Download or read book Surface Modification and Alloying written by J.M. Poate and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.
Download or read book Surface Modification of Metals by Ion Beams 6 written by L. Guzman and published by . This book was released on 1989 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Modification of Metals by Ion Beams written by R. P. M. Procter and published by London : Elsevier Applied Science ; New York : Sole distributor in the USA and Canada, Elsevier Science Publishing Company. This book was released on 1987 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Modification to Improve Properties of Materials written by Miran Mozetič and published by MDPI. This book was released on 2019-04-16 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected contributions on surface modification to improve the properties of solid materials. The surface properties are tailored either by functionalization, etching, or deposition of a thin coating. Functionalization is achieved by a brief treatment with non-equilibrium gaseous plasma containing suitable radicals that interact chemically with the material surface and thus enable the formation of rather stable functional groups. Etching is performed in order to modify the surface morphology. The etching parameters are selected in such a way that a rich morphology of the surfaces is achieved spontaneously on the sub-micrometer scale, without using masks. The combination of adequate surface morphology and functionalization of materials leads to superior surface properties which are particularly beneficial for the desired response upon incubation with biological matter. Alternatively, the materials are coated with a suitable thin film that is useful in various applications from food to aerospace industries.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1988 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomic Molecular and Optical Physics written by National Research Council and published by National Academies Press. This book was released on 1986-02-01 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goals of atomic, molecular, and optical physics (AMO physics) are to elucidate the fundamental laws of physics, to understand the structure of matter and how matter evolves at the atomic and molecular levels, to understand light in all its manifestations, and to create new techniques and devices. AMO physics provides theoretical and experimental methods and essential data to neighboring areas of science such as chemistry, astrophysics, condensed-matter physics, plasma physics, surface science, biology, and medicine. It contributes to the national security system and to the nation's programs in fusion, directed energy, and materials research. Lasers and advanced technologies such as optical processing and laser isotope separation have been made possible by discoveries in AMO physics, and the research underlies new industries such as fiber-optics communications and laser-assisted manufacturing. These developments are expected to help the nation to maintain its industrial competitiveness and its military strength in the years to come. This report describes the field, characterizes recent advances, and identifies current frontiers of research.
Download or read book Surface Modification of Magnesium and its Alloys for Biomedical Applications written by T.S.N. Sankara Narayanan and published by Elsevier. This book was released on 2015-01-30 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of biodegradable implants which can remain in the human body to fix a problem and subsequently dissolve, or be absorbed, consumed or excreted, without warranting a secondary surgery, is very appealing to scientists. Due to their excellent biocompatibility and biodegradability, magnesium implants provide a viable option many problems associated with permanent metallic implants such as, restenosis, thrombosis, permanent physical irritation, and inability to adapt to growth and changes in human body. Volume 2 of this important new book explores practical issues of magnesium and magnesium alloys, physical and mechanical modification and coatings to enhance this material for biomedical applications. - Includes expert analysis on chemical solution deposition of hydroxyapatite (HAp) and octacalcium (OCP) phosphate coatings for magnesium - Comprehensive coverage of biomimetic modifications, surface functionalization of biomolecules, natural, conducting and biodegradable polymeric coatings - Lucid dissection of chemical, physical, mechanical and electromechanical modifications of magnesium and its alloys for biomedical applications
Download or read book Hydrogen Storage Alloys written by Shumin Han and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-09-25 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents current research progress on hydrogen storage alloys, with a special focus on their applications in batteries. Background, formation mechanisms, electrochemical characteristics, and effects of elemental substitution are covered. Provides an up-to-date overview of the theme for experienced researchers, while including enough fundamentals to serve as a handy, practical introduction for newcomers to the field.
