Download or read book Iron Ores and Iron Oxides New Perspectives written by Brajesh Kumar and published by BoD – Books on Demand. This book was released on 2023-09-13 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid development in engineering and biomedical applications of iron and iron oxide materials has attracted the attention of researchers around the world. discusses the extraction, synthesis, characterization, and applications of iron, iron oxide, and their nanoparticles/nanocomposites. It includes six chapters that address such topics as environmentally friendly techniques for engineering iron nanoparticles, the application of nano-dimensional iron oxide nanoparticles with nanotoxicology, biomedical applications of superparamagnetic iron oxide nanoparticles, and much more.
Download or read book Iron Ores and Iron Oxide Materials written by Volodymyr Shatokha and published by BoD – Books on Demand. This book was released on 2018-07-11 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the multidisciplinary reading audience with a comprehensive state-of-the-art overview of research and innovations in the relationship between iron ores and iron ore materials. The book covers industrial sectors dealing with exploration and processing of iron ores as well as with advanced applications for iron ore materials and therefore entails a wide range of research fields including geology, exploration, beneficiation, agglomeration, reduction, smelting, and so on, thus encouraging life cycle thinking across the entire production chain. Iron remains the basis of modern civilization, and our sustainable future deeply depends upon our ability to satisfy the growing demand for iron and steel while decoupling hazardous emissions from economic growth. Therefore, environmental sustainability aspects are also broadly addressed. In response to socioeconomic and climatic challenges, the iron ore sector faces, this book delivers a vision for the new opportunities linked to deployment of the best available, innovative and breakthrough technologies as well as to advanced material applications.
Download or read book The Iron Oxides written by Rochelle M. Cornell and published by John Wiley & Sons. This book was released on 2006-12-13 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together in one, compact volume all aspects of the available information about the iron oxides. It presents a coherent, up to date account of the properties, reactions and mechanisms of formation of these compounds. In addition, there are chapters dealing with iron oxides in rocks and soils, as biominerals and as corrosion products together with methods of synthesis and the numerous application of these compounds. Their role in the environment is also discussed. The authors are experts in the field of iron oxides and have worked on all the topics covered. Much recent data from the authors' own laboratories is included and opportunities for further research are indicated. Special features are the electron micrographs and colour plates together with the many different spectra used to illustrate properties and aspects of behaviour. Numerous tables and graphs enable trends and relationships to be seen at a glance. The book concludes with an extensive bibliography. This book should prove invaluable to industry and to all researchers who, whatever their background and level of experience, are interested in this rapidly expanding field. It is an essential volume for any scientific library and is now in its second, completely revised and extended edition!
Download or read book The Chemistry of Weathering written by J.I. Drever and published by Springer Science & Business Media. This book was released on 1985-03-31 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several important developments in our understanding of the chemistry of weathering have occurred in the last few years: 1. There has been a major breakthrough in our understanding of the mechanisms controlling the kinetics of sil icate dissolution, and there have been major advances in computer modeling of weathering processes. 2. There has been a growing recognition of the importance of organic solutes in the weathering process, and hence of the inter-relationships between mineral weathering and the terrestrial ecosystem. 3. The impact of acid deposition ("acid rain") has been widely recognized. The processes by which acid deposition is neutral ized are closely related to the processes of normal chemical weathering; an understanding of the chemistry of weathering is thus essential for predicting the effects of acid deposition. 4. More high-qual ity data have become available on the chemical dynamics of smal I watersheds and large river systems, which represent the integrated effects of chemical weathering.
Download or read book The Reduction of Iron Ores written by Ludwig von Bogdandy and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the English edition the book was revised by the authors, taking into account a number of suggestions of the readers of the German edition. Some of the most important publications in the field of iron ore reduction, which appeared since 1967, have been used to bring the manuscript as far as possible up to date. The kind assistance of Dr. K. BOHNENKAMP of the Max-Planck-Institut fUr Eisenforschung, Dusseldorf, was much appreciated in this respect. Ohapters 2.9 and 2.10, dealing with the reduction of molten oxide slags by solid carbon and with the contribution of the water-gas reaction to iron ore reduction, have been added for the English edition. Ohapter 2.9 has been completely revised with the kind assistance of Dr. H. J. GRABKE, Stuttgart. Dipl.-Ing. J. LODDE contributed to this edition by revising the bibliography. Owing to the rapid development of the blast furnace it was necessary to revise Ohapter 5 considerably. In this field many valuable suggestions have been made by Dipl.-Ing. G. LANGE and Dipl.-Ing. P. HEINRICH. Furthermore, Ohapters3 and 4 have been thoroughly revised by Dr.-Ing. E. FORSTER and Dr.-Ing. U. SCHIERLOH. Last, but not least, we have to thank our translators for their excellent work.
