Download or read book Ion Implantation in Diamond Graphite and Related Materials written by M.S. Dresselhaus and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon has always been a unique and intriguing material from a funda mental standpoint and, at the same time, a material with many technological uses. Carbon-based materials, diamond, graphite and their many deriva tives, have attracted much attention in recent years for many reasons. Ion implantation, which has proven to be most useful in modifying the near surface properties of many kinds of materials, in particular semiconductors, has also been applied to carbon-based materials. This has yielded, mainly in the last decade, many scientifically interesting and technologically impor tant results. Reports on these studies have been published in a wide variety of journals and topical conferences, which often have little disciplinary overlap, and which often address very different audiences. The need for a review to cover in an integrated way the various diverse aspects of the field has become increasingly obvious. Such a review should allow the reader to get an overview of the research that has been done thus far, to gain an ap preciation of the common features in the response of the various carbon to ion impact, and to become aware of current research oppor allotropes tunities and unresolved questions waiting to be addressed. Realizing this, and having ourselves both contributed to the field, we decided to write a review paper summarizing the experimental and theoretical status of ion implantation into diamond, graphite and related materials.
Download or read book Advances in Sensors Reviews Vol 5 written by Sergey Yurish and published by Lulu.com. This book was released on 2018-09 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Vol. 5 of this Book Series contains 22 chapters written by 79 contributors-experts from universities, research centres and industry from 15 countries: Australia, Canada, China, France, Germany, Italy, Malaysia, Mexico, Poland, Portugal, Russia, Slovenia, Spain, Ukraine and USA. This volume contains information at the cutting edge of sensor research and related topics from the following three areas: Physical Sensors, Sensor Networks and Remote Sensing. Coverage includes current developments in various sensors, sensor instrumentation and applications. In order to offer a fast and easy reading of each topic, every chapter in this volume is independent and self-contained.With the unique combination of information in this volume, the 'Advances in Sensors: Reviews' Book Series will be of value for scientists and engineers in industry and at universities, to sensors developers, distributors, and end users.
Download or read book Graphene written by Mujtaba Ikram and published by BoD – Books on Demand. This book was released on 2023-02-15 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is considered as a miracle material for scientists and engineers owing to its outstanding physical properties. Graphene and its nanocomposites are promising multifunctional materials with improved tensile strength and elastic modulus. graphene nanocomposites may have a wide range of potential applications due to their outstanding properties and the low cost of graphene. Because graphene composites have a controllable porous structure, a large surface area, high conductivity, high-temperature stability, excellent anti-corrosion properties, and composite compatibility, they can be used in energy storage as electrocatalysts, electro-conductive additives, intercalation hosts, and an ideal substrate for active materials. Shortly, graphene will be a base for the next generation’s scientific revolution.
Download or read book Handbook of Industrial Diamonds and Diamond Films written by Mark A. Prelas and published by Routledge. This book was released on 2018-12-19 with total page 1175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines both mined and synthetic diamonds and diamond films. The text offers coverage on the use of diamond as an engineering material, integrating original research on the science, technology and applications of diamond. It discusses the use of chemical vapour deposition grown diamonds in electronics, cutting tools, wear resistant coatings, thermal management, optics and acoustics, as well as in new products.
Download or read book Power Electronics Device Applications of Diamond Semiconductors written by Satoshi Koizumi and published by Woodhead Publishing. This book was released on 2018-06-29 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Device Applications of Diamond Semiconductors presents state-of-the-art research on diamond growth, doping, device processing, theoretical modeling and device performance. The book begins with a comprehensive and close examination of diamond crystal growth from the vapor phase for epitaxial diamond and wafer preparation. It looks at single crystal vapor deposition (CVD) growth sectors and defect control, ultra high purity SC-CVD, SC diamond wafer CVD, heteroepitaxy on Ir/MqO and needle-induced large area growth, also discussing the latest doping and semiconductor characterization methods, fundamental material properties and device physics. The book concludes with a discussion of circuits and applications, featuring the switching behavior of diamond devices and applications, high frequency and high temperature operation, and potential applications of diamond semiconductors for high voltage devices. Includes contributions from today's most respected researchers who present the latest results for diamond growth, doping, device fabrication, theoretical modeling and device performance Examines why diamond semiconductors could lead to superior power electronics Discusses the main challenges to device realization and the best opportunities for the next generation of power electronics
Download or read book Ion Beam Modification of Materials written by J.S. Williams and published by Newnes. This book was released on 2012-12-02 with total page 1157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference consisted of 15 oral sessions, including three plenary papers covering areas of general interest, 22 specialist invited papers and 51 contributed presentations as well as three poster sessions. There were several scientific highlights covering a diverse spectrum of materials and ion beam processing methods. These included a wide range of conventional and novel applications such as: optical displays and opto-electronics, motor vehicle and tooling parts, coatings tailored for desired properties, studies of fundamental defect properties, the production of novel (often buried) compounds, and treating biomedical materials. The study of nanocrystals produced by ion implantation in a range of host matrices, particularly for opto-electronics applications, was one especially new and exciting development. Despite several decades of study, major progress was reported at the conference in understanding defect evolution in semiconductors and the role of defects in transient impurity diffusion. The use of implantation to tune or isolate optical devices and in forming optically active centres and waveguides in semiconductors, polymers and oxide ceramics was a major focus of several presentations at the conference. The formation of hard coatings by ion assisted deposition or direct implantation was also an area which showed much recent progress. Ion beam techniques had also developed apace, particularly those based on plasma immersion ion implantation or alternative techniques for large area surface treatment. Finally, the use of ion beams for the direct treatment of cancerous tissue was a particularly novel and interesting application of ion beams.