Download or read book Surface Modification of Metals by Ion Beams 7 written by and published by . This book was released on 1992 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environment Sensitive Fracture of Metals and Alloys written by and published by . This book was released on 1987 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Engineering written by R. Kossowsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few years there has been increasing need for systematic and straregically designed experiments of surface morphology evolution resulting form ion bombardment induced sputtering. Although there is an impressive number of investi gations {1} concerned with semiconductor materials as a result of immediate applications, the most systematic investigations have been conducted with fcc metals with particular interest on single crystal Cu {2,3}. Evidence now exists that within certain para meters (i. e ion species (Ar+), ion energy (20-44 KeV), substrate 2 temperature (80-550° K), dose rate (100-500 gA cm- ) , residual x 5 9 pressure (5 10- to 5x10- mm Hg) and polar and azimuthal angle of ion incidence {4} reproducible surface morphology (etch pits and pyramids) is achieved on the (11 3 1) specific crystallographic orientation. The temporal development of individual surface features was alsoobserved in this laterstudy {4}, by employing an in situ ion source in the scanning electron microscope at Salford, a technique also empolyed in studies of the influence of polar angle of ion incidence {5} and surface contaminants {6} on the topographyof Ar+ bombarded Si. Studies have also been made on the variation of incident ion species with the (11 3 1) Cu surface and it was fully recognized {7} that residual surface contaminants when present could playa major role in dictating the morhological evolution.
Download or read book Chemical Abstracts written by and published by . This book was released on 1925 with total page 1620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Surface Modification of Alloys for Corrosion and Erosion Resistance written by C T Kwok and published by Elsevier. This book was released on 2012-03-20 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and erosion processes often occur synergistically to cause serious damage to metal alloys. Laser surface modification techniques such as laser surface melting or alloying are being increasingly used to treat surfaces to prevent corrosion or repair corroded or damaged components. Laser surface modification of alloys for corrosion and erosion resistance reviews the wealth of recent research on these important techniques and their applications.After an introductory overview, part one reviews the use of laser surface melting and other techniques to improve the corrosion resistance of stainless and other steels as well as nickel-titanium and a range of other alloys. Part two covers the use of laser surface modification to prevent different types of erosion, including liquid impingement, slurry (solid particle) and electrical erosion as well as laser remanufacturing of damaged components.With its distinguished editor and international team of contributors, Laser surface modification of alloys for corrosion and erosion resistance is a standard reference for all those concerned with preventing corrosion and erosion damage in metallic components in sectors as diverse as energy production and electrical engineering. - Reviews recent research on the use of laser surface modification techniques, including the prevention of corrosion and repair of corroded or damaged components - Discusses the techniques for improving the corrosion resistance of steels, nickel-titanium and a range of alloys - Analyses the use of laser surface modification to prevent different types of erosion, including liquid impingement and laser remanufacturing of damaged components
Download or read book Effect of Ion Irradiation on the Properties of Metals and Alloys written by Piotr Budzyński and published by Taylor & Francis. This book was released on 2024-07-31 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the interaction between ions and metallic targets as well as energy loss processes during ion implantation and irradiation. Ion bombardments of targets cause changes in surface layer chemical composition, radiation defect formation, sputtering, blistering, swelling and ion mixing. These effects modify surface topography, crystalline structure, electrical and tribological properties of metals and alloys. The book presents research on the effects of the implantation and irradiation on the friction and wear of modified materials, as well as practical applications of ion implantation and irradiation. It offers a review of current problems related to the modification of materials via irradiation. In addition, computer programs for modeling the depth of ions and vacancies in a sample are presented, and potential causes of disagreement between modeling and experimental results are described. Finally, the book provides evidence of the long-range effect. Effect of Ion Irradiation on the Properties of Metals and Alloys is aimed at academics investigating the properties of metals and alloys after irradiation and/or implantation as well as for students of engineering and physical and chemical sciences. The book is also useful for those looking for up-to-date information on these methods and ways of solving related problems, and for designers of equipment used in places exposed to high ion irradiation or to cosmic space.
Download or read book Comprehensive Nanoscience and Nanotechnology written by and published by Academic Press. This book was released on 2019-01-02 with total page 1881 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Nanoscience and Technology, Second Edition, Five Volume Set allows researchers to navigate a very diverse, interdisciplinary and rapidly-changing field with up-to-date, comprehensive and authoritative coverage of every aspect of modern nanoscience and nanotechnology. Presents new chapters on the latest developments in the field Covers topics not discussed to this degree of detail in other works, such as biological devices and applications of nanotechnology Compiled and written by top international authorities in the field
Download or read book Phase Diagrams of Binary Tungsten Alloys written by S. V. Nagender Naidu and published by . This book was released on 1991 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
