Download or read book Inside the Iron Works written by George M. Skurla and published by US Naval Institute Press. This book was released on 2004 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rise and fall of Grumman Aerospace, one of America's largest military aircraft manufacturers, told through the eyes of the company's one-time president and chairman.
Download or read book Bath Iron Works written by Andrew C. Toppan and published by Arcadia Publishing. This book was released on 2002-08-28 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bath Iron Works was established by Gen. Thomas Hyde in 1884 and launched its first ship in 1891. Since then, the shipyard on the Kennebec River has built dozens of luxurious yachts, hardworking freighters, tugs, trawlers, lightships, and more than two hundred twenty warships for the U.S. Navy. Today, Bath Iron Works continues a shipbuilding tradition that began nearly four hundred years ago when the first ship built in America was constructed just a few miles downriver from Bath. Bath Iron Works showcases a unique collection of photographs that provides a rare view inside one of the nation's great shipyards. The book shows the yard's origins in a few simple buildings, its expansion into a modern shipbuilding facility, and its rapid growth into an industrial powerhouse during World War II. During these years, Bath Iron Works produced famous ships such as the America's Cup defender Ranger, the yachts Aras and Hi-Esmaro, the record-setting destroyer USS Lamson, and fully one fourth of all destroyers built for the U.S. Navy during World War II. Bath Iron Works gives an insider's view of these great vessels and many others, as skilled craftspeople turn raw materials into complex ships, each uniquely suited to its purpose. This collection of shipbuilding photographs brings to life the proud history of Bath Iron Works.
Download or read book Ironworks written by Terry C. Treadwell and published by Arcadia Publishing (SC). This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The company that Leroy Grumman founded in 1929 has been linking with the aircraft of the US Navy since 1930. Grumman aircraft have been in every major conflict from the Second World War through Korea and Vietnam to the Gulf and Bosnia. Their factory in Bethpage, Long Island, New York, (affectionately known as the 'Ironworks') produced some of the best carrier-borne aircraft ever made including the TBM Avenger (most successful torpedo bomber of all time), the Hellcat and Wildcat as well as the F-14 Tomcat and A-6 Intruder. Grumman-built Lunar Modules were used in the Apollo space missions and successfully landed men on the moon. The Ironworks is a comprehensive history of the Grumman Corporation and its many aircraft, both civil and military. -- Back cover.
Download or read book Ironworks of the United States written by American Iron and Steel Association and published by . This book was released on 1884 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: 11th-14th editions include: A complete list of the iron and steel works of Canada and Mexico; 15th includes: A complete list of the iron and steel works of Canada.
Download or read book The Ironworks of the United States Directory of the Furnaces Rolling Mills Steel Works Forges and Bloomaries in Every State written by American Iron And Steel Association and published by Legare Street Press. This book was released on 2022-10-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Directory of Iron and Steel Works of the United States and Canada written by and published by . This book was released on 1880 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vanishing Ironworks of the Ramapos written by James M. Ransom and published by Fall Creek Books. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the story of early iron mining and manufacturing, and what remains to be seen today, in the hills that cross the northeastern border of New Jersey into New York. Centrally located in the Colonies, New Jersey was in an especially advantageous position: its waterways provided power and excellent transportation and its dense forests furnished the charcoal essential for making pig and bar iron. During the two major wars on American soil New Jersey and New York ironworks turned out badly needed supplies--among them the huge chains and booms used to block the British advance up the Hudson during the Revolution--and ordnance, made and shipped in record-breaking time, for Union troops. This is also the story of the hardy men who made this industry possible--where they came from, what their homes and company towns were like, how they lived, and how they left their mark on American history. James M. Ransom spent twenty-five years inspecting remains of mines (seventy-five are described and located), furnaces and forges, dams and millraces, and other ruins closely associated with iron production in the Ramapo region. But not all was on-site research. He also searched through old account books, newspapers, and records, evaluating their historical importance. When word spread of his intense interest in the field, he was offered material unknown to historians--in particular, a collection of old ledgers, some dating back two hundred years, and a group of rare photographs from 1865 to 1905. From such extensive investigation, Ransom uncovered previously unknown facts, filled in gaps, and corrected mistakes made by earlier writers on the subject.