Download or read book Semiconductors written by Martin I. Pech-Canul and published by Springer. This book was released on 2019-01-17 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical guide to optical, optoelectronic, and semiconductor materials and provides an overview of the topic from its fundamentals to cutting-edge processing routes to groundbreaking technologies for the most recent applications. The book details the characterization and properties of these materials. Chemical methods of synthesis are emphasized by the authors throughout the publication. Describes new materials and updates to older materials that exhibit optical, optoelectronic and semiconductor behaviors; Covers the structural and mechanical aspects of the optical, optoelectronic and semiconductor materials for meeting mechanical property and safety requirements; Includes discussion of the environmental and sustainability issues regarding optical, optoelectronic, and semiconductor materials, from processing to recycling.
Download or read book Ultrananocrystalline Diamond written by Olga A. Shenderova and published by William Andrew. This book was released on 2006-08-10 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrananocrystalline Diamond: Syntheses, Properties, and Applications is a unique practical reference handbook that brings together the basic science of nanoscale carbon structures, particularly its diamond phase, with detailed information on nanodiamond synthesis, properties, and applications. Here you will learn about UNCD in its two forms, as a dispersed powder made by detonation techniques and as a chemical vapor deposited film. You will also learn about the superior mechanical, tribological, transport, electrochemical, and electron emission properties of UNCD for a wide range of applications including MEMS, NEMS, surface acoustic wave (SAW) devices, electrochemical sensors, coatings for field emission arrays, photonic and RF switching, biosensors, and neural prostheses, and more. This ôEverything about Ultra-nanocrystalline Diamondö book with 16 chapters is written by leading experts worldwide. It is for everyone who researches carbon nanostructures, everyone who produces them, everyone who characterizes them, and everyone who builds devices using them.
Download or read book Graphite Intercalation Compounds II written by Hartmut Zabel and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research on graphite intercalation compounds often acts as a forerunner for research in other sciences. For instance, the concept of staging, which is fundamental to graphite intercalation compounds, is also relevant to surface science in connection with adsorbates on metal surfaces and to high-temperature superconducting oxide layer materials. Phonon-folding and mode-splitting effects are not only basic to graphite intercalation compounds but also to polytypical systems such as supercon ductors, superlattices, and metal and semiconductor superlattices. Charge transfer effects playa tremendously important role in many areas, and they can be most easily and fundamentally studied with intercalated graphite. This list could be augmented with many more examples. The important message, however, is that graphite inter calation compounds represent a class of materials that not only can be used for testing a variety of condensed-matter concepts, but also stimulates new ideas and approaches. This volume is the second of a two-volume set. The first volume addressed the structural and dynamical aspects of graphite intercalation compounds, together with the chemistry and intercalation of new compounds. This second volume provides an up-to-date status report from expert researchers on the transport, magnetic, elec tronic and optical properties ofthis unique class of materials. The band-structure cal culations of the various donor and acceptor compounds are discussed in depth, and detailed reviews are provided ofthe experimental verification ofthe electronic struc ture in terms of their photoemission spectra and optical properties.
