists from Japan specializing in this area of design technology. Among them are K Miya, S Yamamoto, M Ohnishi, Y Ogawa, Y Sakai, T Kuroda, H Nariai, K Miyazaki, H Madarame, M Saitoh.The topics discussed extensively include: Plasma; First Wall and Impurity Control Engineering; Blanket and Shield; Magnet; Heating; Power Supply; Tritium Systems; Fuel Supply System; Remote Handling; Vacuum System; Building; Cooling System; Fundamentals for Design Technology.
Download or read book Optimizing Materials for Nuclear Applications written by F. A. Garner and published by . This book was released on 1985 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