Download or read book Mineral Processing Design and Operation written by Ashok Gupta and published by Elsevier. This book was released on 2006-06-26 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral Processing Design and Operations is expected to be of use to the design engineers engaged in the design and operation of mineral processing plants and including those process engineers who are engaged in flow-sheets development.Provides an orthodox statistical approach that helps in the understanding of the designing of unit processes. The subject of mineral processing has been treated on the basis of unit processes that are subsequently developed and integrated to form a complete strategy for mineral beneficiation. Unit processes of crushing, grinding, solid–liquid separation, flotation are therefore described in some detail so that a student at graduate level and operators at plants will find this book useful. Mineral Processing Design and Operations describes the strategy of mathematical modeling as a tool for more effective controlling of operations, looking at both steady state and dynamic state models.* Containing 18 chapters that have several worked out examples to clarify process operations* Filling a gap in the market by providing up-to-date research on mineral processing* Describes alternative approaches to design calculation, using example calculations and problem exercises
Download or read book SPONGE IRON PRODUCTION BY DIRECT REDUCTION OF IRON OXIDE written by AMIT CHATTERJEE and published by PHI Learning Pvt. Ltd.. This book was released on 2012-09-12 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a fascinating study of the very important emerging field of direct reduction in which iron ore is ‘directly reduced’ in the solid-state, using either natural gas or non-coking coal, to produce a highly metallised material, referred to as sponge iron (or direct reduced iron). This intermediate product is subsequently melted in electric arc furnaces or induction furnaces (sometimes even in basic oxygen furnaces) to produce liquid steel. Such a process combination enables steel to be produced without using coking coal, which is an expensive input in the normal blast furnace—basic oxygen furnace route of steelmaking adopted in integrated steel plants. The book offers comprehensive coverage and critical assessment of various coal-based and gas-based direct reduction processes. Besides dealing with the application of the theoretical principles involved in the thermodynamics and kinetics of direct reduction, the book also contains some worked-out examples on sponge iron production. The concluding part of this seminal book summarises the present and future scenario of direct reduction, including the use of gas generated from coal in direct reduction processes. The book is primarily intended for the undergraduate and postgraduate students of metallurgical engineering. It is also a must-read for researchers, technologists and process metallurgists engaged in the rapidly developing field of direct reduction of iron oxides, which is of critical importance for India and other developing nations that are beginning to play a major role in global steelmaking.
Download or read book Iron in Soils and Clay Minerals written by J.W. Stucki and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Probably more than any other element, iron markedly influences the chemical and physical properties of soils and sediments in the earth. Considering its transition metal status, with potential variation in electronic configuration, ionic radius, and magnetic moment, combined with its abundance and relatively large mass, little wonder that one sees its unique influence on every hand. Pre sentations at the NATO Advanced Study Institute (NATO AS!) on Iron in Soils and Clay Minerals reviewed and discussed the occurrence, behavior, and properties of Fe-bearing minerals found in soils and in the clay mineral groups kaolinite, smectite, and mica. Also discussed at the NATO AS! were the basic chemical properties of Fe, methods for separating and identifying Fe in minerals, and the role of Fe minerals in weathering and other soil-forming processes. The present publication is the reviewed and edited proceedings of that Advanced Study Institute. The sequence of chapters follows the general pattern beginning with introductory chapters which overview the general occurrence of Fe in the earth and its chemistry, both generally and in mineral environments, followed by identification and characterization methods for Fe and Fe phases in minerals. The properties and behavior of Fe oxides, Fe-bearing clay minerals, and other Fe minerals in soils are then described, and the text ends with a summary of the role of Fe in soil-forming processes. A Table of Contents and subject index are provided to assist the reader in finding specific topics within the text.
Download or read book Clean Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2019-07-18 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the available technologies that can be employed to reduce energy consumption and greenhouse emissions in the steel- and ironmaking industries. Ironmaking and steelmaking are some of the largest emitters of carbon dioxide (over 2Gt per year) and have some of the highest energy demand (25 EJ per year) among all industries; to help mitigate this problem, the book examines how changes can be made in energy efficiency, including energy consumption optimization, online monitoring, and energy audits. Due to negligible regulations and unparalleled growth in these industries during the past 15-20 years, knowledge of best practices and innovative technologies for greenhouse gas remediation is paramount, and something this book addresses. Presents the most recent technological solutions in productivity analyses and dangerous emissions control and reduction in steelmaking plants; Examines the energy saving and emissions abatement efficiency for potential solutions to emission control and reduction in steelmaking plants; Discusses the application of the results of research conducted over the last ten years at universities, research centers, and industrial institutions.