Download or read book Morphology Control of Materials and Nanoparticles written by Yoshio Waseda and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first major compilation of new advances covering the current status and topics related to the processing and production of precisely controlled materials. It provides a unique source of information and guidance for specialists and non-specialists alike. This book represents an extended introductory treatise on the fundamental aspects, new methods for the precise control of morphology (size, shape, composition, structure etc.) and accurate materials characterization, from both the basic science and the applied engineering viewpoints.
Download or read book Physics of New Materials written by Francisco E. Fujita and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics of New Materials starts from basic science, specially solid-state physics, and then moves into the research and development of advanced materials. The emphasis of the discussions is concentrated on the electronicand atomic structures and properties of transition-metal systems, liquidand amorphous materials, the nano-phase materials, layered compounds, martensite and other structural-transformed materials, and ordered alloys. Though these discussions, the physical aspects and principles ofnew materials, such as strong ferromagnetic alloys, shape memory alloys, amorphous alloys, ultra-fine particles, intercalated layered compounds, deformable ceramics, and nuclear-physics techniques. In addition to these theoretical treatments, modern experimental techniques, exemplified by M|ssbauer spectroscopy and electron microscopy, demonstrate the vast scope of schemes needed in the development of new materials.
Download or read book High Resolution Imaging and Spectrometry of Materials written by Frank Ernst and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The characterisation of materials and material systems is an essential aspect of materials science. A few decades ago it became obvious that, because the properties of materials depend so critically on the microstructure of their components, this characterisation must be determined to the atomic level. This means that the position - as well as the nature - of individual atoms has to be determined at "critical" regions close to defects such as dislocations, interfaces, and surfaces. The great impact of advanced transmission electron microscopy (TEM) techniques became apparent in the area of semiconducting materials, where the nature of internal interfaces between silicon and the corresponding silicides could be identified, and the results used to enhance the understanding of the properties of the compounds studied. At that time, advanced TEM techniques existed predominantly in the US. However, advanced TEM instrumentation was not available in the ma terials science and solid-state science communities in Germany. This gap was bridged by the late Peter Haasen who, after a visit to the US, initiated a Priority Programme on Microstructural Characterisation at the Volkswagen Foundation (Hannover). The programme was in effect from 1985 to 1997 and supported a wide range of research projects - from fundamental, trendy, innovative projects to projects in applied materials science.
Download or read book Electronic Structure and Magnetism of Complex Materials written by David J. Singh and published by Springer Science & Business Media. This book was released on 2003-03-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in electronic structure theory have led to a new understanding of magnetic materials at the microscopic level. This enables a truly first-principles approach to investigations of technologically important magnetic materials. Among the advances treated here have been practical schemes for handling non-collinear magnetic systems, including relativity, and an understanding of the origins and role of orbital magnetism within band structure formalisms. This book provides deep theoretical insight into magnetism, mahneatic materials, and magnetic systems. It covers these recent developments with review articles by some of the main originators of these developments.
Download or read book Organic Electronic Materials written by R. Farchioni and published by Springer Science & Business Media. This book was released on 2001-05-22 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review and tutorial offers a well-balanced survey of the fundamental ideas and relevant trends in modern research on both conducting polymers and organic molecular crystals. The reviews provide a more complete understanding of the underlying physics of the materials through the discussion of selected interconnected topics. The volume constitutes an insightful treatise and handy reference for researchers and students in the field.
Download or read book Computational Materials Design written by Tetsuya Saito and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of ten chapters which outline a wide range of technologies from first-principle calculations to continuum mechanics, with applications to materials design and development. Written with a clear exposition, this book will be invaluable for engineers who want to learn about the modern technologies and techniques utilized in materials design.
Download or read book Fundamentals of Ion Irradiated Polymers written by Dietmar Fink and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in two parts, this first comprehensive overview addresses all aspects of energetic ion irradiation of polymers. Earlier publications and review articles concentrated on selected topics only. And the need for such a work has grown with the dramatic increase of research and applications, such as in photoresists, waveguides, and medical dosimetry, during the last decade. The first part, Fundamentals of Ion Irradiation of Polymers covers the physical, chemical and instrumental fundamentals; treats the specific irradiation mechanisms of low- and high-energy ions (including similarities and differences); and details the potential for future technological application. All the new findings are carefully analyzed and presented in a systematic way, while open questions are identified.
Download or read book Transport Processes in Ion Irradiated Polymers written by Dietmar Fink and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second volume, Transport Processes in Ion Irradiated Polymers deals with transport processes in both unirradiated and irradiated polymers. As both a review and a stimulus, this work seeks to contribute substantially to the literature and advancement of polymeric devices, from both the low- and high-energy regimes.