Download or read book Tredegar Iron Works Richmond s Foundry on the James written by Nathan Vernon Madison and published by Arcadia Publishing. This book was released on 2015 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most important industrial landmarks in the nation lies in the heart of historic Richmond. The Tredegar Iron Works was the most prodigious ordnance supplier to the Confederacy during the Civil War, as well as an industrial behemoth in its own right. Named for the hometown of the Welsh engineers who built it, Tredegar remained one of Richmond's chief industrial entities for over a century. It produced ordnance during five wars and helped build the railroads that rapidly spread across the nation during the Gilded Age. Author Nathan Vernon Madison, utilizing a wealth of primary sources and firsthand accounts, chronicles the full history of a Richmond industrial icon.
Download or read book The Ironworks of the United States written by American Iron and Steel Association and published by . This book was released on 2018-04-27 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ornamental Ironwork written by Michael Southworth and published by McGraw-Hill Professional Publishing. This book was released on 1992 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on the history and technology of architectural ironwork aims to impart an understanding of the myriad of forms and uses to which ironwork has been put. In addition, the book describes techniques for restoring and preserving ornamental ironwork. Also shown are many of the traditional patterns and design motifs which can be used as tracings for contemporary design.
Download or read book Ironworks of the United States written by American Iron and Steel Association and published by . This book was released on 1892 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: 11th-14th editions include: A complete list of the iron and steel works of Canada and Mexico; 15th includes: A complete list of the iron and steel works of Canada.
Download or read book IRONWORKS OF THE US written by American Iron and Steel Association and published by Wentworth Press. This book was released on 2016-08-29 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Ironmaker to the Confederacy written by Charles B. Dew and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Charles Dew's unsurpassed Ironmaker to the Confederacy tells the story of the South's premier ironworks & its intrepid owner, Joseph Reid Anderson. Dew's detailed & rich account masterfully describes Tredegar's struggle to supply the Confederate nation with the weapons of war & is a seminal study of southern manufacturing & industrial slavery. The revised edition includes a new preface by Dr. Dew, additional illustrations, and redesigned maps of the ironworks based on new site research and archaelogy.
Download or read book Mastering Iron written by Anne Kelly Knowles and published by University of Chicago Press. This book was released on 2013-01-15 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Veins of iron run deep in the history of America. Iron making began almost as soon as European settlement, with the establishment of the first ironworks in colonial Massachusetts. Yet it was Great Britain that became the Atlantic world’s dominant low-cost, high-volume producer of iron, a position it retained throughout the nineteenth century. It was not until after the Civil War that American iron producers began to match the scale and efficiency of the British iron industry. In Mastering Iron, Anne Kelly Knowles argues that the prolonged development of the US iron industry was largely due to geographical problems the British did not face. Pairing exhaustive manuscript research with analysis of a detailed geospatial database that she built of the industry, Knowles reconstructs the American iron industry in unprecedented depth, from locating hundreds of iron companies in their social and environmental contexts to explaining workplace culture and social relations between workers and managers. She demonstrates how ironworks in Alabama, Maryland, Pennsylvania, and Virginia struggled to replicate British technologies but, in the attempt, brought about changes in the American industry that set the stage for the subsequent age of steel. Richly illustrated with dozens of original maps and period art work, all in full color, Mastering Iron sheds new light on American ambitions and highlights the challenges a young nation faced as it grappled with its geographic conditions.
Download or read book Colonial Ironwork in Old Philadelphia written by Philip B. Wallace and published by Courier Corporation. This book was released on 1998-01-01 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lavishly illustrated tribute to Philadelphia's many well-preserved examples of colonial ironwork features 182 crisp black-and-white photographs and 41 measured drawings of ornamented railings and gates, marble steps, balconies, lanterns, and more.
Download or read book Traditional Ironwork Designs written by Josef Feller and published by Courier Corporation. This book was released on 2013-03-21 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: From an exceptional collection of the finest examples of German ironwork comes this rich source of royalty-free images for artists and craftspeople. More than 270 illustrations depict a broad variety of magnificent ironworks from the city of Düsseldorf, with finely rendered examples of the craft ranging from elaborate castle gates to ornate weather vanes. Balustrades, screens, balcony railings, and other decorative ironworks abound in this handsome compilation. Derived from a rare, turn-of-the-century portfolio, these splendid designs offer uncommon glimpses of a rich array of motifs that are sure to inspire and delight designers, architecture enthusiasts, antique lovers, and devotees of vintage ironwork.
Download or read book The Ironworks of the United States written by American Iron and Steel Association and published by . This book was released on 1876 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