Download or read book The Economic Geology of Iran written by Mansour Ghorbani and published by Springer Science & Business Media. This book was released on 2013-03-27 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Economic Geology of Iran is a complete and comprehensive book about mineral deposits, energy and water resources of Iran. Dr. Mansour Ghorbani has travelled to each of the huge variety of locations that feature the resources covered, personally verifying the details of them all. The book starts by describing the geography and physiography of Iran as well as its various climatic regions and the diverse corresponding vegetation. Then the book gives an excellent overview of the geology of the country, followed by the history of mining in Iran up to now. The author describes also the metallogenic and mineralization phases of Iran, its mineral zones and belts, and, more generally, the distribution of mineral deposits in the country. Dr. Ghorbani gives us also an analysis of the position of Iran in terms of global mineral resources, as well as the role that the country’s mineral, energy and natural resources play in its overall economy. The book finishes with also provides a complete list of Iranian mineral deposits. This book is a perfect source of information for all students and researchers in the field of geo-science at the university level but also for mining and oil companies that would like to work, invest and get involved in such businesses in Iran.
Download or read book Iron Ores and Iron Oxide Materials written by Volodymyr Shatokha and published by . This book was released on 2018 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the multidisciplinary reading audience with a comprehensive state-of-the-art overview of research and innovations in the relationship between iron ores and iron ore materials. The book covers industrial sectors dealing with exploration and processing of iron ores as well as with advanced applications for iron ore materials and therefore entails a wide range of research fields including geology, exploration, beneficiation, agglomeration, reduction, smelting, and so on, thus encouraging life cycle thinking across the entire production chain. Iron remains the basis of modern civilization, and our sustainable future deeply depends upon our ability to satisfy the growing demand for iron and steel while decoupling hazardous emissions from economic growth. Therefore, environmental sustainability aspects are also broadly addressed. In response to socioeconomic and climatic challenges, the iron ore sector faces, this book delivers a vision for the new opportunities linked to deployment of the best available, innovative and breakthrough technologies as well as to advanced material applications.
Download or read book Biotechnology of Metals written by K.A. Natarajan and published by Elsevier. This book was released on 2018-06-13 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biotechnology of Metals: Principles, Recovery Methods and Environmental Concerns deals with all aspects of metal biotechnology in different areas, such as biogenesis, biomaterials, biomimetic strategies, biohydrometallurgy, mineral biobeneficiation, electrobioleaching, microbial corrosion, human implants, concrete biocorrosion, microbiology of environment pollution, and bioremediation. As the technology of this interdisciplinary science has diversified over the last five years, this book provides a valuable source for scientists and students in a number of disciplines, including geology, chemistry, metallurgy, microbiology, chemical engineering, environment, civil engineering, and biomedical engineering. - Offers comprehensive coverage of an interdisciplinary subject - Outlines the role of microbiology and biotechnology in mining, metallurgy, waste disposal and environmental control - Covers new topics, such as biogenesis, biomaterials processing, the role of micro-organisms in causing corrosion, and much more - Presents scientifically illustrated experimental research methods in metals biotechnology
Download or read book The Iron Oxides written by Rochelle M. Cornell and published by Wiley-VCH. This book was released on 1996-09-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together in one, compact volume all aspects of the available information about the iron oxides. It presents a coherent, up to date account of the properties, reactions and mechanisms of formation of these compounds. In addition, there are chapters dealing with iron oxides in soils, as biominerals and as corrosion products together with methods of synthesis and the numerous application of these compounds. The authors are experts in the field of iron oxides and have worked on all the topics covered. Much recent data from the authors' own laboratories is included and opportunities for further research are indicated. Special features are the electron micrographs and colour plates together with the many different spectra used to illustrate properties and aspects of behaviour. Numerous tables and graphs enable trends and relationships to be seen at a glance. The book concludes with an extensive bibliography. This book should prove invaluable to industry and to all researchers who, whatever their background and level of experience, are interested in this rapidly expanding field. It is an essential volume!
Download or read book Treatise on Process Metallurgy written by Seshadri Seetharaman and published by . This book was released on 2014 with total page 1745 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intermetallic Compounds written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2018-05-30 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermetallic compounds are usually brittle with high melting points. Their properties are often found among ceramic and metallic materials. In most cases, their hot corrosion resistance and simultaneously hardness are important. One of the main applications of intermetallic compounds is for superalloy turbine blades in which they show appropriate high-temperature-related properties. This book collects new developments about intermetallic compounds and their recent usages.
Download or read book The Iron ore Resources of Europe written by Max Roesler and published by . This book was released on 1921 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrothermal Iron Oxide Copper gold Related Deposits written by T. Michael Porter and published by . This book was released on 2002 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
